Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Kensington, CA
Gate repair in Kensington, CA means working on hillside properties where a gate isn’t just curb appeal. It’s often the only thing between a home and a road with real grade, which puts extra strain on hinges, openers, and tracks. Kensington’s mix of mid-century ranch homes and newer hillside builds means we see everything from original swing gates on aging posts to newer automatic systems with sensor wiring run across uneven terrain. If your gate is dragging, stuck, or refusing to close, call (903) 417-0793 and we’ll get a technician out to look at it.
Why Kensington Homes Are Different
Kensington sits just north of Berkeley in the East Bay hills, and the terrain shapes nearly every gate job here. A lot of driveways slope up from the street, which means a gate that’s slightly off-track becomes a bigger problem faster than it would on flat ground. Gravity is working against the gate every time it cycles. We routinely find that what starts as a “gate is noisy” call in Kensington turns out to be a hinge or post issue caused by the weight of the gate leaning downhill.
Housing stock matters too. Many Kensington homes were built between the 1930s and 1960s, and a surprising number still have their original gate posts. Concrete from that era can crack around the post base, and once the post shifts, the gate binds. Newer hillside homes often have automatic gates installed to begin with, but the wiring may have been run before the landscaping, and roots or drainage work can nick a low-voltage line. Kensington’s microclimate also means marine fog and moisture through much of the year, which accelerates corrosion on exposed gate hardware. Galvanized or powder-coated parts hold up better here, and we factor that into every repair recommendation.
Permits are rarely required for the repair work we do, since we’re restoring existing equipment rather than adding new structures. But if a post needs to be reset in concrete or a gate is being replaced entirely, some Kensington properties fall under East Bay hillside grading rules, so a conversation with the planning department may be needed. We’ll flag it early if your job crosses into that territory.
Our Main Kensington Services
The two calls we get most from Kensington homeowners are gates that have stopped opening entirely and gates that work intermittently, usually tied to an opener or a sensor issue. Each service below has its own dedicated Kensington page with deeper detail.
Gate Repair in Kensington
Gate repair covers the physical gate itself: hinges, rollers, tracks, posts, and the frame. In Kensington we see a lot of post-shift problems, because when a gate post leans even a couple of degrees on a hillside, the gate starts dragging and the opener works harder than it should. We carry replacement hinges, rollers, and post brackets on the truck, and most mechanical fixes can be completed in one visit. Gate Repair in Kensington
Electric Gate Repair in Kensington
Electric gate repair means the powered side of the system: the motor, the control board, the safety sensors, and the low-voltage wiring that ties it all together. Kensington’s older hillside homes often have wiring run decades ago, and moisture or overgrown landscaping can compromise those lines. We diagnose the fault on-site, quote a written price before any work starts, and get the gate cycling again correctly. Electric Gate Repair in Kensington
Gate Opener Repair in Kensington
Gate opener repair focuses on the operator unit itself and its programming. Kensington homeowners with automatic gates usually have either an older chain-driven opener or a newer Linear or DoorKing unit, and each has its own failure patterns. Limit switch problems, remote programming resets, and gear wear are all common here. We support LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Gate Opener Repair in Kensington
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kensington
Most Kensington gates run on Linear, Viking, Ghost Controls, or DoorKing equipment. We’re factory-familiar with all of them and keep common parts for each in our Bay Area stock, so turnaround is usually measured in hours, not weeks. Not sure what brand you have? Send us a photo of the opener and we’ll identify it before dispatch. You can also see our brands for the full list we service.
Pricing for Gate Company in Kensington, CA
| Service | Typical range in Kensington |
|---|---|
| Diagnostic visit and assessment | $75 – $125, credited toward repair if you proceed |
| Gate won’t open or close – mechanical fix | $150 – $350 |
| Hinge replacement (pair) | $120 – $280 |
| Roller replacement | $40 – $120 per roller |
| Post reset or re-securing in concrete | $300 – $700 |
| Gate opener motor replacement | $350 – $850 |
| Control board replacement | $200 – $500 |
| Safety sensor replacement | $90 – $200 |
| Remote programming or replacement | $40 – $150 |
Kensington’s hillside lots sometimes push labor up: the steeper the driveway, the more time we spend making sure the gate is level. Rust or post-shift found mid-job can add line items too, but nothing changes without your sign-off. Every price is written and agreed before a single bolt is turned.
Neighborhoods We Serve in Kensington
We work all over Kensington, from the flat approaches near Colusa Avenue up to the steep lots off Purdue Avenue and along the hillside streets that wrap toward Tilden Regional Park. Response time for the Kensington area is typically same-day or next-day, depending on call volume.
- Colusa Circle area
- Arlington Avenue corridor
- Near Tilden Regional Park
- Purdue Avenue hillsides
- Cohasset Road area
Service Area – Cities Near Kensington
Our Kensington crews also serve the wider Bay Area and take calls across California. You can reach us for gate work in San Francisco, CA, San Jose, CA, Los Angeles, CA, or San Diego, CA. Dispatch is coordinated from our San Francisco Bay Area office, and every job carries the same written price and 365-Day Done Right Promise.
Serving Kensington, CA - Our Local Coverage Area
We’re based in the Kensington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kensington
Same-day service is available for most Kensington calls when you reach us before early afternoon. Hillside and emergency jobs get prioritized, and you’ll receive a live arrival time you can track, not a four-hour window. Call (903) 417-0793 to check today’s availability.
Most repair work doesn’t trigger a permit, since we’re restoring existing equipment. But if your gate post needs new concrete or the gate itself is being replaced, hillside grading rules can apply in parts of Kensington. We’ll tell you before any work begins if your job needs approval.
We cover the entire Kensington area, from Colusa Circle to the hillside streets bordering Tilden Park. If your gate is on a steep driveway or a narrow road, our techs are used to it. Same-day dispatch for the whole Kensington area, and call (903) 417-0793 for a free estimate.
If your gate needs attention in Kensington, call (903) 417-0793. You’ll speak with a live person, get a straight answer on price, and we’ll schedule a technician with a real arrival time. Written estimate before any work, guaranteed.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kensington Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.