Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Electric Gate Repair Nationwide
Electric gate repair is what happens when the motor, hinges, sensors, or control board on your automated gate stop doing their job. Most gate opener failures give you warning signs first – a grinding noise, a gate that reverses for no reason, a keypad that ignores your code – and catching those early saves hundreds over waiting for a full failure. Calder Gate Repair has been fixing electric gates since 2009 as the dedicated Los Angeles Electric Gate Repair division inside the Relay Home Co. family. We dispatch background-checked, uniformed technicians with a live, trackable arrival time, and you’ll know the written price before any work starts. Call (903) 417-0793 and a real person answers, 24/7.
Key Takeaways
- Most electric gate repairs are done the same day once a technician diagnoses the issue.
- You’ll receive a written price before any work starts – the invoice never surprises you.
- Every repair carries the 365-Day Done Right Promise, including a free second visit if the repair fails within a year.
- Calder Gate Repair is factory-familiar with LiftMaster, DoorKing, Elite, Mighty Mule, and five other major opener brands.
Automatic Gate Repair
Automatic gate repair covers everything that opens and closes your gate without you touching it – the operator arm, the receiver, the safety loops, the limit switches (the small sensors that tell the gate when to stop), and the wiring that ties it all together. You know you need it when the gate hesitates halfway, refuses a working remote, sits crooked on its track, or moves slower than it did last month. Calder Gate Repair technicians carry diagnostic tools that read fault codes from the control board, so we fix the actual cause instead of swapping parts on a guess. Most automatic gate repairs run $180 to $520 depending on what’s failed, and you’ll see that number in writing before we turn a single bolt. Check out our DIY vs Professional Electric Gate Repair: What’s Safe to Do Yourself guide to know when to call us.
Opener Arm and Motor Diagnostics
When the arm grinds or the motor hums but nothing moves, the issue is usually mechanical – stripped gears, a worn capacitor, or a misaligned travel stop. We bench-test the motor’s amp draw to confirm whether it needs replacement or just adjustment. The written quote you get includes parts and labor, no vague “plus materials” language.
Remote and Receiver Failures
If your clicker works only when you’re three feet away, or one code stopped working while another still opens the gate, the receiver board or antenna may be the culprit. We reprogram or replace receivers from LiftMaster, Linear, and other major brands, and we’ll pair every remote before we leave so you’re not stuck re-syncing later.
Electric Gate Motor
An electric gate motor is the muscle that swings or slides your gate open and closed. When it fails, the gate either won’t move at all, moves in jerks, or trips its own breaker repeatedly – and that’s when you need a technician who knows motor windings and gear ratios, not just someone with a multimeter. Calder Gate Repair replaces or rebuilds gate motors from DoorKing, Elite, Mighty Mule, FAAC, and BFT, among others. A replacement electric gate motor with installation typically runs $450 to $1,200 depending on the gate’s weight, the motor’s duty cycle, and whether we can reuse your existing mounting plate. We’ll show you the exact number before ordering anything.
Motor Replacement vs. Rebuild
Some motors can be saved with a capacitor, a gear swap, or new internal bearings. Others, especially units on heavy gates that were undersized from the start, need full replacement. Calder Gate Repair will tell you which one you’re looking at, with numbers for both paths, so you can decide without pressure.
Weight and Duty Cycle Considerations
A 14-foot iron gate weighs a lot more than a 10-foot aluminum one, and a gate that cycles 80 times a day on a shared driveway needs a heavier-duty motor than one that opens twice a week. We size the motor to the gate, not the other way around, which is why our motors last longer than a generic swap.
Gate Access Control
Gate access control is the system that decides who gets in – keypads, intercoms, phone-based entry, vehicle detection loops, and the control boards that process all of it. You need it repaired when codes stop working, the intercom audio drops out, the gate ignores a vehicle on the loop, or the system resets itself overnight. Calder Gate Repair fixes all of it on-site, including programming new codes and testing every entry point before we pack up. Access control repairs usually run $150 to $600, with the final cost depending on whether it’s a keypad swap, a board repair, or a full loop detector replacement. Same deal applies: written price first, every time.
