Electric Gate Repair in Keller - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Electric Gate Repair Across Keller

Electric gate repair in Keller usually runs $185 to $420 for most opener, keypad, and sensor jobs, and Calder Gate Repair can typically have a technician at your door the same day you call. We work throughout Keller, from the gated sections off Bear Creek Parkway to the newer enclaves west of Rufe Snow Drive, and we quote every job in writing before turning a single bolt. If your gate won’t open, reverses mid-cycle, or the keypad stopped responding, call (903) 417-0793 and you’ll get a live person, not a voicemail.

Call (903) 417-0793

Why Calder Gate Repair Is Keller’s Preferred Electric Gate Repair Company

Keller homeowners put up with a lot from their gates before they finally call. The keypad works when it wants to. The gate groans through half an open cycle, then gives up. The remote works from the driveway but not the street. By the time we arrive, people usually just want to know two things: what’s actually wrong, and what it costs to fix. We answer both before the truck is unloaded.

Our Keller customers tell us the same thing again and again: they like that we show up when we say we will. Every technician is background-checked and in uniform, and you get a live, trackable arrival time on your phone, not a four-hour window. As part of the Electric Gate Repair team at Calder, we work on gate systems from FAAC, BFT, Linear, Viking, LiftMaster, and more, but more importantly, we diagnose based on what’s actually failing, not what brand name is on the lid.

Every repair we do in Keller is backed by the 365-Day Done Right Promise. Here’s what that means in plain words: if the repair fails within a year, Calder returns at no charge. It’s stated in writing on every job, along with a written price before any work starts. You won’t find an invoice number bigger than the number you agreed to at the door.

Gate Access Control in Keller

Gate access control in Keller means the system that decides who gets in and who doesn’t: keypads, intercoms, remote receivers, vehicle detectors, and the control board that ties it all together. When a Keller homeowner tells us the gate works fine for them but the delivery driver can’t get in, that’s an access control problem, not a gate motor problem. These jobs typically run $165 to $380 depending on whether we’re reprogramming a receiver, replacing a keypad, or rewiring a vehicle loop sensor, and we write the price down before we touch anything.

Keypad and Intercom Repairs

West-facing gate posts in Keller take direct Texas summer sun for six hours a day, and keypads mounted there fail faster than shaded ones. We replace worn keypad membranes, corroded contacts, and weather-sealed housings so the buttons actually respond on the first press, then reprogram codes on the spot and show you how to manage them yourself.

Vehicle Detection Loops

A gate that won’t open automatically when you pull up usually has a failed loop detector or a cut loop wire in the driveway. In Keller’s clay soil, loop wires also shift with ground movement over time. We test the detector output first, then either repair the splice or run a new loop in the saw-cut where the old one failed.

Commercial Gate Operator in Keller

A commercial gate operator in Keller is the heavy-duty motor and arm assembly that runs apartment complex gates, HOA entrances, and business lot gates off streets like Keller Parkway and Bourland Road. These units cycle dozens of times daily and wear out bearings, limit switches, and drive chains faster than a residential swing gate ever will. Commercial operator replacement in Keller typically runs $1,800 to $4,600 installed, and repair work on existing units usually lands between $320 and $850 before parts, depending on manufacturer and damage. We give a written quote for the full job before ordering anything.

HOA and Apartment Gate Service

When an HOA gate in Keller goes down, residents notice within the hour. We carry common replacement parts for LiftMaster, FAAC, BFT, and Linear commercial operators, which cuts turnaround time significantly compared to waiting on a distributor order. For communities with aging operators nearing end-of-life, we can do a full mechanical assessment and quote a replacement before the next failure strands residents outside.

Safety Reversal Testing

Every commercial gate we touch in Keller gets a full safety reversal test after the repair. That means we verify the gate reverses when it meets resistance, the photocells are aligned and wired correctly, and the warning signage is still mounted where it belongs. We don’t consider a gate done until those tests pass, which matters more than most people realize on a shared property.

Trusted Brands We Service in Keller

Our techs are factory-familiar with nine major gate opener brands, which means we walk onto a Keller job knowing the model’s failure points before we open the cover. FAAC swing operators, BFT slide operators, Linear keypads and receivers, Viking gate arms, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock a working inventory of common boards, arms, photocells, and keypads in our DFW service vehicles, so a Keller repair usually doesn’t stall out waiting on a part shipped from somewhere else. If you know what brand you have, tell us when you call, and we’ll bring the likely parts on the first trip.

Common Electric Gate Repair Problems We See in Keller Homes

Keller’s gate failures follow a pattern, and it’s tied to what’s under your driveway. Here’s what we see most often:

• Post movement from expansive clay soil. Keller sits on the same expansive clay formation that causes foundation movement across northeast Tarrant County. When the soil swells after rain and shrinks in drought, gate hinge posts shift. That throws off operator limit switches, so a swing gate reverses mid-cycle or stops six inches short. The fix is resetting or re-footing the post, not just reprogramming the operator. Adjusting only the operator gets a callback in a month when the clay moves again.
• Builder-grade operators reaching end-of-life together. Keller subdivisions built in the early 2000s installed entry gate operators in batches, which means whole neighborhoods now have original units failing within a few years of each other. Some of these models are discontinued, with no replacement parts stocked locally. We track which boards and arms are still available and can often retrofit a modern operator onto an existing post rather than tearing everything out.
• Solar-baked photocells on west-facing posts. Keller’s summer sun does real damage to safety sensors and keypad boards. The plastic housings warp, internal solder joints crack, and the photocell fails intermittently, which produces a no-open fault that disappears by the time a homeowner tests it again. We replace sensors with higher-temperature-rated units and mount them where they won’t get six hours of direct afternoon heat.
• Limit switch failures on swing arms. A limit switch is the small sensor that tells the gate when to stop. On a Keller gate with even slight post movement, the switch gets triggered early or late, and the gate behaves like it’s confused. Replacing the switch is straightforward, but if we don’t check the post and hinge alignment at the same time, the new switch fails the same way within months.

Pricing for Electric Gate Repair in Keller, TX

We Also Serve Cities Near Keller

If you’re right outside Keller city limits, we still cover you. Calder Gate Repair handles electric gate work in Haslet, North Richland Hills, Roanoke, and Southlake, with the same written pricing and 365-Day Done Right Promise. For a closer look at our Electric Gate Repair in Keller coverage area or to check availability in your neighborhood, give us a call.

FAQs About Electric Gate Repair in Keller