Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Pasadena
An electric gate that won’t open in Pasadena is more than an annoyance, it’s a security gap and a daily hassle. We’re Calder Gate Repair, and we fix automatic gate systems across Pasadena the same way we’d want ours fixed: a real person on the phone, a written price before any work starts, and a technician who shows up with the parts, the tools, and the brand-specific training to get your gate running right. Most electric gate repairs in Pasadena take one visit. Call (903) 417-0793 and you’ll talk to a live person who can book your visit and give you a straight answer on cost.
Why Calder Gate Repair Is Pasadena’s Preferred Electric Gate Repair Company
Pasadena gates fail differently than gates in drier, sandier parts of Texas. Our techs know this because we’re here, responding to calls in Pasadena neighborhoods where clay soil, gulf humidity, and storm-surge power flickers create a specific set of gate problems. When a Pasadena customer tells us their gate is dragging at the latch or the keypad works sometimes but not others, we already have a short list of likely culprits. That local experience means less time diagnosing and less money spent replacing the wrong part.
Calder Gate Repair is part of the Relay Home Co. family, established 2009, and every location is independently owned and operated under The Relay Visibility Guarantee. That guarantee is the reason you’ll never sit through a four-hour window hoping someone shows up. You’ll get a live, trackable arrival time, a uniformed background-checked technician, before-and-after photos, and a digital invoice you pay from a link. The price on that invoice is the same price we quoted and you agreed to before any work began. Every repair is also covered by our 365-Day Done Right Promise: if the repair fails within a year, we come back free.
Automatic Gate Repair in Pasadena
Automatic Gate Repair in Pasadena typically means diagnosing why a gate that used to open smoothly now hesitates, groans, or refuses to budge. In our experience across Pasadena, the most common culprits are clay soil movement shifting the gate posts, corroded safety sensors from gulf humidity, or a control board that took a hit during a storm. A standard automatic gate repair in Pasadena runs $145 – $385 before parts, depending on whether we’re correcting an alignment problem, replacing a sensor pair, or rebuilding a hinge post. You’ll know the exact number before we turn a single bolt.
Hinge Post Correction and Gate Re-Leveling
When Pasadena’s heavy clay soil cycles through wet and dry seasons, it swells and contracts enough to lean a gate post by half an inch or more. That lean throws the operator out of alignment and makes the gate drag. We re-set posts, re-pour footings where needed, and re-level the gate so the motor isn’t fighting resistance every cycle.
Sensor and Safety Loop Repair
Gulf Coast humidity accelerates corrosion on photocells and keypad contacts in Pasadena. We test every safety input, clean or replace corroded connections, and verify the gate reverses properly before we call the job done. Photocell replacement in Pasadena typically runs $95 – $220 per set.
Electric Gate Motor in Pasadena
Electric Gate Motor work in Pasadena often starts with a question: repair or replace? We give you a straight answer based on the motor’s age, brand, and failure mode. A gate motor repair in Pasadena, such as a capacitor replacement or limit switch adjustment, typically runs $165 – $320. A full motor replacement runs $850 – $2,400 depending on the brand and gate style, and we never push a replacement when a repair will hold. The price is written before we start, always.
Operator Alignment and Gear Service
On slide gates especially, rack and pinion gears wear unevenly when the gate isn’t level. We check gear mesh, adjust the operator mount, and replace worn components before they strain the motor into an early failure. It’s the difference between a $200 gear service and an $1,800 motor replacement six months later.
Control Board Diagnostics
Storm-driven power surges are hard on gate operator boards. If your opener is unresponsive after a storm, we test the incoming power, the transformer, and the board itself before recommending a swap. Board replacement in Pasadena runs $240 – $520 installed, and we’ll confirm the diagnosis before any part gets ordered.
Trusted Brands We Service in Pasadena
Our techs are factory-familiar with nine leading gate opener brands, and we carry local parts stock for FAAC, Linear, and Viking systems, three of the most common openers we see on Pasadena gates. Whether you have a Viking swing arm on a San Gabriel Boulevard property or an older FAAC slide operator on a ranch gate east of town, we’ll work with the system you already have rather than pushing you toward a brand we prefer. We also service LiftMaster, BFT, Ghost Controls, DoorKing, Elite, and Mighty Mule. Parts for most common repairs are on the truck at dispatch.