Keypad and Code Entry Repairs
A dead keypad is usually one of four things: dead batteries, corroded wire terminals, a fried board, or a misconfigured code set. We diagnose it in under an hour and can reprogram temporary access for a tenant or contractor while you wait, so you’re never locked out of your own property.
Vehicle Loop and Sensor Issues
If your gate starts closing on cars, the underground vehicle detection loop has likely failed or shifted. We use a loop tester to confirm the frequency and can cut and re-seal a new loop same-day in most cases. This is a safety item, not a convenience – a gate that closes on a car can do real damage.
Commercial Gate Operator
A commercial gate operator is the industrial-grade unit that runs an apartment complex gate, a business parking lot, or any gate that cycles dozens or hundreds of times a day. When it fails, tenants call the property manager, residents block the entrance, and delivery trucks can’t get in – so speed and correct-diagnosis matter more than anything. Calder Gate Repair services commercial operators from LiftMaster’s heavy-duty line, DoorKing, FAAC, and Viking. Repairs run $300 to $1,500 depending on whether it’s a control board, a hydraulic pump, a chain drive, or a full operator replacement. We quote the repair in writing before work begins and carry common commercial parts on the truck to avoid second and third visits.
High-Cycle Duty Operators
Gates on busy commercial properties need operators rated for continuous or high-cycle duty. Installing a residential opener on a commercial gate is how you get a burned-out motor in six months – we see it often. We spec the right duty cycle for your actual traffic count, not the cheapest unit that fits.
Safety System Compliance for Businesses
Commercial operators use photo eyes, reversing edges, and sometimes exit loops to protect people and vehicles. If your gate’s safety features aren’t working, we treat that as an urgent repair, because the liability risk is real. We’ll test every safety input and document it in your digital invoice, so you have a paper trail.
Brands We Service
We’re factory-familiar with nine major opener brands, and that means we know the quirks of each. LiftMaster units, for example, throw specific fault codes for force settings that generic repair technicians often misread. We’ve rebuilt enough DoorKing control boards to know which capacitors fail first, and Elite operators have their own wiring conventions that we’ve mapped over hundreds of service calls.
Mighty Mule is the most common brand we see on residential driveways, and most Mighty Mule failures come down to three things: the arm, the battery, or the control board. Whatever make is on your gate – whether it’s one of those nine or something less common – we can diagnose it, quote it, and fix it. You can start with the home page to explore our full range of services.
Signs You Need a Pro Right Now
- Gate reverses after closing. This usually means the force setting is off or the safety sensor is misaligned. If it’s the force setting, the gate is pressing harder than it should before reversing – that’s a safety hazard.
- Motor hums but gate doesn’t move. A humming motor with no movement points to a stripped gear or a locked-up drive train. Running it in this state can burn out the motor entirely.
- Gate opens or closes on its own. This is often a failing receiver or a short in the wiring. A gate that opens by itself at 3 a.m. is a security problem, and it won’t fix itself.
- Remote works only from a few feet away. The receiver board or antenna may be failing, or the frequency is being stepped on by a new neighbor’s device. We can test and re-tune it on-site.
- Keypad accepts the code but nothing happens. The keypad can be fine while the board that receives its signal has failed. This one’s confusing because the keypad beeps like everything’s working – but the gate never moves.
Our Process, Step by Step
- 1
Call or book online, talk to a person. When you call (903) 417-0793, a live person answers – no voicemail tree, no chatbot. We’ll ask what the gate is doing, what brand it is, and when you need us there. You’ll get a trackable arrival time, not a four-hour window.
- 2
Technician arrives and diagnoses. Our technician shows up in uniform, background-checked, and ready to work. We read fault codes from the control board, test the motor, check the safety sensors, and explain what we found in plain language – “limit switch” becomes “the sensor that tells the gate when to stop.”
