Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Jacksonville
Most electric gate repairs in Jacksonville run between $180 and $450 before parts, and we typically get a technician to your property within 48 hours, often sooner. Calder Gate Repair specializes in getting swing gates, slide gates, and gate openers working again across Jacksonville’s neighborhoods, from Mandarin to Riverside to the beaches. If your gate is stuck open, half-closed, or refusing to respond to the remote, call us at (903) 417-0793 and we’ll give you a straight answer on cost before we ever send a truck.
Jacksonville homeowners deal with a specific set of gate problems that folks in Orlando or Tampa don’t face: sandy soils that shift posts after heavy rain, salt air corroding circuit boards near the coast, and humidity that gets into limit switches and refuses to leave. We know these failure patterns because we see them every week across Duval County. That local experience means we diagnose faster and fix it right the first time instead of guessing.
Why Calder Gate Repair Is Jacksonville’s Preferred Electric Gate Repair Company
Jacksonville homeowners call us because we do three things most gate companies won’t. First, every customer gets a written price before any work starts. The number you approve at the door is the number on the invoice. Period. Second, every repair carries our 365-Day Done Right Promise: if the repair fails within a year, we come back at no charge. Third, a live person answers our phone 24/7, not a voicemail, not a chatbot. You call, a human picks up, and you get a real arrival time you can track.
Owner Nico Alvarez built Calder Gate Repair inside the Relay Home Co. family, established in 2009, with one rule: treat every gate like it’s the customer’s front door, not a line item. Our technicians are background-checked, uniformed, and factory-familiar with nine major opener brands. When you book with us, you get live arrival tracking, before-and-after photos, and a digital invoice you can pay from your phone. No phone tag, no vague four-hour windows.
For Jacksonville specifically, we keep our dispatch coverage tight so response times stay predictable. Our crews serve the city from a local Jacksonville office, which means a technician headed to your place in Ortega or San Marco isn’t fighting traffic from another county.
Gate Access Control in Jacksonville
Gate access control in Jacksonville covers everything that tells your gate who to let in and who to keep out: keypads, remotes, intercom systems, vehicle sensors, and the control board that ties it all together. When a Jacksonville homeowner calls us about access control, it’s usually because a keypad stopped accepting the code, a remote only works from three feet away, or the gate opens for every car that pulls up but not for the one car that actually lives there.
Access control work in Jacksonville typically runs $150 to $500 depending on what’s failing. A keypad replacement with wiring might run $180 to $320. A new receiver board that talks to your remotes lands between $200 and $400. If you want to add or replace a full intercom setup at the property line, expect $450 to $900 with installation. We quote the whole job in writing before touching a screwdriver.
Keypad and Remote Programming
Most keypad failures in Jacksonville aren’t the keypad itself. It’s corrosion on the wiring terminals or a receiver board that’s gone flaky from humidity. We test the whole chain before recommending a replacement, so you don’t buy a $200 keypad when a $40 wiring repair fixes the problem.
Remote range issues are common in Jacksonville neighborhoods with lots of overhead power lines or dense tree cover. We can usually boost range or reprogram frequency without replacing the entire opener.
Commercial Gate Operator in Jacksonville
A commercial gate operator in Jacksonville is the workhorse motor and arm assembly that opens and closes heavy gates at apartment complexes, office parks, warehouses, and gated communities across the city. In Jacksonville, these operators run hard: daily cycling, salt air near the Intracoastal, and long runs of gate track that get clogged with sand and debris after storms. When a commercial operator fails, residents can’t get in, deliveries back up on the street, and property managers start getting angry calls.
Commercial gate operator repair in Jacksonville typically runs $350 to $1,200 depending on the operator type and what’s failed. A limit switch replacement, the small sensor that tells the gate when to stop, often lands between $200 and $400 on commercial units. A failed motor on a slide gate operator can run $600 to $1,100. We carry parts for FAAC, BFT, and Viking commercial operators, which covers most of what’s installed across Jacksonville’s multifamily properties.
Slide Gate Track Repair
Slide gates in Jacksonville derail more than they should because sand and shell debris get into the track and the rollers wear unevenly. We clean, realign, and replace rollers before they chew up the track itself. A track replacement runs $300 to $700 on most commercial gates.
Safety Edge and Loop Detector Service
Commercial gates in Jacksonville must pass UL 325 entrapment protection requirements, which means working safety edges and functioning loop detectors under the pavement. We test both during every commercial service call. A failing loop detector is the most common reason a commercial gate stops opening for cars automatically.
Trusted Brands We Service in Jacksonville
We repair every major gate opener brand installed in Jacksonville, with factory-familiar training on nine lines including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. FAAC and BFT units are especially common in Jacksonville’s older gated communities, and we stock the parts for them locally so you’re not waiting a week on a distributor. Linear and Viking show up frequently on commercial properties along Philips Highway and the Southside. Whatever brand you’ve got, our technicians know the failure points without reading the manual at your gate.
