Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Grapevine
An electric gate that won’t open, reverses mid-cycle, or grinds to a halt is more than an inconvenience. It’s a security gap and a daily frustration. Calder Gate Repair fixes electric gates across Grapevine, TX, from swing gates sagging on original 1970s hinge posts in older neighborhoods to slide gate operators on newer HOA entrances. Most Grapevine repairs run $180 – $340 for labor before parts, and we give you a written price before any work starts. If your gate is acting up, call (903) 417-0793. A live person answers 24/7.
Why Calder Gate Repair Is Grapevine’s Preferred Electric Gate Repair Company
Grapevine isn’t one housing market. It’s a patchwork. Pre-1980s single-family streets near Main Street sit next to newer gated developments with fully automated slide gates. That means gate repair here isn’t a one-size-fits-all job, and our technicians know the difference. We’re factory-familiar with nine major opener brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we don’t have to “figure out” your system. We already know it.
Every Calder technician arrives in uniform, background-checked, with a live, trackable arrival time sent to your phone. No four-hour windows. No voicemail tag. You see who’s coming and exactly when.
We stand behind the work with the 365-Day Done Right Promise: every repair carries a written guarantee, and if the repair fails within 365 days, we come back at no charge. That’s not a marketing line. It’s written on every invoice.
Led by Nico Alvarez, Calder Gate Repair is the dedicated gate repair specialist inside the Relay Home Co. family, which has been operating since 2009. Dispatch for Grapevine is coordinated from the brand’s Dallas-Fort Worth office, and crews serve Grapevine locally.
Automatic Gate Repair in Grapevine
Automatic Gate Repair in Grapevine covers everything that makes a powered gate move safely: the opener motor, control board, remote receivers, keypads, safety photocells, edge sensors, and the mechanical gate itself. When one part fails, the whole system often behaves erratically. Gates reverse before closing, open but won’t close, or refuse to respond to remotes. Homeowners call us when the gate has become unreliable enough to threaten daily routines or property security.
Typical automatic gate repair in Grapevine runs $180 – $340 for labor, with parts billed at cost. A control board replacement on a Viking or DoorKing opener usually lands between $350 and $750 total depending on the model. Keypad replacement is typically $120 – $250, and safety sensor alignment or replacement runs $100 – $200.
Swing Gate Repair
Swing gates are common throughout older Grapevine neighborhoods like the Heritage area and along Northgate Drive. The most frequent failure we see is a gate that sags at the hinge, causing the operator to bind and reverse under load. We can often correct sag without replacing the gate by re-setting post footings and installing reinforcement plates.
Slide Gate Operator Service
Slide gates on HOA entrances and larger properties near Grapevine Mills rely on rack and pinion gears and wheel assemblies. North Texas clay soil expands and contracts with moisture, which shifts gate track alignment over time. We realign tracks, replace worn gears, and test the operator’s force limits so the gate doesn’t stall mid-cycle.
Electric Gate Motor in Grapevine
An Electric Gate Motor is the muscle behind the gate. In Grapevine, motors fail for several reasons: years of exposure to North Texas heat, strained operation from a sagging gate, lightning strikes on ungrounded circuits, or simply age. When the motor goes, the gate may hum without moving, move a few inches and stop, or operate only manually.
Motor replacement in Grapevine typically runs $450 – $950 installed depending on whether you’re replacing a swing arm opener like a LiftMaster LA500 or a slide gate motor like a BFT Deimos or FAAC 844. The labor is usually included in that range, and we quote the exact number before ordering a single part.
Motor Replacement With Existing Gate
If your gate itself is solid, motor replacement is the smart fix. We remove the old operator, install the new one, wire it properly, and program travel limits and force settings. The gate gets tested for obstruction reversal and entrapment protection per UL 325 before we leave.
Motor Repair vs. Replacement
Not every motor failure requires a full replacement. Capacitor failures, limit switch faults, and gear damage can often be repaired for $150 – $300. The limit switch, by the way, is the small sensor that tells the gate when to stop. When it fails, the gate may slam against the stop or refuse to open fully. We diagnose before recommending replacement, so you’re never paying for a new motor when a $40 part fixes it.
Trusted Brands We Service in Grapevine
We’re factory-familiar with the brands Grapevine homeowners and HOAs actually use. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That’s not a list we memorized. It’s systems we’ve opened, repaired, and rewired hundreds of times. For Grapevine customers, that means faster diagnosis, the right parts, and less guesswork billing. We often stock common Viking and Ghost Controls control boards and sensors for swing applications, so residents in neighborhoods like Kimball Oaks and West Park don’t wait days for a part to ship.
Need Electric Gate Repair help from a team that knows your exact opener? Call us at (903) 417-0793.
Common Electric Gate Repair Problems We See in Grapevine Homes
- Sagging swing gates that bind and strain the operator. The flat but clay-heavy soils under Grapevine’s older neighborhoods, especially in areas like Heritage and Stonegate, shift over decades. Loose hinge posts and deteriorated footings cause the gate to settle, and the motor works harder every cycle until it overheat-trips or reverses mid-close.
