Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Palm Beach
Electric gate repair in Palm Beach runs $180 – $520 for most operator and hinge failures, and we typically reach homes between Royal Palm Way and the North End within 90 minutes of your call. If your swing gate is sagging, your keypad won’t respond, or your opener board keeps tripping, you want someone who knows how salt air on the barrier island eats through gate hardware fast. Calder Gate Repair handles all of it: motors, control boards, safety sensors, hinges, remotes, and keypads. Call (903) 417-0793 and a live person answers, day or night.
Why Calder Gate Repair Is Palm Beach’s Preferred Electric Gate Repair Company
We’re the gate repair arm of Relay Home Co., which has been operating since 2009, and our Palm Beach customers deal directly with Calder technicians, not subcontractors. Nico Alvarez, who leads the gate team, has spent years diagnosing operators on oceanfront and Intracoastal properties where standard inland repair logic simply doesn’t apply. The failure patterns here are different. A LiftMaster board that lasts 15 years in Wellington might die in six on South Ocean Boulevard if salt bridges form across the terminals.
Every job, including electric gate repair in Palm Beach, comes with three written guarantees: a price you approve before we touch a single bolt, a written repair warranty, and a free return visit within 365 days if the repair fails. That’s the Calder 365-Day Done Right Promise, and it’s printed on every invoice. Our techs arrive in uniform, background-checked, with a live trackable arrival time you can follow from your phone. No four-hour windows. No “we’ll call when we’re close.”
Gate Access Control in Palm Beach
Gate access control in Palm Beach often means more than fixing a keypad: it’s integrating the call box, the keypad, remote receivers, and sometimes a phone-based entry system so all of them work with the operator board. On the island, we frequently see systems where the keypad works but the telephone entry doesn’t, or the remote receiver picks up interference from nearby marina radio equipment. Most access control repairs in Palm Beach run $160 – $380, depending on whether we’re replacing a keypad, a receiver board, or rewiring the call box.
Keypad and remote issues
A dead keypad on a Palm Beach gate is usually corrosion inside the housing or a failed ribbon cable. We replace keypad units with sealed, weather-rated models and reflash the entry codes so the old ones stop working. Remote receivers get swapped and reprogrammed to eliminate interference from neighboring systems.
Telephone entry and call boxes
Many Palm Beach estates use call boxes that dial a house line or a cell phone when visitors press the button. Salt corrosion on the RJ11 terminals inside the box causes intermittent ringing or no connection at all. We clean, replace, and seal those connections, then test the full call-and-release cycle before we leave.
Commercial Gate Operator in Palm Beach
A commercial gate operator in Palm Beach has to handle more cycles per day and more salt exposure than a residential unit, which is why we stock heavier-duty operators and coastal-rated hardware for properties along Worth Avenue and the condominium corridors. When a commercial gate operator fails here, it’s rarely one thing: it’s a combination of corroded limit switches, worn capacitor contacts, and a control board that’s been fighting humidity for years. Commercial operator repairs in Palm Beach generally run $320 – $900 depending on whether we repair or replace the board and motor.
Operator motor and limit switch repair
The limit switch, which is the small sensor telling the gate when to stop, fails early in coastal conditions because the switch contacts oxidize. A gate that stops too soon or over-travels and slams is almost always the limit switch or a worn gear in the operator arm. We replace both with sealed components and set the travel limits so the gate stops softly every time.
Control board diagnosis and replacement
Control boards in Palm Beach commercial operators fail from salt bridging across circuit traces. We can often clean and reseal a board that’s still functional. When a board is too far gone, we replace it with a factory option for DoorKing, Viking, or Elite, and we re-terminate every connection with dielectric grease to slow the next round of corrosion.
Trusted Brands We Service in Palm Beach
Our techs are factory-familiar with Viking, Ghost Controls, DoorKing, and Elite, among others. That matters when you own a Viking operator on a Palm Beach property and don’t want a generic repair person guessing at the wiring. We stock common boards, remotes, and hardware for these brands so Palm Beach customers aren’t waiting a week for parts. When the fix is a board swap on a DoorKing commercial unit or a Ghost Controls residential arm, we can often complete it the same day we diagnose it.
Common Electric Gate Repair Problems We See in Palm Beach Homes
- Salt-corroded operator boards. Ocean mist carries conductive salt that bridges across circuit board terminals, causing the gate to open or close without a command. This is the number one failure we see on barrier island properties.
- Frozen hinge pins and binding swing gates. Painted steel hinges on South Ocean and El Bravo Way seize up in a season or two. The gate gets harder to move, the motor strains, and eventually the operator burns out trying to push a gate that won’t swing freely.