Common Electric Gate Repair Problems We See in Jacksonville Homes
- Gate sags and binds after heavy rain. Jacksonville’s sandy, high-water-table soil shifts when it saturates, and hinge posts that were poured shallow start to lean. A swing gate that dragged the ground after last week’s storm is usually a post problem, not a motor problem. We reset posts in concrete with deeper footings designed for our soil conditions.
- Control board corrosion near the coast. Salt air in Jacksonville Beach and Atlantic Beach gets into circuit boards and eats connections. We see boards with green fuzz on the terminals that still power up but won’t communicate with remotes. Replacing the board before it shorts completely costs less than waiting for total failure.
- Safety photocell misalignment. Ground settling from Jacksonville’s soil types shifts the photocells that sit on opposite sides of the gate opening. When one moves a half-inch, the gate refuses to close or reverses halfway for no reason you can see. This is an alignment fix, not a replacement, most of the time.
- Remote works, but only from the driveway. Jacksonville’s humid air degrades antenna connections and receiver boards slowly. Your remote still transmits, but the receiver’s hearing is fading. In most cases we replace the receiver board, which runs $150 to $300, and your remotes work from the street again.
In Jacksonville’s Mandarin neighborhood, our tech repaired a LiftMaster swing gate operator that had stopped reversing due to a misaligned safety photocell; we also corrected a sagging hinge post by resetting it in concrete. The gate now cycles smoothly with proper entrapment protection. That call started as a “motor won’t run” complaint and ended up being two separate issues working together, the kind of thing you only catch after you’ve seen Jacksonville soil do this to enough gates.
Pricing for Electric Gate Repair in Jacksonville, FL
Here’s what you can expect for common electric gate repairs in Jacksonville: gate motor repair runs $200 to $450, gate opener repair $150 to $350, keypad repair $120 to $250, remote control repair $75 to $150, safety sensor repair $120 to $220, and control board replacement $200 to $400. Parts are additional when needed, and we quote them upfront before ordering. Factors that affect cost include the gate’s size and weight, whether the operator is buried or surface-mounted, and whether corroded wiring needs to be pulled and replaced. Every estimate is free, written, and locked in before work starts. Call (903) 417-0793 and we’ll tell you what your specific repair should cost.
We Also Serve Cities Near Jacksonville
Our electric gate repair service covers Jacksonville and the surrounding area consistently, including Orange Park, Fleming Island, Middleburg, and Atlantic Beach. If you’re in one of those cities or anywhere nearby, call Electric Gate Repair and we’ll get you scheduled. For details on our coverage, see Electric Gate Repair in Jacksonville.
Serving Jacksonville, FL - Our Local Coverage Area
We’re based in the Jacksonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Jacksonville
Jacksonville’s heavy rain saturates the sandy soil and causes gate posts to shift, which makes swing gates sag and bind against the ground, tripping the opener’s safety system. It also gets water into corroded junction boxes and control boards, especially in coastal neighborhoods like Jacksonville Beach and Atlantic Beach. The fix is usually post stabilization and sealing or replacing moisture-damaged wiring. Call (903) 417-0793 for an exact diagnosis, and we’ll quote the repair before leaving the driveway.
Test the safety reversal at least once a month, and more often during Jacksonville’s rainy season when ground shifting can knock photocells out of alignment. Place a small object like a traffic cone in the gate’s path and close it: the gate should reverse immediately on contact. If it doesn’t, the entrapment protection is out of compliance with UL 325 and needs service now. We inspect safety edges, photocells, and reversal force on every repair visit.
LiftMaster and FAAC dominate the residential market in Jacksonville, with BFT and Viking showing up frequently on commercial gates and older gated communities. We carry parts for all major brands locally, including Linear and Mighty Mule, so most repairs happen the same visit rather than waiting on a shipment.
Yes, most manual gates in Jacksonville can be converted to electric operation, but the job starts with an on-site measure and inspection, not a same-day quote over the phone. Conversion includes an operator sized to your gate’s weight, safety photocells and edges, a control board, and often a power run to the gate location. In Jacksonville’s soil, we also spec deeper post reinforcement because an automated gate cycles more and shifts the posts faster. Expect the project to run $1,200 to $3,500 depending on gate length and access. Call (903) 417-0793 to schedule a free measure with a written price.
Slide gates derail in Jacksonville because sand, shell debris, and storm runoff get into the track and wear the rollers unevenly, especially on properties with unpaved approaches. Once the rollers wear flat spots, the gate drifts off track under load. We clean the track, replace worn rollers, and realign the gate, typically $200 to $450 depending on how far it’s drifted. If the track itself is bent or corroded, replacement runs $300 to $700.
For any electric gate issue in Jacksonville, call Calder Gate Repair at (903) 417-0793. You’ll get a live person, a straight answer, and a written price before any work begins. Free estimates, 24/7 phone support, and a 365-day guarantee on every repair.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Jacksonville with honest pricing and guaranteed gate repairs as part of the Relay Home Co. family since 2009.