Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Broadview Park
Electric gate repair in Broadview Park typically runs $180 – $640 for most operator and control board jobs, with same-day service available for urgent failures. We’re the dedicated Electric Gate Repair team at Calder Gate Repair, part of the Relay Home Co. family, and we know exactly how Broadview Park’s canal-side lots, tight setbacks, and wet-season flooding chew through gate operators, hinge posts, and safety sensors faster than inland properties. If your gate is stuck, grinding, or refusing to close, call (903) 417-0793 and a live person answers 24/7 with a real arrival time you can track.
Why Calder Gate Repair Is Broadview Park’s Preferred Electric Gate Repair Company
Broadview Park homeowners call us because we treat their gate like a security barrier, not a weekend project. The neighborhood is distinctly residential, with hundreds of canal-front and swale-adjacent lots along streets like Riverland Road and SW 20th Street, where an unreliable gate doesn’t just annoy you, it leaves your driveway exposed to through-traffic. Our technicians are background-checked, uniformed, and dispatched with a live, trackable arrival time so you know exactly when we show up. No four-hour windows. No phone tag.
Every repair carries the 365-Day Done Right Promise in writing. If the repair fails within a year, we return free. You also get a written price before any work starts, meaning the number on the invoice is the number you agreed to at the door. Nico Alvarez, who leads Calder Gate Repair, built the team around one rule: fix the gate correctly, document what was done, and stand behind it. That’s how you earn trust on a street where neighbors talk over the fence line about which contractors actually answer the phone.
We coordinate dispatch for Broadview Park from our South Florida office, which means crews are local, parts are stocked nearby, and we’re not guessing at your neighborhood from three counties away.
Gate Access Control in Broadview Park
Gate Access Control in Broadview Park means the full setup that lets the right people in and keeps everyone else out: the operator, keypads, remotes, intercom, vehicle detection loops, and the safety sensors that meet UL 325 entrapment standards. Most Broadview Park homes we service have standalone swing gates at the driveway edge, often squeezed between a house wall and a drainage swale, so the access control wiring has to be routed carefully and the keypad has to be placed where you can reach it from the driver’s seat without blocking the sidewalk. A complete access control package, including a new operator, keypad, two remotes, and photocells, typically lands between $1,800 and $3,200 depending on gate length and condition of the existing post footings.
Keypads and Remote Programming
Failed entry codes and remotes that work only from inside the car are common complaints in Broadview Park, especially after heavy rain corrodes the keypad’s internal contacts. We test every button, reprogram all remotes to the same receiver, and replace weather gaskets so the next storm doesn’t leave you keying in a code from the passenger window. A standard keypad replacement runs $140 – $260 including the part.
Intercom and Vehicle Detection
On longer driveways or canal-front homes where the gate is set back from the road, an intercom or vehicle loop makes daily entry bearable for you and impossible for tailgaters. We install and repair wired and wireless intercoms, then tune the vehicle detection loop so the gate opens for your car but not for a passing pickup on State Road 7. Expect $320 – $780 for intercom work and $260 – $610 for loop detection repair.
Commercial Gate Operator in Broadview Park
Commercial Gate Operator work in Broadview Park covers the heavier-duty swing and slide operators used on multi-unit driveways, small office lots, and the occasional church or storage facility tucked into the neighborhood’s residential grid. These operators run on higher duty cycles and fail differently than residential units, usually in the motor capacitor, limit switch, or the gearbox that strips after years of ungreased use. A commercial-grade operator replacement in Broadview Park, installed and tested, runs $1,900 – $4,400 depending on gate weight and whether the post footings need reinforcement. We never promise same-day installation on commercial jobs because proper anchoring and safety reversal testing take time.
Slide Gate Operator Replacement
Slide gates are rare on Broadview Park’s tight residential lots, but we do see them on small commercial properties where there’s just enough side clearance to run a track. The operator usually sits at the gate’s back post, low to the ground, which means we raise it onto a concrete pad and verify drainage before mounting a new unit. Slide operator replacement starts around $2,200.
Swing Gate Operator Upgrade
Older commercial swing gates in Broadview Park often have mismatched hinge geometry because the post settled or the gate was welded to fit a slightly off-square opening. We install operators from Viking, Ghost Controls, and DoorKing that tolerate common misalignment, then set limit switches and force sensitivity so the gate closes fully without slamming the latch post. Budget $1,900 – $3,600 for a complete commercial swing upgrade.
