Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Surfside, FL
Calder Gate Repair is the gate company Surfside homeowners call when a gate stops opening, starts grinding, or refuses to close. Most gate repairs in Surfside run $180 – $340 before parts, and we quote that price in writing before any work begins. Surfside’s mix of mid-century homes, newer condos, and oceanfront properties means we see everything from salt-corroded hinges to opener boards fried by storm surges. Call (903) 417-0793 and you’ll reach a live person, not a voicemail.
Why Surfside Homes Are Different
Surfside sits on a narrow barrier island between Biscayne Bay and the Atlantic, which means one thing for every gate: salt. We regularly replace hinge pins and opener arms in Surfside that have corroded years earlier than identical hardware would inland. Homes along Collins Avenue and 96th Street get the brunt of it, with ocean breeze carrying salt spray directly onto driveway gates and pedestrian gates alike.
The housing stock matters too. Many Surfside condos built before 1990 run FAAC or BFT hydraulic operators that are no longer in production, so repair means troubleshooting rather than simple replacement. Single-family homes in the Harding Avenue corridor often have sliding gates on concrete tracks that shift after heavy rain, throwing the limit switch out of alignment. HOAs in Surfside also tend to require board approval before any gate hardware change, so we’re used to providing written specs and the Relay Standard before-and-after photos for community records. Nico Alvarez, our lead technician, keeps common FAAC and BFT parts stocked specifically for Surfside’s older buildings.
Our Main Surfside Services
Most calls we take in Surfside fall into three buckets: a gate that won’t budge, an electric system that trips or shorts, or an opener that remote won’t talk to. Each has its own Surfside page with full pricing and detail.
Gate Repair in Surfside
This is the physical gate itself: hinges, wheels, tracks, posts, and alignment. In Surfside, we see a lot of rusted hinge pins on swing gates and sand-packed tracks on slide gates, especially on properties within a few blocks of the beach. We handle broken welds, sagging gates, and gate panels that have dropped after a storm. The fix usually means aligning the gate first, then addressing whatever wore out. See the full breakdown on Gate Repair in Surfside.
Electric Gate Repair in Surfside
Electric repairs cover everything bending current: wiring, control boards, safety sensors, loop detectors, and the power run from the house. Salt corrosion is a regular culprit in Surfside, eating through low-voltage wiring and terminal blocks faster than you’d expect. We trace circuits, replace damaged wire runs, and rebuild connections so they survive the coastal air. Details are on the Electric Gate Repair in Surfside page.
Gate Opener Repair in Surfside
If the gate is physically fine but won’t respond to a remote, keypad, or the open button, the opener is the problem. We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers, so we don’t need to convince you to replace a whole system to fix a $40 part. Full pricing and same-day availability is on the Gate Opener Repair in Surfside page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Surfside
We’re factory-familiar with FAAC, BFT, Linear, and Viking, plus five other major opener brands, and we keep common boards, remotes, and limit switches on the truck for Surfside calls. That usually means same-trip fixes instead of a second dispatch. See our brands for the full lineup.
Pricing for Gate Company in Surfside, FL
| Service | Typical range in Surfside |
|---|---|
| Gate opener repair | $180 – $340 |
| Electric gate repair | $195 – $455 |
| Gate realignment | $140 – $280 |
| Hinge replacement | $160 – $300 |
| Track repair or replacement | $270 – $520 |
| Control board replacement | $240 – $480 |
| Remote and keypad programming | $60 – $130 |
| Safety sensor replacement | $120 – $230 |
| Gate wheel or roller replacement | $110 – $210 |
In Surfside, prices push higher when salt corrosion has spread into wiring or the operator housing, or when an HOA requires spec documentation before approval. What doesn’t change: you get a written price before any work starts, and that’s the number on the invoice.
Neighborhoods We Serve in Surfside
We cover all of Surfside, from the condo towers along Collins Avenue to the single-family streets west of Harding and everywhere around the 96th Street shopping district. Response times in Surfside are typically within one to two hours for urgent repairs.
- Collins Avenue corridor
- Harding Avenue residential streets
- 96th Street district
- Bay Drive and the bayfront blocks
- Central Surfside between 92nd and 95th
Service Area – Cities Near Surfside
Surfside is our primary coverage area, and we also run calls into neighboring Miami, FL for coastal properties facing the same salt and storm conditions. For homeowners further out, we coordinate jobs from our South Florida dispatch office and can route crews toward Jacksonville, FL, Tampa, FL, and Orlando, FL.
Serving Surfside, FL - Our Local Coverage Area
We’re based in the Surfside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Surfside
For urgent gate failures in Surfside, we typically arrive within one to two hours. The dispatch is coordinated from our South Florida office, and you get a live trackable arrival time when you book. Call (903) 417-0793 and a person answers, day or night.
Many Surfside buildings and HOAs require board approval before gate hardware is changed, especially on shared or street-facing gates. We can provide written specs and before-and-after photos through the Relay Standard to make that approval fast. If your HOA has questions, give us the property manager’s contact and we’ll handle it.
Salt corrosion is part of living in Surfside, but the right materials and sealing make a real difference. We use marine-grade hardware where possible and re-treat connections with corrosion inhibitor during electric repairs. That extends the repair’s life meaningfully compared to standard inland parts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Surfside Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.