Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Edison
If your electric gate in Edison won’t open, stops halfway, or grinds through every cycle, here’s the short version: most gate repairs in Edison run between $180 and $450 before parts, and Calder Gate Repair can usually have a background-checked tech at your driveway within a 2-hour window, not an all-day “sometime between 8 and 6” block. We’re the dedicated gate repair team inside the Relay Home Co. family, and we know the gates, openers, and wiring quirks that show up across Edison’s streets, from Woodbridge Avenue to the Route 1 corridor. Call (903) 417-0793 and a live person answers, 24/7. No voicemail. No call center script. A real human who can book the visit, give you a written price before any work starts, and send a trackable arrival time to your phone.
Why Calder Gate Repair Is Edison’s Preferred Electric Gate Repair Company
Edison homeowners call us because we treat a gate opener problem the way they’d treat a car problem: explain what’s wrong, show you the part, quote the price in writing, and fix it right that day. We’re not a general handyman service squeezing gate calls in between deck builds. Gate repair is what we do. Our techs train specifically on nine gate opener brands, including FAAC, BFT, and Linear, so when a homeowner off Woodbridge Avenue calls about a swing gate that stopped reversing, we’re not googling the wiring diagram in the truck.
Every tech shows up in uniform, background-checked, and you get a live arrival link the moment the truck dispatches. That’s Relay Standard stuff. You’ll see who’s coming, when they’ll be on your street, and what the job costs before the first bolt turns. Edison is dense with driveways that need gated access that actually works, and we’ve built our reputation here one repair at a time.
Electric Gate Motor in Edison
An electric gate motor in Edison is the workhorse that swings or slides your gate open and closed. On older Menlo Park Terrace properties and homes along Route 27, those motors are often wired to long underground power runs, some stretching 150 feet or more from a garage subpanel. When the motor gets weak voltage over a long, undersized run, it starts to brown out mid-cycle, which looks and sounds like a dead motor but is frequently a feed problem. Our team checks the actual voltage at the motor terminals before recommending a replacement, because installing a new FAAC or LiftMaster on a bad feed just burns the new one out in a season. Basic motor repairs in Edison run $200 to $400, and full motor replacement with a new arm or slide assembly typically runs $650 to $1,400 depending on the opener model and gate weight.
New Motor Installations and Power Runs
When a gate motor is beyond repair or the homeowner wants a speed upgrade, we spec the motor to the actual power run. On a 1920s driveway off Route 27 with old wiring, we’ll recommend either a larger power feed or a hybrid solar-capable operator so the motor isn’t fighting its own supply. We don’t guess. We measure, then price it in writing.
Motor Diagnostics on Route 1 Corridor Homes
Newer Route 1 corridor subdivisions often have shorter power runs from a garage subpanel, which is good. The problem there is often salt and grit from winter-treated roads packing into slide gate tracks and motor gears. The motor sounds fine, the gate grinds. We clean the rack and pinion, check the motor’s current draw, and usually have it cycling clean without a new motor.
Gate Access Control in Edison
Gate access control in Edison covers the keypads, remotes, vehicle loop detectors, and intercom systems that tell the gate when to open. Most Edison homes with automatic gates have at least two of these, and when a keypad stops responding or a remote only works from three feet away, the issue is usually either a bad receiver board, a loop detector that’s lost its tuning, or a keypad with moisture inside the housing. We diagnose the actual component rather than throwing a new “universal” remote at the problem.
Keypad replacement in Edison runs $160 to $320. Remote programming or replacement runs $80 to $200 depending on brand and number of transmitters. Receiver board replacement runs $220 to $450. Loop detector replacement for a driveway vehicle loop runs $250 to $600 because it includes cutting and re-sealing the saw-cut in the concrete or asphalt.
Vehicle Loop Detectors and Safety Edges
Edison’s freeze-thaw winters are rough on loop saw-cuts. Water gets in, freezes, expands, and breaks the sealant. Then road salt from the Route 1 corridor migrates in and the loop starts false-triggering or stops detecting entirely. We cut out the old sealant, re-test the loop’s frequency, and re-seal the cut properly. A false-triggering loop on a slide gate is dangerous, so we don’t patch it and walk away.
Photoelectric Sensors and Reversal Systems
Every automatic gate in Edison should have working photo-eyes and a functioning entrapment reversal system to pass the UL 325 standard. If your gate reverses halfway open or refuses to close at all, the photo-eyes are usually misaligned, dirty, or one of them has a cracked lens. We realign, replace, and run the full reversal pressure test before we leave. That test is non-negotiable on every gate we touch.
Trusted Brands We Service in Edison
Calder Gate Repair techs are factory-familiar with nine major gate opener brands, so whether your Edison driveway has a FAAC hydraulic swing operator, a BFT slide operator, a Linear residential unit, or a Viking gate on a commercial property, we know the wiring, the boards, the common failure modes, and the replacement parts that fit. We keep a rolling stock of common FAAC, BFT, and Linear boards, limit switches, and photo-eyes within our service network, so many repairs don’t wait on a supplier shipment. That matters when your gate is stuck open in February and your dog has decided the open driveway is an invitation.