Trusted Brands We Service in Broadview Park
Our techs are factory-familiar with nine major opener brands, and in Broadview Park we see a mix of older residential and light-commercial equipment. Ghost Controls appears on many newer swing gates because of its solar capability, which suits lots without a convenient power run to the gate. DoorKing shows up on multi-family driveways and small commercial lots, and Viking is common on older slide gates. We keep common boards, remotes, and safety edge parts stocked for these brands locally, so a control board swap usually doesn’t mean waiting on a freight shipment. If your opener is off-brand or discontinued, we’ll tell you honestly whether it’s worth repairing or better to replace.
Common Electric Gate Repair Problems We See in Broadview Park Homes
- Operator enclosures sitting in swale overflow. Broadview Park’s drainage swales back up during Broward County’s summer downpours, and gates built low to the ground end up with water in the operator box. We regularly replace corroded control boards and limit switches on units that were never raised onto a proper pad.
- Hinge post rot and footing settlement. Tight lots mean gates swing close to house walls and fence lines, and the post usually gets the worst of it. A sagging hinge looks like an operator fault, but the real fix is resetting the post with a deeper concrete footing so the gate swings level again.
- Misaligned or missing safety photocells. We find older Broadview Park installations with photocells aimed at the wrong spot or disconnected entirely, leaving the entrapment protection untested. That’s a UL 325 violation and a real hazard, especially on gates that close fast.
- Remote interference from nearby lots. With homes packed close together along streets like SW 18th Street, a neighbor’s new garage opener or wireless camera can bleed onto your receiver’s frequency. We re-code remotes and, when needed, swap receivers to a cleaner channel.
Pricing for Electric Gate Repair in Broadview Park, FL
Most operator repairs in Broadview Park run $180 – $640 before parts, and we give you the full number in writing before any work starts. A control board replacement on a LiftMaster or Ghost Controls swing gate usually lands between $280 and $520. A complete operator replacement, which is often the smarter fix when the old unit has been flooded more than once, runs $950 – $1,900 for residential gates. Keypad and remote issues are typically the cheapest at $95 – $260. What moves the price: gate weight, post condition, whether wiring needs to be re-run, and the brand of opener. Call (903) 417-0793 for a free estimate and we’ll tell you the number on the phone, then confirm it in writing at the door.
We Also Serve Cities Near Broadview Park
Our Electric Gate Repair in Broadview Park routes also cover nearby South Florida communities. If you’re in Jacksonville, Miami, Tampa, or Orlando, our dispatch team coordinates local crews for each area with the same written pricing and 365-Day Done Right Promise. Call us from anywhere in the region and a live person picks up.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Broadview Park
A quick test: swing the gate manually with the operator disengaged. If it binds, scrapes, or drops on one side, the problem is structural, usually a settled hinge post, not the motor. If the gate swings freely but won’t move under power, the operator, limit switch, or control board is the likely culprit. We diagnose both during a standard visit, and a hinge post reset in Broadview Park typically runs $280 – $480 including concrete work. Call (903) 417-0793 and we’ll tell you what you’re actually dealing with.
Yes. Every automatic gate in Broadview Park is legally required to meet UL 325 entrapment standards, which means working photocells or edge sensors and a properly set reverse function. Older gates in this neighborhood often have missing or misaligned sensors, and that’s a safety and liability problem, not a cosmetic one. We test reversal force and sensor alignment on every repair and replacement.
The fix is usually to raise the operator onto a concrete pad and correct the drainage so water flows past instead of pooling under the unit. On a canal-front job off Riverland Road, we took a call on a LiftMaster swing gate that had stopped mid-travel; the operator box was half-submerged in a puddle from a blocked swale, and the control board was corroded. We reset the post footing, raised the operator, replaced the board, and re-aimed the safety photocell so the gate reversed cleanly before we left. The homeowner said it was the first time the gate had closed fully since the last named storm. Raising an operator onto a pad in Broadview Park runs $220 – $480 including materials, and it’s the single best way to stop the flood-corrode-replace cycle.
A standard operator swap on a residential swing gate takes about half a day, including removal, mounting, wiring, and safety testing. A full installation with new posts, power run, and access control usually takes one to two days on Broadview Park’s tight lots, because we’re often working around existing walls, fences, and drainage swales. We never promise same-day installation; we promise a real schedule and a written price before we start. Call (903) 417-0793 for a timeline on your specific setup.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, covering nearly every brand found on Broadview Park driveways and small commercial lots. We stock common parts locally for Ghost Controls, DoorKing, and Viking, which speeds up repairs that would otherwise wait on shipping. If your unit is discontinued, we’ll give you a straight answer on repair versus replacement.
Your gate is your first line of security on a street where every neighbor knows which house has the broken opener. Call Calder Gate Repair at (903) 417-0793 for a free estimate, a written price before any work starts, and a repair backed by the 365-Day Done Right Promise. A live person answers now.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Broadview Park and the surrounding South Florida area.