Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Atherton, CA
Calder Gate Repair is the dedicated gate company serving Atherton, CA, with repair, electric gate, and gate opener work handled by background-checked technicians who arrive in uniform and put a written price in front of you before anything starts. Atherton’s sprawling lots, mature landscaping, and quiet residential character mean gates here tend to be long, heavy, and built into custom fencing or stone pillars, so the work requires measured, careful repairs rather than quick part swaps. If your gate is dragging, stuck, or refusing to open, call (903) 417-0793 and a live person answers, day or night.
Why Atherton Homes Are Different
Atherton’s housing stock is dominated by large estate properties on lots that often exceed half an acre, and most driveway gates are wide and solid – steel, iron, or heavy wood – which puts real stress on hinges, wheels, and opener motors. The town’s flat terrain sounds forgiving, but it means water management matters more: drainage near gate posts is a recurring factor in Atherton, and posts that sit in poorly drained soil shift over time, which then throws the gate out of alignment and burns out the motor chasing a misaligned track.
Town regulations in Atherton are famously particular. Fence height, setback, and gate design can all fall under local planning review, and many properties are subject to tree-protection rules that affect where a gate or its operator can sit. If a gate post has to move even slightly, homeowners often need to check with the town first. We work with what’s already approved and don’t make changes that could create a compliance headache for you later. Lindenwood, West Atherton, and the Atherton Oaks area each have their own rhythm, but across all of them the pattern is the same: large gates, custom operators, and homeowners who expect the job done right the first time.
Our Main Atherton Services
Atherton homeowners call us most often for two things: a gate that has stopped moving and an opener that makes noise but won’t actually open the gate. Each service has its own Atherton page with full detail, local pricing, and FAQs.
Gate Repair in Atherton
Physical gate repair in Atherton usually means dealing with heavy swinging or sliding gates that have slipped on their hinges, bent a wheel track, or cracked a weld. Mature trees near driveway entrances are common here, and root growth under a gate’s track or wheel path is a regular culprit in misalignment. We inspect the full arc of the gate, correct the alignment, and repair or replace damaged hardware. Gate Repair in Atherton covers what the job includes and what it typically costs.
Electric Gate Repair in Atherton
Electric gate systems in Atherton often pair a heavy gate with a motor, safety sensors, and keypad or intercom access, and when one component fails, the whole system stops. We trace the power, test the safety edges and photocells, and diagnose the fault before replacing parts. Atherton’s large properties sometimes mean long wire runs from the house to the gate, and those runs can develop breaks over time. Electric Gate Repair in Atherton explains the diagnosis process and pricing.
Gate Opener Repair in Atherton
When the opener is the problem, the gate itself is usually fine, but the motor hums, clicks, or does nothing. We repair and replace opener components across nine major brands, including FAAC, BFT, Linear, and Viking, which covers the operators most commonly installed on Atherton’s estate gates. We test the full cycle after the repair, not just the motor in isolation. Gate Opener Repair in Atherton breaks down common opener failures and what repair runs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Atherton
Calder Gate Repair technicians are factory-familiar with nine leading gate opener brands, and in Atherton we see a lot of FAAC, BFT, Linear, and Viking on residential estates. Common parts for these brands are stocked on our local trucks. See our brands for the full list.
Pricing for Gate Company in Atherton, CA
| Service | Typical range in Atherton |
|---|---|
| Gate opener motor replacement | $450 – $850 |
| Control board replacement | $250 – $450 |
| Limit switch replacement | $150 – $300 |
| Sensor or photocell replacement | $120 – $250 |
| Wheel or roller replacement | $200 – $450 |
| Hinge replacement | $150 – $400 |
| Gate spring replacement | $180 – $350 |
| Welding repair | $200 – $500 |
| Track alignment | $150 – $350 |
Large, heavy gates and custom metalwork push Atherton prices toward the upper end of these ranges, as does any repair that requires matching an existing finish or working around mature landscaping. Whatever the number is, you get it in writing before we touch a bolt, and the invoice matches the quote.
Neighborhoods We Serve in Atherton
We work across all of Atherton, including the areas where gates are largest and most custom.
- Lindenwood
- West Atherton
- Atherton Oaks
- Las Lomitas
- Menlo Circus Club area
Because our San Francisco Bay Area office coordinates local dispatch, we typically reach Atherton homes the same day for urgent repairs.
Service Area – Cities Near Atherton
Beyond Atherton, Calder Gate Repair serves homeowners in Menlo Park, CA, Redwood City, CA, Palo Alto, CA, and Stanford, CA. If you live in a neighboring community, the same written pricing and 365-Day Done Right Promise apply.
Serving Atherton, CA - Our Local Coverage Area
We’re based in the Atherton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Atherton
Most Atherton repair calls are reached the same day. A live person answers our phones 24/7, so you’ll know exactly when your technician is arriving, and you can track that arrival in real time. Call (903) 417-0793 for urgent or routine gate issues.
In most cases, repairing or replacing existing gate hardware on the same footprint does not require Atherton planning review. If a post needs to move, or the gate position changes, town rules may apply. We stick to the existing layout unless you have an approval in hand.
Always. Every Atherton job, big or small, gets a written price before the work begins. The invoice you pay matches that written quote, and every repair carries our 365-Day Done Right Promise, which includes a free second visit if the repair fails within the year.
For gate repair, electric gate service, or opener replacement in Atherton, call Calder Gate Repair at (903) 417-0793 for a free estimate. Nico Alvarez leads our team, and the number on your invoice will be the number you agreed to before we started.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Atherton Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.