Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Lakewood
An electric gate that won’t open, won’t close, or reverses halfway through its cycle is more than a driveway annoyance in Lakewood. It’s a security gap and a daily source of frustration. A failed gate motor in a storm, a keypad that stopped responding, a safety sensor that keeps tripping: these are the calls we take from Lakewood homeowners every week. Calder Gate Repair fixes electric gates and gate openers across Lakewood, WA, and we do it with a written price before any work starts, a live arrival time you can track, and a guarantee we’re happy to put in writing. Call us at (903) 417-0793 and a real person answers, 24 hours a day.
What will this cost? Most electric gate motor repairs in Lakewood run $220 – $540 before parts. Keypad replacements typically land between $140 – $260. A full control board swap runs $280 – $520. Those are Lakewood numbers, not a national average. We’ll quote your exact price in writing before a single bolt is turned. No surprises at the door. That’s the Electric Gate Repair standard we bring to every job in this area.
Key takeaways:
- Most electric gate motor repairs in Lakewood: $220 – $540 before parts
- Keypads: $140 – $260 | Control boards: $280 – $520
- Written price before work starts, every time. No exceptions.
- 365-Day Done Right Promise: if the repair fails, we return free.
- Live, trackable arrival times. No vague four-hour windows.
Why Calder Gate Repair Is Lakewood’s Preferred Electric Gate Repair Company
Lakewood is not Seattle. The soils are different, the weather patterns are different, and the housing stock is predominantly mid-century. A gate operator that worked perfectly in a showroom will behave differently on a 1960s swing gate with settled hinge posts and original wiring. Our technicians know what a Lakewood gate failure looks like before they even arrive, because we’ve seen hundreds of them. We’re part of the Relay Home Co. family, established in 2009, and every Lakewood job is booked, tracked, and invoiced through the Relay Visibility Guarantee. You’ll know exactly who is coming, when they’ll arrive, and what the repair will cost before the work begins. That’s not marketing language. It’s how we run every Electric Gate Repair in Lakewood job.
The dispatch and scheduling for this area is coordinated from our Seattle office, but the crews serving Lakewood are local. They know the neighborhoods: the gate at the top of the hill off Steilacoom Boulevard, the iron driveway gates in Lake City West, the vinyl privacy gates in Oakbrook. They know which units corrode fastest in Lakewood’s wind-driven rain and which gate motors struggle with the inlet’s wet, glacially compacted soils. Led by Nico Alvarez, Calder Gate Repair has built its Lakewood reputation on showing up on time, diagnosing the problem in plain language, and fixing it right the first visit. If a repair fails within 365 days, we return at no charge. That’s our 365-Day Done Right Promise, and it applies to every repair we do in Lakewood.
How Much Does Electric Gate Repair Cost in Lakewood?
Straight numbers first. For a typical electric gate motor repair in Lakewood, expect $220 – $540 before parts. Keypad replacements run $140 – $260. Remote control replacements are $60 – $140. Safety sensor repairs (including the photocell beam and wiring) run $150 – $320. Control board replacements run $280 – $520. Full gate operator replacements, depending on brand and gate type, run $850 – $2,600 including labor. Every quote is written, itemized, and agreed upon before work starts. The price on the invoice is the price you approved at the door. We don’t do “estimates” that inflate mid-job. We do written quotes that hold.
And because the question comes up on nearly every Lakewood call: the quoted price covers everything we find. If we open the gate motor and discover a corroded limit switch or a stripped drive gear, we’ll stop, show you the issue, and give you a corrected number before proceeding. You’ll never see a surprise line item after the fact.
Call (903) 417-0793 for a free estimate. A live person answers, day or night.
Electric Gate Motor in Lakewood
Electric Gate Motor repair is the most common call we run in Lakewood, especially on older swing gates. A gate motor that hums but won’t move, grinds and stops, or reverses mid-cycle is usually telling you one of three things: the hinge post has settled and the gate is binding, the limit switch is out of adjustment, or the motor itself is failing. In Lakewood’s wet, glacially compacted soils, hinge-post settlement is the leading cause of motor strain. We see it constantly. We check the post and footing first, then the motor, then the controls. That sequence saves Lakewood homeowners from paying for a new motor when the real problem is a post that sank two inches.
What a Full Motor Replacement Includes
When a motor truly fails, we replace it, but we don’t just bolt on a new unit. We check the gate’s travel path, re-align the safety photocell beam, adjust the soft-stop, and run a full entrapment protection test. We also inspect the chain, belt, or rack and pinion for wear. If the gate binds anywhere in its travel, a new motor will fail the same way the old one did. That’s why we fix the binding first.
Motor Repair vs. Replacement Timing
Motor repairs in Lakewood typically take 1 – 3 hours on site. A full operator replacement, including groundworks if the post footing needs attention, is a scheduled job. We’ll give you a written price and a realistic date. We don’t promise same-day installation, and we’re honest about that from the first call. You get a free measure and a written quote instead.
Gate Access Control in Lakewood
Gate Access Control means the keypads, remotes, intercoms, and vehicle loop detectors that tell your gate when to open and for whom. In Lakewood, we get a lot of calls about keypads that stop responding after heavy rain, or remotes that work sporadically. Wind-driven rain off the Sound gets into keypad housings and corrodes contacts faster than you’d think. We replace worn keypads with weather-sealed units, reprogram remotes on the spot, and test loop detectors for the phantom triggering that happens when wiring insulation cracks in standing water. If your gate opens for no one or won’t open for anyone, access control is usually where the answer lives.