Common Electric Gate Repair Problems We See in Edison Homes
- Hinge post movement in clay-heavy soil. Edison’s soil has a lot of clay, and clay swells and shrinks with every season. A gate post that was plumb last fall can be leaning half an inch by spring, which sags the gate panel until it drags on the operator arm. Realigning the leaf without resetting the post footing is a temporary band-aid.
- Undersized underground power runs on older streets. Homes off Route 27 and in Menlo Park Terrace often run 14-gauge wire 150 feet to a detached gate. The operator voltage sags mid-cycle, the control board glitches, and the homeowner thinks the board is dead. We check voltage at the motor before condemning anything.
- Salt and grit in slide gate tracks. Route 1 corridor homes see heavy winter road treatment, and slide gates along those properties collect salt, sand, and grit in the rack and pinion. The operator stalls or grinds, and the motors wear prematurely if the track isn’t cleaned seasonally.
- Photo-eye failures from moisture and vibration. The safety eyes on Edison gates take a beating from freeze-thaw cycles and from operators that vibrate through every cycle. Lenses crack, seals fail, and the gate starts refusing to close or reversing at random. This is usually a $80 to $160 fix, not a new opener.
Pricing for Electric Gate Repair in Edison, NJ
Here’s what we actually charge in Edison. Diagnostic service call runs $85, and that’s credited toward the repair if you hire us. Small repairs (limit switch, photo-eye alignment, remote programming, keypad cleaning) run $120 to $250. Mid-range repairs (receiver board, keypad replacement, replacement safety sensor) run $220 to $450. Major repairs (motor replacement, full operator swap, control board replacement) run $650 to $1,400. You get a written price before any work starts, and the number on that quote is the number on the invoice. Period. Call (903) 417-0793 for a free estimate and we’ll walk you through the exact numbers for your gate.
We Also Serve Cities Near Edison
If you live just outside Edison, our Electric Gate Repair team covers the surrounding area too. We regularly run calls in Elizabeth, Newark, Bayonne, and Jersey City, often combining multiple stops to keep the diagnostic fee fair. If you’re within 30 minutes of Edison, call (903) 417-0793 and check. You can also see our full Electric Gate Repair in Edison coverage details here.
Serving Edison, NJ - Our Local Coverage Area
We’re based in the Edison area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Edison
Your gate’s safety system is detecting something. In most cases the photo-eyes are misaligned or one of them is chirping because of a cracked lens, a loose wire, or a dusty reflector. On Edison properties with older underground runs, the voltage sag can also cause the control board to reset mid-cycle, which looks similar. We diagnose it by testing the photo-eye signal and the voltage at the board. Call (903) 417-0793 for a diagnostic visit, and we’ll tell you exactly which part failed before you spend anything on a repair.
Yes. Even a fully fenced Edison property with an automatic gate is required to have a working entrapment protection system under the UL 325 standard, which New Jersey enforces through local permitting and inspection. Photo-eyes (also called non-contact sensors) detect a child, pet, or object in the gate’s path and stop or reverse the gate. Your fencing doesn’t change that requirement. We install, align, and test photo-eyes on every gate repair or installation we do in Edison, and we’ll verify yours pass before we leave.
No, a full electric gate installation is a measured and scheduled job, not a same-day repair. A typical single swing gate with a new operator, concrete post footings, a power run, safety edges, and photo-eyes takes two to four days on an Edison property. The post footings need to set before the operator goes on, and the power run and control wiring need to be run and tested without being rushed. We provide a free measure and a written price before anything is ordered, so you know the timeline and the cost up front. Call (903) 417-0793 to book a measure.
Our techs train on nine major brands, including FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you live in Edison and your gate has a FAAC hydraulic swing operator or a BFT slide operator, we likely have the board or the limit switch in stock or can source it fast. We don’t “kind of know” a brand. We know the wiring diagrams and the failure patterns for each.
Usually it’s salt, grit, and small stones packed into the rack and pinion or the gate track. In Edison, road treatment from Route 1 and nearby thoroughfares migrates into slide gate tracks all winter, and the grit acts like sandpaper on the gears. The motor sounds normal because the motor is fine. The gate is physically binding. We clean the track, inspect the rack for worn teeth, re-lube the pinion, and set the limits. If the rack itself is chewed up, we’ll quote the replacement before touching it.
Call Calder Gate Repair for Electric Gate Repair in Edison
If you live in Edison and your gate isn’t doing what it should, call (903) 417-0793. A live person answers, day or night, and you’ll get a straight answer about what’s going on, a written price before any work starts, and a trackable arrival time so you’re not waiting around. Every repair comes with our 365-Day Done Right Promise: if it fails within the year, we come back free. Calder Gate Repair is part of the Relay Home Co. family, established 2009. We’re the gate team, and gates are what we do.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Edison, NJ.