- Slide gates stalling from worn rack and pinion gears. Gates on gravel, dirt, or uneven driveways near Lake Grapevine see more debris and fine dust. That grit chews through gears faster. Property owners notice the gate grinding or jumping before it stops moving entirely.
- Safety photocells and loop detectors malfunctioning after storms or insect nesting. Texas storm season brings rain, wind, and debris. Photocells get knocked out of alignment, and mud daubers build nests inside sensor housings. The result is a gate that reverses for no visible reason, which is the gate’s UL 325 entrapment protection doing its job poorly due to a bad sensor.
- Control board corrosion and power surges. Grapevine’s summer thunderstorms produce frequent lightning. Unprotected boards in DoorKing, Elite, and Viking openers take hits and fail. A surge protector is a cheap retrofit we recommend on almost every Grapevine repair call.
Pricing for Electric Gate Repair in Grapevine, TX
Here’s what Grapevine homeowners should expect to pay. Most diagnostic visits are $75 – $125, and that amount rolls into the repair if you proceed. Labor for typical repairs: $180 – $340. Common part costs run from $40 for a limit switch to $750+ for a control board on higher-end Viking or DoorKing systems. Motor replacement: $450 – $950 installed. Keypads and remote programming: $85 – $180. Safety photocell replacement: $100 – $200.
What affects the price? The gate type (slide gates are almost always more expensive than swing gates), the opener brand, the age of the wiring, and how much of the existing hardware is reusable. We write the number down before any work starts. The invoice matches the quote. That’s our standard, and it doesn’t change because it’s 4:00 PM on a Friday or because the gate is a Viking instead of a Ghost Controls.
We also serve Grapevine and surrounding areas with the same upfront pricing and guarantees on every visit.
We Also Serve Cities Near Grapevine
Calder Gate Repair serves Grapevine and the surrounding DFW suburbs. We regularly dispatch to Southlake, Colleyville, Euless, and Coppell. Same pricing, same written quote before we touch a bolt, same 365-Day Done Right Promise, wherever your gate is.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Grapevine
In most Grapevine cases, the gate reverses because a safety photocell is misaligned, dirty, or has a wasp nest inside the housing, or because the gate itself is sagging and tripping the opener’s obstruction sensor force settings. North Texas heat and storms make both problems more frequent here. We fix it by testing each safety input in sequence, which takes about an hour on most single-family gates. Call (903) 417-0793 and tell us whether it reverses during opening, closing, or both. That detail narrows the diagnosis fast.
We repair all nine major brands you’ll find across Grapevine: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate uses a different brand, call anyway. Many systems share parts, and our techs have seen most imports that end up in Texas backyards. We carry common Viking, Ghost Controls, and DoorKing parts in our local DFW service vehicles, which speeds up repairs across Grapevine and nearby zip codes 76051, 76092, and 76099.
A complete electric gate installation in Grapevine typically takes 1 to 3 days depending on ground conditions, gate size, and whether we need to pour concrete pads for the operator and concrete for the gate posts. We quote a timeline and a total price before starting, and we never promise same-day installation. The schedule accounts for post-setting, power run, and safety testing. The number is in writing, and the work isn’t done until the gate reverses safely on obstruction force, photocell, and edge sensor tests.
Yes, and we do it regularly in older Grapevine neighborhoods like Heritage and Kimball Oaks where original wood or steel swing gates have pulled loose from their hinge posts. We re-set post footings, add steel reinforcement plates when needed, and realign the hinges. The cost runs $250 – $600 for a typical single swing gate sag correction, less than a full gate replacement. Once the gate moves freely, the motor stops straining and often lasts years longer. Call (903) 417-0793 for a site visit and a fixed price.
We do. Solar is a solid option for Grapevine properties where running AC power to the gate would mean trenching across a long driveway or disturbing mature landscaping. We install solar-compatible operators from Viking, Ghost Controls, and Mighty Mule, size the panel to the opener’s standby draw, and configure the controller to avoid killing the battery in cloudy stretches. Solar installations in Grapevine typically run $900 – $1,800 for a single swing gate with panel, battery, and operator. Estimates are free, and the price is in writing before we order equipment.
What Sets Calder Gate Repair Apart
Here’s the short version of what you get when you call: a live person answering the phone no matter the hour, a trackable arrival time like a rideshare, a background-checked technician in uniform, a written price before work starts, before-and-after photos of the work, and a digital invoice you pay from a link. We call that The Relay Standard, and every job in Grapevine runs on it.
We recently repaired an automatic swing gate in the Grapevine Heritage area where the gate had sagged badly at the hinge post, causing the operator to strain and reverse randomly. After re-setting the post footing and performing sag correction, we installed a new LiftMaster operator and confirmed the safety photocells and edge sensors were working per UL 325. The gate now cycles smoothly, and the homeowner has reliable keypad entry.
If your gate is misbehaving, sagging, or dead, call Calder Gate Repair at (903) 417-0793 for a free estimate. The repair starts with an honest look and a written number. That’s the only way we do it in Grapevine.
Written by Nico Alvarez, Owner at Calder Gate Repair, the dedicated gate repair specialist inside the Relay Home Co. family serving Grapevine and the Dallas-Fort Worth metro.