Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Lake Park
An electric gate that won’t open, won’t close, or grinds halfway and stops is more than annoying. It leaves your home exposed or traps you inside when you’re already late. Most gate opener repairs in Lake Park run $220 – $680 before parts, and our techs arrive ready to diagnose the problem the same day you call, often within hours. Calder Gate Repair has worked on gates from Lake Shore Drive to the neighborhoods west of US-1, and we know the salt air, sandy soil, and older swing gates that make Lake Park repairs different from work inland. Call (903) 417-0793 and a live person answers, 24/7.
Why Calder Gate Repair Is Lake Park’s Preferred Electric Gate Repair Company
Lake Park homeowners call us because we show up when we say we will, with a live arrival time you can track on your phone. No four-hour windows. No phone tag. Our technicians are background-checked, uniformed, and factory-trained on nine major opener brands, including the Viking, Ghost Controls, and DoorKing units we see most often on Lake Park properties. Nico Alvarez leads the team, and the standard he sets is simple: every job gets a written price before any work starts, and every repair carries our 365-Day Done Right Promise in writing. If the repair fails within 365 days, we return free of charge.
We’re part of the Relay Home Co. family, established in 2009, and each location operates independently under The Relay Visibility Guarantee. That means you get a digital invoice you pay from a link, before-and-after photos, and a paper trail that documents exactly what was diagnosed and what was fixed. Lake Park customers don’t want a vague promise. They want a gate that works and proof of what was done. That’s what we deliver.
Automatic Gate Repair in Lake Park
Automatic gate repair in Lake Park almost always starts with the same question: is the gate itself sound, or is the operator fighting a structural problem? On older Lake Park lots, especially along Lake Shore Drive and the intracoastal-adjacent streets, decorative swing gates installed decades ago sag at the hinge post. The operator mounts to that same post. When the post shifts, the motor binds, trips its overload, and the gate stops mid-cycle. Replacing the operator without fixing the post is a waste of your money. Our team checks both.
Hinge Post and Footing Inspection
A sagging gate in Lake Park rarely means a bent gate panel. It usually means the hinge post footing has loosened in sandy soil after years of afternoon thunderstorms. We reset the footing or reinforce the post, correct the gate’s swing plane, and only then evaluate the operator. The price for hinge post and footing correction typically runs $180 – $420, depending on the post size and the amount of reset work.
Swing Gate Operator Binding
When a swing gate operator binds against a shifting post, the motor pulls more current than it should. Over time, that burns out the capacitor or the limit switch, the small sensor that tells the gate when to stop. Replacing a limit switch or capacitor runs $120 – $260 in Lake Park. A full operator replacement, when the motor is beyond saving, runs $450 – $1,100 including installation.
Electric Gate Motor in Lake Park
An electric gate motor in Lake Park has a harder life than most people realize. Salt-laden air off the Intracoastal works its way into the operator housing and corrodes circuit boards and limit switches. A motor that ran fine for a year can start shorting at the control board after one humid summer on the east side of town. We open the housing, inspect the board for corrosion, test the motor’s amp draw, and tell you honestly whether the motor can be repaired or needs replacement.
Control Board Corrosion
Salt air corrosion on a control board doesn’t always kill the motor. Sometimes a corroded terminal or a failing relay on the board is the only problem. Board-level repair or replacement runs $180 – $450 in Lake Park, and it’s a common fix for gates that won’t respond to remotes or open randomly. We’ll test every input before quoting the job.
Motor Replacement vs. Repair
When the motor itself is seized or drawing triple its rated current, replacement is the honest call. A new motor for most residential gate operators in Lake Park runs $350 – $900 installed, depending on the brand and swing weight of the gate. We stock common Viking, Ghost Controls, and DoorKing replacement parts locally, which keeps turnaround fast for Lake Park customers.