- Sagging gates from shifting posts in sandy soil. Palm Beach sits on sand. Undersized post footings let hinge posts lean over time, and the gate panel drags. Adjusting the hinges won’t fix it; the post itself has to be reset and grouted.
- Phantom open/close commands. We see this across the island, especially near marinas. Radio interference and corroded receiver boards make gate operators act possessed: opening at 3 a.m., closing on a car, refusing to respond to the remote.
Pricing for Electric Gate Repair in Palm Beach, FL
Our Electric Gate Repair pricing in Palm Beach breaks down like this. A basic keypad or remote reprogramming runs $140 – $220. A limit switch or safety sensor replacement typically lands between $180 and $320. A full control board replacement runs $280 – $520 for residential operators, and commercial operator repairs run $320 – $900. Hinge pin and hardware replacement with 316 stainless runs $200 – $450 depending on how many hinges are seized. Parts are quoted separately and approved in writing before we order anything. Your price is locked before work begins, and if the repair fails within 365 days, we come back free.
Call (903) 417-0793 for an exact quote. Estimates are free.
We Also Serve Cities Near Palm Beach
From our dispatch hub serving South Florida, we send electric gate repair crews across Palm Beach, Palm Beach County, and into West Palm Beach, North Palm Beach, Greenacres, and Palm Beach Gardens. If your gate is down and you’re anywhere near the Intracoastal, call (903) 417-0793 and we’ll route the nearest available tech.
Why Salt Air Destroys Gate Hardware Faster on the Barrier Island
In Palm Beach, you’re not just dealing with humidity; you’re dealing with an onshore breeze that carries fine salt particles across everything metal. Gates on the island corrode several times faster than gates just across the Intracoastal in West Palm Beach. The difference is measurable. A galvanised steel gate operator that looks fine for a decade in Greenacres can show serious corrosion at the motor housing and hinge welds in three to five years on El Vedado Road or Clarke Avenue. We recommend washed galvanised steel or 316 stainless hardware for any gate within a mile of the ocean. Painted steel doesn’t last. It looks good for a year, then the paint blisters at the welds, rust creeps under the coating, and the hinges bind. If you’re replacing hinge pins or a gate frame in Palm Beach, 316 stainless is the spec that actually holds up.
What Fails First on a Palm Beach Gate
It’s rarely the motor. It’s almost always the hinge pins, the limit switches, and the control board, in that order. Hinge pins corrode and seize, and the motor is forced to work harder until it burns out. Limit switches, which are the tiny sensors that tell the gate where to stop, oxidize their contacts and stop reading position correctly. Then the gate over-travels, slams, or stops three feet short. Control boards develop what we call conductive salt bridges: ocean mist settles on the board, the salt residue conducts electricity between traces that should be isolated, and the gate starts opening and closing without any input. A homeowner on Via Bellaria called us because their LiftMaster swing gate had stopped opening on schedule. The operator board was caked in salt corrosion and the hinges were frozen. We replaced the board and all hinge pin hardware with 316 stainless, applied a marine-grade lubricant, and adjusted the limit switches. The gate now cycles smoothly and the keypad entry works reliably.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Palm Beach
Salt air corrodes the metal parts faster and deposits conductive salt residue on the control board, causing erratic operation and premature motor failure. You’ll see it first at the hinge pins and the board terminals. Coastal-rated sealed components and marine-grade hardware slow the damage significantly.
Washed galvanised steel and 316 stainless hardware hold up best, especially for hinge pins, brackets, and fasteners within a mile of the ocean. Standard painted steel will corrode at the welds and under the paint within a few years on the barrier island. We spec 316 stainless for every coastal replacement.
Because the hinge post itself is shifting in sandy soil. Palm Beach is built on sand, and undersized post footings allow the post to lean under the gate’s weight. No amount of panel adjustment fixes that. The post needs to be excavated, reset, and grouted with a proper footing.
Yes. Several manufacturers, including Viking and DoorKing, offer sealed or conformal-coated boards designed for humid, salt-exposed environments. We also re-terminate every board connection with dielectric grease to prevent another salt bridge from forming. A board replacement in Palm Beach typically runs $280 – $520.
Test it monthly. Walk past the beam while the gate is closing; it should stop and reverse immediately. On Palm Beach properties, salt film builds on the photocell lens over time and reduces its range, so even if the gate passes one test, the sensor may be degrading. Call (903) 417-0793 if your gate doesn’t reverse; this is a safety component you don’t want failing when a car or a child is in the path.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Palm Beach since 2009.