- 3
Written price before any work starts. You’ll get the full job cost in writing: parts, labor, everything. The number on the invoice at the end is the number you approved before we started. If something changes mid-repair because a second part is needed, we stop and get your approval again.
- 4
Repair, test, and document. We fix the issue, then run the gate through at least ten full cycles while checking force settings and safety reverses. You’ll get before-and-after photos and a digital invoice you can pay from a link – no paper, no phone calls to settle up.
- 5
365-Day Done Right Promise. Every repair is backed in writing for a full year. If the same repair fails within 365 days, Calder Gate Repair returns at no charge. That’s not a sales line – it’s written into your invoice.
How Much Does Electric Gate Repair Cost?
A typical electric gate repair runs $180 to $520 for most common failures – a bad limit switch, a failed receiver, a keypad replacement, a force adjustment. On the higher end, a full electric gate motor replacement with installation runs $450 to $1,200 depending on gate weight and motor type. Commercial gate operator repairs run $300 to $1,500 since those units are heavier-duty and parts cost more. The biggest cost variable is the control board: some boards are $80, some are $400, and diagnosing which one you have is exactly what we do before quoting anything.
What affects the price: the gate’s weight and size, whether parts are in stock locally or need to be ordered, and whether the installation is residential or commercial-grade. To avoid overpaying, get a written quote that breaks out parts and labor – and be wary of anyone who quotes a repair without looking at the gate. Our free estimate includes the diagnostic, the written price, and a clear explanation of what’s urgent and what can wait.
Where We Work
Calder Gate Repair serves homeowners and businesses across the United States through a network of local crews inside the Relay Home Co. family, which has operated since 2009. Each location is independently owned and operated under The Relay Visibility Guarantee. Wherever you are, you get the same standard: a live person on the phone, a trackable arrival time, a written price, and the 365-Day Done Right Promise on every job.
Frequently Asked Questions About Electric Gate Repair
Electric gate repair means fixing any component of an automated gate system – the motor, control board, sensors, remotes, keypads, hinges, or wiring – so the gate opens and closes safely again. It covers both swing gates and slide gates, residential and commercial. Calder Gate Repair has handled electric gate repair across the United States since 2009, including Electric Gate Repair - Huntington Park, always with a written price before work starts.
Most electric gate repairs are completed in one visit, usually 1 to 3 hours on-site. If a specific part isn’t on the truck, we’ll order it and tell you exactly when it arrives and when we’ll return. You’ll never be left guessing – the technician confirms the timeline before leaving.
Most electric gate repairs run $180 to $520, while full motor replacements run $450 to $1,200, and commercial gate operator repairs run $300 to $1,500. Your written quote before any work starts includes parts and labor, so the final invoice matches what you approved. Call (903) 417-0793 and we’ll walk through what your specific gate likely needs.
Yes, we’re factory-familiar with LiftMaster openers, along with DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls. We know the fault codes specific to each brand and stock common OEM parts. Most LiftMaster repairs are diagnosed and fixed the same day.
Yes. A live person answers our calls 24 hours a day, 7 days a week, and we dispatch technicians for urgent repairs when a gate is stuck open, stuck closed, or poses a safety risk. For non-urgent issues, we’ll schedule the earliest available slot that works for you.
Every repair carries the 365-Day Done Right Promise: if the repair fails within 365 days, Calder Gate Repair returns at no charge. The guarantee is stated in writing on every invoice. We also provide a free second visit if a repair fails – it’s included with every job, never an add-on.
Clear the area around the gate so the technician can access the motor, control box, and hinges. If you have remotes or keypad codes, have them ready to test. And if the gate is stuck in a position that blocks access to your driveway, tell us when you call – we’ll prioritize your visit accordingly.
Schedule Your Electric Gate Repair Service Today
A gate that won’t open isn’t going to fix itself, and a gate that acts erratically is a safety risk for your family or tenants. Call Calder Gate Repair at (903) 417-0793 right now. A live person answers 24/7, the estimate is free, and you’ll get a written price before any work begins – with the 365-Day Done Right Promise behind it.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving customers across the United States since 2009.