Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Irving
Electric gate repair in Irving typically runs $180 – $480 for most opener and control board issues, and we can usually get a technician to your driveway the same day you call. Calder Gate Repair is the dedicated gate specialist inside the Relay Home Co. family, and we’ve spent years working on the specific failure patterns Irving homeowners deal with: hail-cracked operator housings, clay-soil post shifts, and UV-baked control boards. If your gate is stuck, creeping, or refusing to close, call (903) 417-0793 and a live person answers, 24/7. You’ll get a trackable arrival time and a written price before any work begins.
Why Calder Gate Repair Is Irving’s Preferred Electric Gate Repair Company
Irving homeowners call us because we show up with a real arrival time, not a vague four-hour window. Every technician is background-checked, uniformed, and dispatched from our Dallas-Fort Worth office with a live ETA you can track from your phone. No phone tag. No waiting around wondering if anyone is coming.
We’re factory-familiar with nine major gate opener brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we diagnose the actual fault instead of guessing, and we usually carry the part on the truck. Nico Alvarez, who leads our gate repair team, insists on one standard: the written price you approve at the door is the exact number on the invoice. Every repair also carries the 365-Day Done Right Promise, and if the repair fails within that window, we return at no charge.
Irving’s housing mix, from the 1960s ranches near Heritage District to newer gated custom homes along MacArthur, means we see every opener type ever installed in the DFW metro. That local repetition means faster diagnoses and fewer repeat visits.
Gate Access Control in Irving
Gate Access Control in Irving covers the keypads, card readers, remotes, and intercom systems that let authorized people through while keeping everyone else out. When an Irving homeowner’s keypad stops responding or a remote works only from three feet away, we test the receiver, the keypad wiring, and the control board to find which component actually failed, then replace only what is necessary. On most access control jobs in Irving, keypad replacement runs $140 – $260, remote programming runs $60 – $120 per remote, and a full receiver replacement lands between $220 – $380 before parts. Every price is written down before we touch a single wire.
Keypad and Intercom Troubleshooting
Older Irving homes with hardwired keypads often have corroded wire splices from years of North Texas heat and rain cycling. We trace the wiring, check voltage at the keypad, and confirm the relay is firing on the opener’s control board. What looks like a dead keypad is frequently a $40 splice repair, not a $200 keypad replacement.
Receiver and Remote Replacement
If your remote works at two feet but not twenty, the issue is usually the receiver or antenna placement. On Viking and DoorKing systems common in Irving, a cheap antenna relocation fixes range problems without any new parts. When a receiver does fail, we match frequency and compatibility so all your existing remotes keep working.
Commercial Gate Operator in Irving
Commercial Gate Operator service in Irving handles the heavier slide and swing operators on apartment complexes, office parks, industrial buildings, and mixed-use projects along corridors like Belt Line Road and Freeport Parkway. These operators run hundreds of cycles a day, and at about 3,000 cycles a slide gate mechanism wears through its rack or the gearbox starts slipping. Common commercial operator repairs in Irving run $450 – $900 for gearbox and motor work, while replacement operator systems run $1,800 – $4,200 installed. For accessibility and code compliance issues with safety edges or photo eyes, repairs typically run $250 – $500.
Automatic Gate Opener Repair
Whenever we show up to an Irving commercial property with a gate that creeps or reverses mid-travel, we inspect the whole system rather than treating the opener as the automatic suspect. Loop detectors buried under the asphalt go bad often in Irving’s clay-heavy soil, where shifting ground stresses the loop wires. We test the detector, the safety edges, the rack and pinion, and the motor draw before deciding what actually needs replacing.
Slide and swing operator maintenance
We offer preventive maintenance for Irving commercial properties: greasing racks, testing the reversing sensors, checking gate hardware after hail or hard winds, and load-testing motors. A neglected gate that slams into its end stops will destroy both the operator and the gate. We’d rather fix the three-dollar grease issue now than the three-thousand-dollar operator later.
Trusted Brands We Service in Irving
We stock parts in our Dallas-Fort Worth office for the brands Irving homeowners and property managers depend on: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Irving homes with a Viking or Ghost Controls opener, we can usually complete a swap the same visit. If you own a DoorKing or Elite setup, our techs know the dip switch and programming paths by heart, so you are not paying for a factory manual to be read on your driveway. We also keep the small failure items in stock, like limit switches, capacitors, and photocell pairs, so we are not waiting on a distributor in Fort Worth while your gate stays open all night.