Trusted Brands We Service in Lake Park
Our techs are factory-familiar with nine major gate opener brands, and on Lake Park jobs we most often service Viking, Ghost Controls, DoorKing, and Elite units. We carry local parts stock for these brands, which means fewer second trips and faster repairs. If you have a LiftMaster, FAAC, BFT, Linear, or Mighty Mule opener, we service those too. The brand on your motor matters less than the condition of the motor, the post it’s mounted to, and the safety sensors wired into it. We diagnose all of it.
Common Electric Gate Repair Problems We See in Lake Park Homes
- Salt-air corrosion on control boards and limit switches. Homes east of US-1 near the Intracoastal see more board failures than inland properties. The corrosion causes phantom open commands, dead remotes, or gates that stop responding entirely.
- Sagging swing gates on pre-1980s properties. Original decorative gates on Lake Shore Drive and nearby streets shift at the hinge post, not mid-panel. The operator binds against the moving post and trips the motor overload.
- Buried loop detector and keypad wire failures. Sandy soil and heavy afternoon thunderstorms undermine shallow wire runs. Re-terminating a loop detector or keypad wire typically runs $150 – $320 in Lake Park.
- Missing or non-compliant entrapment protection. Many older Lake Park gates were installed before UL 325 rules were standard. A gate that reverses on command but has non-functioning photocells or edge sensors is a safety liability, not a finished repair.
Pricing for Electric Gate Repair in Lake Park, FL
Here’s what Lake Park homeowners can expect, in writing, before any work starts:
| Repair Type | Typical Lake Park Range |
|---|---|
| Diagnostic visit (applied to repair) | $85 – $120 |
| Limit switch or capacitor replacement | $120 – $260 |
| Control board repair or replacement | $180 – $450 |
| Hinge post and footing reset | $180 – $420 |
| Safety photocell or edge sensor replacement | $140 – $340 |
| Full operator or motor replacement | $450 – $1,100 |
Every price is quoted and agreed before any work begins. The number on the invoice is the number we agreed to at the door. Estimates are free. Call (903) 417-0793 and we’ll walk you through what your gate actually needs, not what’s easiest to sell.
We Also Serve Cities Near Lake Park
Our Electric Gate Repair team covers Lake Park and the surrounding metro, including Jacksonville, Miami, Tampa, and Orlando. If you’re outside Lake Park, dispatch coordinates from our South Florida office. Same standards, same written pricing, same 365-Day Done Right Promise.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lake Park
An automatic gate that opens but won’t close is almost always a safety input problem, not a motor problem. The gate’s photocell or edge sensor is blocked, dirty from salt-air grime, misaligned, or failed. The operator is correctly refusing to close without a confirmed clear path. We’ll clean, realign, or replace the sensor, and the gate will close normally. Repairs for this issue typically run $140 – $340 in Lake Park. Call (903) 417-0793 for a free estimate.
In Lake Park, a sagging gate is usually the hinge post footing, not the gate panel or the operator. Sandy soil and summer rain loosen the footing, the post shifts, and the gate drops. The operator then binds against the misaligned post and starts tripping. We reset the footing, correct the swing plane, and test the operator under load. Post and footing work runs $180 – $420. Call (903) 417-0793 and we’ll tell you what’s actually moving.
Yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators across Lake Park. Our techs carry common parts for all nine brands and can diagnose most problems in one visit. The brand matters less than the condition of the motor and the integrity of its mounting post. Call (903) 417-0793 with your brand and symptom, and we’ll bring the right parts.
Most electric gate repairs in Lake Park take 1 to 3 hours on site, assuming the parts are common and the gate structure is sound. If the hinge post needs footing work or the operator needs replacing, the job may run longer or require a follow-up visit for concrete curing. We always quote the time and price before work starts. Call (903) 417-0793 for a diagnostic visit.
Yes. UL 325 entrapment protection is required on all automatic gate operators, including existing installations when the operator is serviced or replaced. Many older Lake Park gates on pre-1980s lots have operators installed before these rules were standard. If your photocells or edge sensors don’t reverse the gate under pressure, the gate is a liability. We include entrapment testing on every Electric Gate Repair call. Call (903) 417-0793 to schedule a safety check.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Lake Park through the Relay Home Co. family since 2009.