Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Enterprise, NV
Gate repair in Enterprise, NV runs anywhere from $145 for a simple limit switch replacement to $1,800+ for a full opener swap on a heavy iron driveway gate. Calder Gate Repair handles all of it: sprung hinges, dead control boards, sheared key brackets, gates that have sagged so badly they drag across the paver line. Enterprise is unincorporated Clark County, which means the gates here live a different life than the ones in master-planned Henderson or Summerlin. Hard desert sun, alkaline dust, constant wind, and an endless parade of delivery vans and ride-share drivers testing every gate motor on the block. If your gate won’t open or won’t stop opening, call (903) 417-0793 and we’ll give you a real arrival time and a written price before anything gets touched.
Why Enterprise Homes Are Different
Enterprise sits on the south side of the Las Vegas valley, a mix of large-lot custom homes, older horse properties off Dean Martin Drive, and newer infill developments squeezed between industrial pockets and the 215 beltway. The gate hardware out here takes direct desert exposure: UV radiation chews through plastic limit switch housings, monsoon-season dust storms pack fine grit into gear tracks, and the wind off the Spring Mountains yanks at cantilevered gates until their rollers flatten. We see a lot of gates that were installed by the original builder ten or fifteen years ago, with control boards that were never protected from the heat reflecting off stucco walls. And there is a patchwork quality to the lots themselves. You can have a 1970s ranch gate with a chain-link frame on one street, and two blocks over a new stucco community with matching wrought iron and HOA-mandated hardware. The repairs are not the same, because the installations were never the same. That matters when we quote a job. A gate hung on old round posts in caliche soil behaves differently than one hung on square steel columns set in concrete. We look before we price.
Crews serving Enterprise dispatch from the brand’s Las Vegas office, so call volume on the south side gets answered by someone who already knows the streets, not a call-center rep reading a script. When we say we’re ten minutes out, we mean it.
Our Main Enterprise Services
Enterprise homeowners call most about two things: a gate that physically won’t move, and an opener that runs but doesn’t move the gate. Every one of these jobs has its own page, linked below, so you can dig into what a repair looks like on your side of town.
Gate Repair in Enterprise
A sagging or dragging gate in Enterprise is usually a hinge problem, a wheel problem, or a post problem, and the desert makes all three worse. Caliche soil tightens and loosens around posts with every rain-dry cycle, so a gate that scraped before the last monsoon may drop another half inch by October. We straighten frames, re-weld broken brackets, replace crushed rollers, and re-hang gates so they swing true. This is the page for physical gate problems: binding hinges, cracked welds, broken pickets, sagging cantilevers. Gate Repair in Enterprise

Electric Gate Repair in Enterprise
Electric gate repair in Enterprise often comes down to what the heat and dust did to the wiring and the control board. Ground connections corrode faster here than almost anywhere in the valley because the soil is alkaline and the overnight temperature swings cause condensation inside the cabinet. We trace dead circuits, replace burned contactors, rebuild scorched terminal strips, and handle the safety loops and edge sensors that keep an automatic gate from closing on a car or a kid. Electric Gate Repair in Enterprise

Gate Opener Repair in Enterprise
When the motor runs but the gate doesn’t move, or the remote quits working, or the opener reverses halfway through its cycle, the problem is in the operator itself. We repair and replace opener arms, control boards, gearboxes, receivers, keypads, and limit switches – the small sensors that tell the gate when to stop. Most opener work in Enterprise is same-day or next-day because the parts are common enough to keep on the truck. Gate Opener Repair in Enterprise

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Enterprise
We’re factory-familiar with the openers most Enterprise homes actually have: Viking, Ghost Controls, DoorKing, and Elite, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We stock control boards, remotes, edge sensors, and photo eyes for these locally, so we’re not waiting on a freight truck before we can start. See our brands for the full list.
Pricing for Gate Company in Enterprise, NV
| Service | Typical range in Enterprise |
|---|---|
| Service call + diagnostic (first hour) | $85 – $145 |
| Limit switch replacement | $145 – $285 |
| Remote/programming repair or replacement | $125 – $265 |
| Hinge repair or replacement | $175 – $485 |
| Gate opener gear / sprocket replacement | $245 – $495 |
| Control board repair or replacement | $265 – $595 |
| Full gate opener replacement (residential) | $675 – $1,850 |
| Chain or belt replacement | $185 – $395 |
| Safety sensor / photo eye replacement | $155 – $325 |
| Roller / wheel replacement (per gate) | $75 – $225 |
What pushes price up in Enterprise is usually the gate itself, not the opener. A 14-foot solid steel driveway gate weighs a lot more than a 6-foot walk gate, and a welded-custom job on a hillside lot off Blue Diamond takes more time than a standard install on flat ground. We never open a panel without giving you the written price first, and the number on that sheet is the number on your invoice.
Neighborhoods We Serve in Enterprise
We cover the whole Enterprise area, from the older acreages south of Las Vegas Boulevard to the newer tracts along the 215. Typical response time during the week is inside two hours, and we carry enough common boards and arms to fix most openers on the first visit.
- Silverado Ranch
- Southern Highlands
- Mountain’s Edge
- Enterprise proper (Dean Martin / W. Serene area)
- Cornerstone Ranch
Service Area – Cities Near Enterprise
Beyond Enterprise itself, our trucks run routes through Las Vegas, NV, Henderson, NV, and North Las Vegas, NV. We also cover Spring Valley, CA for clients whose desert properties span the state line. If you’re not sure which service area covers your street, call and a live person will tell you.
Serving Enterprise, NV - Our Local Coverage Area
We’re based in the Enterprise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Enterprise
Most weekdays we’re at an Enterprise gate within two hours of your call. Evenings and weekends use the same dispatch line, and a live person answers 24/7, so you’ll get a real arrival time, not a voicemail. Call (903) 417-0793 for today’s schedule.
Most Enterprise HOAs only care about the appearance, not the hardware. If your gate faces the street and matches a community standard, a like-for-like motor or hinge repair usually needs no approval. But if you’re planning a full gate replacement, check your CC&Rs first: some communities require an architectural review. We can quote the repair either way.
Every visit includes the diagnostic, a written price before any work starts, and the 365-Day Done Right Promise: if the repair fails within the year, Calder returns at no charge. You also get the Relay Standard: a live, trackable arrival time, before-and-after photos, and a digital invoice you pay from a link. Call (903) 417-0793 for a free estimate on any gate job in Enterprise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Enterprise Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.





Before
After
Before
After
Before
After