Common Electric Gate Repair Problems We See in Irving Homes
- Hail-cracked or UV-baked operator housings. Irving sits in the DFW hail alley, and the same storms that dent car hoods crack the ABS plastic enclosures on LiftMaster and DoorKing control boards mounted without shade. A water-infiltrated board causes intermittent faults that look like a remote problem. Replacing the board without adding a sun- and hail-rated enclosure is a guaranteed repeat call.
- Sagging swing gates with shifted hinge posts. North Texas clay soil expands and contracts with moisture, and we regularly see single swing gates dragging on the ground where the post has actually moved. Replacing the operator without addressing the footing in clay soil means the next rain cycle undoes the work.
- Slide gates that creep or reverse mid-travel. Rack and pinion wear combined with loop detector failures leaves a slide gate stopping halfway or reversing without warning. Homeowners blame the opener, but the buried loop under the driveway apron is usually the culprit. We test both before recommending any replacement.
- Photocell and safety sensor failures. On older Irving gates, the photo eyes mounted on fence posts take direct afternoon sun and fail from heat plus vibration. Creeping open, refusing to close, or intermittent reversal are the classic signs, and the fix is usually a new photocell pair, not a new control board.
Pricing for Electric Gate Repair in Irving, TX
Here is what Irving homeowners can expect to pay, in real numbers, before parts:
- Gate motor or opener replacement: $425 – $750 installed
- Control board replacement: $180 – $420 installed
- Photocell or sensor replacement: $100 – $220 installed
- Keypad or receiver replacement: $140 – $280 installed
- Rack and pinion or hinge repair: $225 – $480 installed
- Full residential gate installation: $2,800 – $6,500 (measured, scheduled, never same-day)
Every number above is a range, and the written quote you approve before we start is the ceiling, never the floor. Parts are priced separately and shown on the same written quote. Call (903) 417-0793 for a free estimate, and ask about the 365-Day Done Right Promise: if the repair fails within a year, Calder Gate Repair returns at no charge.
We Also Serve Cities Near Irving
Our Electric Gate Repair team serves Irving plus the surrounding DFW communities of Dallas, Balch Springs, Hutchins, and Mesquite. If you’re in one of those cities, the same written pricing and 365-Day Done Right Promise applies. Visit our Electric Gate Repair in Irving page or call (903) 417-0793 to confirm next available arrival times in your neighborhood.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Irving
In the afternoon, when the Texas sun hits the photo eye at a low angle, sunlight can blind a sensor and trigger a false obstruction reading, which makes the gate reverse. The fix is usually a new photocell pair or a simple hood to shade the eye. On a job near the old downtown Irving core, our tech traced an intermittent slide gate to a failed safety photocell on a LiftMaster operator. The gate would run 8 inches and stop whenever the sun hit the eye. We replaced the photocell pair, load-tested the loop detector buried under the drive approach, and confirmed the reversal edge tripped on contact before calling it done; the rack and pinion got a grease pass while we were in there. That visit cost the homeowner less than $200. Call (903) 417-0793 and we’ll diagnose yours the same way.
In most Irving yards, the real problem is the hinge post shifting in the North Texas clay, not the operator failing. When the post leans, the gate sags and drags, which forces the motor to work harder until it burns out. We inspect whether the post needs re-setting in concrete. If the operator is still good, you save the cost of a replacement. If the post is stable and the gate is still dragging, it is likely hinge wear or a bent panel. Most hinge post resets plus operator re-tuning run $400 – $900. Call (903) 417-0793 for a written quote before anything starts.
A full residential electric gate installation in Irving takes 2 – 4 days once equipment arrives: site grading, concrete footings for posts, power run, operator mounting, arm or rack installation, safety edge and photocell wiring, and final reversal testing. We never promise same-day on an installation because concrete needs curing time and the power run must be done properly, not rushed. We provide a written schedule and a written price at the measure.
We stock local parts in our Dallas-Fort Worth office for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Irving homeowners with LiftMaster or Viking, board swaps are usually same-visit. For DoorKing and Elite, we carry common board, limit switch, and capacitor parts. If it is an uncommon part, we quote the exact lead time before you commit to anything.
We work on both, including commercial slide gates, barrier arm operators, and keypad or card access systems across Irving office parks and apartment communities. Our techs test the loop detectors, safety edges, gearboxes, and control wiring, then provide a written commercial repair quote. Call (903) 417-0793 and ask for the Electric Gate Repair team to schedule a site inspection.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Irving and the DFW metro.