Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Pembroke Pines, FL
Gate repair in Pembroke Pines, FL comes down to three things: salt and humidity working on metal year-round, a mix of 1980s swing gates and newer slide openers, and HOAs that expect gates to look right and run quietly. Calder Gate Repair handles all of it. We’re the dedicated gate specialist inside the Relay Home Co. family, and we show up with a written price before any work starts. If your gate won’t open, grinds when it moves, or sits crooked on its posts, call (903) 417-0793 and a real person answers, day or night.
Why Pembroke Pines Homes Are Different
Pembroke Pines sits a few miles inland from the Atlantic, which means two forces are always working against gate hardware: humidity that corrodes circuit boards and connections, and afternoon storms that push gates to open and close harder than they were set for. Homes in Chapel Trail and SilverLakes tend toward slide gates on concrete pads, and when a pad shifts even half an inch, the gate binds. Older sections of Pembroke Pines and University Drive corridors still have swing gates on steel posts that slowly lean into the hinges. We see more limit switch failures there, and more rust along the bottom rail of gates that sit near sprinkler overspray.
Many Pembroke Pines communities operate under HOA rules about gate appearance and repair timing. A broken gate at the entry of a Chapel Trail or Pembroke Falls home is rarely a “get to it next month” item. We schedule around HOA deadlines, quote the work in writing, and tell you the actual arrival time, tracked live, so you’re not sitting home through a four-hour window.
Our Main Pembroke Pines Services
Pembroke Pines homeowners call us most for two things: a gate that stopped moving entirely, and an opener that makes the right sound but does nothing. Below are the three services we run daily across the city, each with its own dedicated page for deep detail.
Gate Repair in Pembroke Pines
A gate that drags, sags, or won’t close all the way in Pembroke Pines is usually a hinge, wheel, or post problem, worsened by our wet season. We straighten posts, replace rusted hinges and wheels, and re-set slide gates so they track clean instead of chewing up the opener’s gear. If the problem is a limit switch, the small sensor that tells the gate when to stop, we adjust or replace it same day when parts are in the truck. Gate Repair in Pembroke Pines covers the full scope and typical costs.

Electric Gate Repair in Pembroke Pines
Electric gate problems in Pembroke Pines usually start after a storm or a power flicker. A control board can survive humidity for years and then fail the week a capacitor gives out. We test the motor, transformer, and safety edges, the pressure-sensitive strips that stop a closing gate if something is in the way, and repair what’s failed rather than selling you a whole new system. Electric Gate Repair in Pembroke Pines walks through the common failure points.

Gate Opener Repair in Pembroke Pines
Opener repair is the most common call we run in Pembroke Pines. It’s usually one of three failures: a stripped plastic gear, a dead capacitor, or a control board that lost its memory. Calder techs are factory-familiar with nine major brands and carry common parts for LiftMaster, FAAC, BFT, and Linear on the truck, so a single visit clears most issues. Gate Opener Repair in Pembroke Pines details pricing by failure type.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Pembroke Pines
We service Linear, Viking, Ghost Controls, and DoorKing openers throughout Pembroke Pines, along with five other major brands. We keep common gears, capacitors, and control boards stocked for these four lines locally, which keeps most calls to a single visit. See our brands for the full nine-brand list.
Pricing for Gate Company in Pembroke Pines, FL
| Service | Typical range in Pembroke Pines |
|---|---|
| Gate opener gear replacement | $180 – $340 |
| Control board replacement | $220 – $450 |
| Capacitor replacement | $90 – $160 |
| Limit switch adjustment or replacement | $80 – $150 |
| Hinge replacement (swing gate) | $150 – $320 per hinge |
| Wheel or roller replacement (slide gate) | $120 – $250 per wheel |
| Safety edge replacement | $110 – $200 per edge |
| Motor replacement | $350 – $700 |
| Post straightening | $200 – $500 |
Two things push prices up in Pembroke Pines: rusted fasteners that take longer to break loose on older gates, and HOAs that require matching hardware or specific finishes. Whatever the number comes to, you get it in writing before we turn a single bolt. The price on the invoice is the price you approved at the door.
Neighborhoods We Serve in Pembroke Pines
We run calls across all of Pembroke Pines, from the lakeside communities on the west side to the University Drive corridor. Our dispatch is coordinated from the Miami (South FL) office, and crews are in Pembroke Pines most days before 10 a.m.
- Chapel Trail
- SilverLakes
- Pembroke Falls
- Westfork
- Pembroke Pines city center, near University Drive
Service Area – Cities Near Pembroke Pines
Calder Gate Repair covers Pembroke Pines and the surrounding Broward and Miami-Dade communities. We regularly send crews to Miami Gardens, FL, Plantation, FL, Hialeah, FL, and North Miami Beach, FL for the same written-price, trackable-arrival service.
Serving Pembroke Pines, FL - Our Local Coverage Area
We’re based in the Pembroke Pines area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pembroke Pines
Most Pembroke Pines calls are handled same day when you call before early afternoon, and emergency calls are answered by a live person 24/7. You get a trackable arrival time when you book, not a four-hour window. Call (903) 417-0793 and we’ll tell you exactly when a tech can be at your gate.
If your gate faces a community road or your HOA governs exterior appearance, you may need to match the existing style or finish. We can note the current hardware and recommend like-for-like replacements so your repair clears the HOA review without back-and-forth.
Yes. Pembroke Pines is our core service area, but we dispatch to Miami Gardens, Plantation, Hialeah, North Miami Beach, and the surrounding communities. Every job gets the same written guarantee and free second visit if the repair fails within 365 days.
If your gate is down, dragging, or making a sound it never made before, call Calder Gate Repair at (903) 417-0793. A real person answers, the estimate is free, and the price is in writing before we start.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pembroke Pines Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.





Before
After
Before
After
Before
After