Keypad and Remote Replacement
A new keypad in Lakewood runs $140 – $260 installed. Remotes are $60 – $140. We program everything on site and walk you through the pairing process in plain language, then hand you a written record of the codes and settings.
Loop Detector and Intercom Repairs
Loop detectors fail quietly. Your gate starts reversing for no reason, or won’t open when a car pulls up. We test the loop with a multimeter, find the break, and re-splice the wiring in a waterproof junction box. If the intercom is the issue, we’ll test the line and the power supply before recommending replacement. These repairs run $200 – $420 depending on what’s involved.
Trusted Brands We Service in Lakewood
We service, repair, and replace gate operators from all major brands, and we’re factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Lakewood, we see a lot of Linear operators on older mid-century swing gates, a lot of Viking and DoorKing slide gates on larger properties, and Ghost Controls on newer DIY-installed systems. We stock common replacement parts for all of them locally, so most repairs don’t wait on a warehouse order. Brand knowledge matters when the difference between a wiring revision and a software quirk changes the repair price by $300.
Common Electric Gate Repair Problems We See in Lakewood Homes
- Hinge post settlement and gate sag. Lakewood’s glacially compacted, often saturated soils settle slowly. Swing gates sag, bind at the latch, and strain the motor until it burns out. We fix the post or the mounting, not just the motor.
- Phantom reversing from wet safety photocells. Wind-driven rain from the Puget Sound pushes moisture into sensor lenses and wiring. The gate thinks something is in the path and reverses. We replace the housings with sealed units and re-aim the beam.
- Worn rack and pinion gears on slide gates. Older slide gates on Lakewood properties strip gears under load, especially in winter when cold rain makes everything work harder. The gate binds, stalls, and the keypad entry stops responding.
- Keypad and intercom failures after heavy weather. Lakewood gets real rain, not drizzle. Keypads and intercoms mounted without enough weather protection fail first. We replace them with properly sealed units rated for this climate.
Pricing for Electric Gate Repair in Lakewood, WA
Here’s what Lakewood homeowners should expect to pay, with real ranges, before you call anyone:
| Service | Lakewood Price Range |
|---|---|
| Electric gate motor repair | $220 – $540 before parts |
| Keypad replacement | $140 – $260 |
| Remote control replacement | $60 – $140 |
| Safety sensor repair | $150 – $320 |
| Control board replacement | $280 – $520 |
| Full gate operator replacement | $850 – $2,600 including labor |
What changes the price? Gate weight, post condition, wire runs, and whether the access control system needs reprogramming. We’ll give you one written number after we see the gate, and that number does not move. Free estimates, no obligation. Call (903) 417-0793.
We Also Serve Cities Near Lakewood
If your property is close to the Lakewood line, we’re likely already in your neighborhood. Calder Gate Repair serves homeowners in Lakewood, Steilacoom, University Place, DuPont, and Spanaway with the same written pricing and 365-Day Done Right Promise. We schedule by the day, not by the week, and our crews know these streets like their own.
Serving Lakewood, WA - Our Local Coverage Area
We’re based in the Lakewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lakewood
In nine out of ten cases, it’s a safety photocell beam that’s dirty, misaligned, or shorting from moisture. Lakewood’s wind-driven rain gets into sensor housings and causes phantom reversing. The other common cause is a binding hinge post that triggers the obstruction sensor. We clean and re-aim the beam, then run a full entrapment test before we leave. If the post is the problem, we’ll show you the bind and give you a written price to correct it. Call (903) 417-0793 for a diagnosis.
We do install new electric gate operators and full gate systems in Lakewood, and we’re honest about the timeline. A straightforward operator swap on an existing gate takes a scheduled day. A full installation with new posts, groundworks, power run, and safety edges takes longer, and we plan it properly. We’ll give you a written price and a real start date, not a same-day promise we can’t keep. You get a free measure and a documented quote first.
We’re factory-familiar with nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your Lakewood gate was installed in the last 20 years, we almost certainly know the unit. That means faster diagnosis, a more accurate written quote, and fewer return trips.
Oiling the hinges doesn’t fix a settled post. Your hinge post has likely sunk into Lakewood’s wet, glacially compacted soil, and the entire gate is now out of square. That sag stalls the operator and burns out the motor over time. We dig out the old footing, reset or replace the post, and re-hang the gate square. Then we align the operator and test entrapment protection. It’s a real repair, not a lubrication job.
It depends on your gate’s position and the season. Lakewood gets long overcast stretches from November through March, and a solar panel’s output drops hard under cloud cover. A solar opener can work for a back gate or a low-use gate on a south-facing post, but for a primary driveway gate we usually recommend a hardwired power run. We’ll evaluate your site and give you a straight recommendation and a written price for both options.
Call Calder Gate Repair for Electric Gate Repair in Lakewood, WA
If your gate is acting up, you don’t have to wait through a four-hour window or play phone tag with a call center. We answer live, 24 hours a day, seven days a week. We’ll book a time, send you a trackable arrival link, and put a written price in front of you before any work begins. We’re the electric gate repair team Lakewood counts on because we show up, we fix it, and we guarantee it in writing. Call (903) 417-0793 for a free estimate. That call is the fastest way to get your gate working again.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family, serving Lakewood since our founding in 2009.