Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across Plano
An electric gate that won’t open, closes halfway, or reverses for no reason is more than a hassle in Plano. It’s a security issue and a daily obstacle. Most Plano gate repairs come down to one of three things: a footing that’s shifted in our clay soil, a control board that’s heat-stressed, or an opener that’s lost its limits. Calder Gate Repair fixes all three, and we’ll give you a written price before we touch a single bolt. If you’re stuck outside your gate right now, call (903) 417-0793 and a live person will answer.

Why Calder Gate Repair Is Plano’s Preferred Electric Gate Repair Company
Plano homeowners call us because we show up when we say we will, with a trackable arrival time instead of a four-hour window. Our technicians are background-checked, uniformed, and factory-familiar with nine major opener brands, so the diagnosis comes from someone who knows the equipment, not someone figuring it out in your driveway.
We’re part of the Relay Home Co. family, established 2009, with each location independently owned and operated. Led by Nico Alvarez, our team serves Plano from the brand’s Dallas-Fort Worth office. Every job carries the 365-Day Done Right Promise: if your repair fails within 365 days, we return at no charge. That guarantee is written on every repair, never verbal-only.
Plano-specific experience matters. We know which neighborhoods have older gate systems and which have newer builds with different opener brands. We know the clay soil here moves posts. We know the heat cycles stress control boards. That local knowledge means we diagnose the actual problem, not the symptom.
Electric Gate Motor in Plano
Electric gate motor work in Plano usually means one of two things: the motor itself has failed, or the motor is working hard against a gate that’s binding because the post has shifted in clay soil. We check both before recommending anything, because replacing a motor without fixing the footing just kills the new motor within a season. Most motor repairs in Plano run $260 – $520 before parts, depending on whether we’re replacing the capacitor, the limit switches, or the motor assembly itself.
Motor Replacement Without Reworking the Gate
If the gate itself is square and the posts are solid, we can replace just the motor and keep your existing gate structure. We match the replacement to your current opener brand when possible, or upgrade you to a more reliable unit if your old motor is discontinued. The new motor gets its travel limits and force settings learned on-site, not guessed from a manual.
When the Motor Isn’t the Problem
A surprising number of “motor failures” in Plano are actually post failures. If your hinge post has heaved in the clay, the gate binds and the motor overheats trying to push it. We’ll tell you if that’s the case before selling you a motor, because the honest fix is resetting the footing, not swapping parts.
Gate Access Control in Plano
Gate access control in Plano covers everything that tells your gate who to let in: keypads, remotes, intercoms, loop detectors, and the control board that ties them together. When a Plano homeowner says “my keypad works sometimes,” the problem is usually the control board or a heat-damaged component in the cabinet, not the keypad itself. Access control repairs in Plano typically run $180 – $420, with keypad replacement at the lower end and full control board replacement higher.
Keypad and Remote Repair
Keypads in Plano take direct sun on the west side of most homes, which shortens their life. We replace them with weather-rated units and program them to your existing opener. Remotes are the easiest fix: we test the signal, replace or reprogram as needed, and pair everything before we leave.
Control Board and Safety Sensor Service
Control boards fail from heat cycling and moisture, especially in cabinets mounted where afternoon sun hits them. We diagnose board faults directly rather than guessing, then replace with compatible parts. We also re-aim and re-test photocells and safety edges after every access control job, so your gate reverses properly when something is in the way.

Trusted Brands We Service in Plano
We service Electric Gate Repair systems from Viking, Ghost Controls, DoorKing, and Elite, among others. Our stock of common parts for these brands means we often complete Plano repairs the same day we diagnose, without waiting on a parts shipment. If your opener is a brand we don’t carry parts for on the truck, we’ll source them and give you a clear timeline before any work starts.
Common Electric Gate Repair Problems We See in Plano Homes
- Post heave from clay soil. Plano sits on the eastern edge of the black clay belt, and posts here move with seasonal moisture swings. A gate that’s suddenly binding or stopping halfway may have a hinge post that’s lifted or rotated, not a dead motor.
- Heat-stressed control boards. Cabinet-mounted boards and loop detectors in sun-baked corners take heat and moisture cycling, causing intermittent no-open faults that only show up mid-afternoon. We test boards under load to catch these.
- Sagging swing gate panels. Years of Plano heat and clay-driven post movement cause panels to sag and drag on the driveway. The gate trips its reversal cycle, and owners often blame the motor when it’s actually the geometry.
- Photocell drift and misalignment. Safety sensors get bumped by landscaping, shifted by soil movement, or covered in dust from Texas wind. The result is a gate that refuses to close or reverses mid-cycle for no apparent reason.
Pricing for Electric Gate Repair in Plano, TX
Here’s what we actually charge in Plano, no vague answers. Keypad replacement runs $85 – $165. Remote programming or replacement runs $45 – $120. Safety sensor or photocell repair runs $120 – $240. Gate motor repair runs $260 – $520 before parts. Control board replacement runs $180 – $420. Full access control setup, including keypad, intercom, and loop detector, runs $500 – $1,100. Every job gets a written quote agreed before any work begins, and the invoice matches that quote. Estimates are free. Call (903) 417-0793 for an exact number.
We Also Serve Cities Near Plano
Our Plano crews also cover Allen, Richardson, Addison, and The Colony. If you’re in one of those cities and need Electric Gate Repair in Plano or the surrounding area, the same 365-Day Done Right Promise and live 24/7 phone answer apply. We dispatch from our Dallas-Fort Worth office to wherever you are.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Plano
It’s more likely the gate than the operator in Plano. Clay soil heaves posts, the gate goes out of square, and the operator trips its limits early because it feels resistance. We check the post footing and gate alignment before blaming the motor, which saves you from paying for a motor you don’t need. Call (903) 417-0793 and we’ll diagnose it on site.
Yes, if the gate is square and the posts are solid. We match the new motor to your existing opener brand where possible, set travel limits and force on-site, and you keep your gate structure. If the post has shifted, we’ll tell you that first, because a new motor on a binding gate fails again within months. Estimates are free at (903) 417-0793.
Yes. Current safety standards require auto-reverse protection on electric gates, which means photocells, safety edges, or both, depending on the gate type. We re-aim and re-test these after every repair, so your gate reverses properly when something is in the path. If yours are missing or bypassed, we’ll bring your gate into compliance as part of the repair.
Most keypad, remote, sensor, and control board repairs take 1 – 2 hours on site. Motor replacements usually take 2 – 3 hours. Footing resets and gate re-hangs can take a half day, because the concrete needs time before the gate can be re-hung. We give you a time estimate with your written quote, and you track our arrival in real time.
Intermittent keypad or remote issues usually point to a heat-stressed control board or a receiver mounted in direct afternoon sun. Plano’s heat cycling causes connections to expand and contract, creating intermittent faults that test fine when cool. We diagnose the board under load to catch the fault, then replace the actual problem part. Call (903) 417-0793 for a diagnosis.
Need your Plano gate working again? Call Calder Gate Repair at (903) 417-0793 for a free estimate. A live person answers 24/7, and every job gets a written price before any work starts.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Plano since 2009.





Before
After
Before
After
Before
After