Common Electric Gate Repair Problems We See in Pasadena Homes
- Gate dragging or binding at the latch: Pasadena’s expansive clay soil shifts hinge post footings through wet-dry cycles, leaning posts and throwing the gate out of square. We re-pour footings and re-level the gate rather than just lubing the hinges and hoping.
- Intermittent keypad or remote failures: Gulf humidity and salt air corrode contacts inside outdoor keypads and safety photocells. This shows up as a gate that works sometimes, then stops, with no obvious pattern.
- Dead operator after a storm: Power surges from Gulf thunderstorms fry control boards, especially on older systems without surge protection. If your gate died during or right after a storm, the board is the first thing we check.
- Noisy slide gate operation: When footing movement drops one end of the track, the rack and pinion mesh goes bad and the motor strains every cycle. Grinding or chattering sounds on a slide gate are an early warning to re-level before the motor burns out.
Pricing for Electric Gate Repair in Pasadena, CA
Here’s what Pasadena homeowners can expect. A basic service call and safety inspection runs $85 – $145, which includes the diagnostic time. Sensor or keypad repair runs $95 – $220. A hinge post re-set with new footing runs $350 – $650 depending on depth and accessibility. Control board replacement runs $240 – $520 installed. Full motor replacement runs $850 – $2,400. Every job gets a written price before work starts, and that number doesn’t change at the door. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near Pasadena
Calder Gate Repair handles Electric Gate Repair throughout the Pasadena area. Beyond city limits, we regularly serve Pasadena neighbors in San Marino, South Pasadena, Altadena, and San Gabriel, with the same live-answer phone line and written pricing.
Serving Pasadena, CA - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pasadena
Because the hinges usually aren’t the real problem. Pasadena sits on expansive clay soil that swells with rain and contracts in dry heat, moving gate post footings by enough to lean the post. We were called to a home near Burke Road where a LiftMaster swing gate kept dragging at the latch; the hinge post footing had settled about an inch, tilting the post and throwing the operator out of alignment. Re-setting the footing and re-leveling the gate fixed it permanently. Call (903) 417-0793 if your gate sags or drags, we’ll check the footings before replacing any hardware.
Check whether the operator has power at the outlet or breaker first, then look for a visible surge mark on the control board. Storm-driven power surges are the most common cause of dead operators in Pasadena after weather events, especially on older LiftMaster and FAAC systems. If the breaker is fine and the display is dark, call us, a board may need replacing. Board replacement runs $240 – $520 installed in Pasadena.
Your gate should have working safety photocells and reverse immediately when the edge contacts an obstruction. Gulf humidity corrodes photocell contacts in Pasadena faster than inland, so sensors that look fine can fail intermittently. We test every safety input on every repair and confirm reversal pressure is set correctly before we leave. If you’re not sure, a safety inspection is $85 – $145.
In most cases, yes, we can replace the rack or pinion gear and re-level the gate. Worn gears and noisy operation usually come from footing movement over Pasadena’s clay soil, not from a bad motor. We’ll show you the worn part and give you a written repair price before any work starts. Call (903) 417-0793 for an assessment.
Yes, we service solar gate openers, including panel testing, battery replacement, and charge controller diagnostics. Pasadena’s heat shortens battery life on solar systems, so if your gate slows or loses power overnight, the battery is usually the first thing we check. We’ll confirm the issue and give you a repair price in writing before we begin.
Get Your Pasadena Gate Fixed Today
If your electric gate is acting up in Pasadena, call (903) 417-0793 now. A live person answers 24/7, no voicemail, no call-back request. We’ll schedule your visit, give you a real arrival window, and put your price in writing before any work begins. Every repair is backed by the 365-Day Done Right Promise, and if it fails, we return free.
Written by Nico Alvarez, Owner at Calder Gate Repair.