Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across Redlands
An electric gate that won’t open, won’t close, or stops halfway through its cycle is more than a hassle in Redlands. It’s a security gap. Calder Gate Repair specializes in Electric Gate Repair for homes across Redlands, CA, and we get there fast when your opener fails. Most repairs in Redlands run between $180 and $450 before parts, and we put that number in writing before any work begins. Call (903) 417-0793 and a live person answers, 24 hours a day.

We know the neighborhoods here. Front gates off Sunset Drive, swing gates on the citrus-era lots near Brookside, slide gates down by Crafton. The roads, the weather, the way older Redlands properties are wired. That local knowledge saves time when your gate is down and your property is exposed.
Why Calder Gate Repair Is Redlands’s Preferred Electric Gate Repair Company
Calder Gate Repair is the dedicated gate repair specialist inside the Relay Home Co. family, which has been at this since 2009. Each location is independently owned and operated under The Relay Visibility Guarantee. Led by Nico Alvarez, our team trains on nine major gate opener brands, including Linear, Viking, Ghost Controls, and DoorKing, so we’re not learning on your gate while it’s hanging open.
When you book with us in Redlands, you get a trackable arrival time sent to your phone, not a four-hour window. Your technician arrives in uniform, background-checked, and ready with the parts most likely to fix your opener on the first visit. Before anything gets unbolted, you get a written price. The invoice matches that price, period. That’s the Relay Standard, and we don’t bend it.
Automatic Gate Repair in Redlands
Automatic gate repair in Redlands often looks different from denser cities nearby. Long driveway runs mean operators work harder, batteries drain faster, and wiring has further to travel. We see voltage drop problems, tired solar charge controllers, and openers that trip intermittently because they’re simply not getting the power they need from a panel that’s hundreds of feet away.
When a Redlands homeowner calls us for automatic gate repair, we check the full run: power to the operator, battery and charge controller health, the loop detector, the safety photocells, and the mechanical condition of the gate itself. Repair prices in Redlands typically start around $180 for limit switch or keypad work and run up to $450 or more for control board replacement or swing arm motor swaps, before parts.
Repair vs. Replace on Older Operators
Plenty of Redlands gates run on operators that are 15 years old or older. Sometimes the smartest repair is a partial one: replace the control board, resolder or replace the limit switch, and give the gate another few years of service. We’ll tell you straight if a full replacement saves you money over the next 24 months.
Repairs That Include Safety Reversal Testing
After any automatic gate repair in Redlands, our tech re-runs reversal testing and confirms the photo-eye and edge sensors are working. We won’t clear a call until the gate stops and reverses the way UL 325 and California code expect it to.
Electric Gate Motor in Redlands
Electric gate motor problems in Redlands are usually one of three things: a motor that’s burned out from strain, a motor that’s not receiving consistent power, or a gearbox that’s worn from years of dust and heat. We diagnose them in that order and quote the fix before touching anything.
Motor replacement in Redlands generally runs $350 to $800 for single-family swing or slide gates, depending on brand and operator type, plus parts. Repair work on a functioning motor, like replacing a capacitor or a drive gear, often lands between $190 and $320. Either way, you’ll see the number in writing first.
Swing Gate Motors and Hinge Post Sags
On older Redlands ranch properties, a “motor failure” is often actually a post problem. The soil around the hinge post settles, the post leans, and the gate binds as it swings. The motor strains, then burns out. We correct the sag, true the post where possible, and replace the motor if it’s already damaged.

Solar and Low-Voltage Motors
Long Redlands driveways mean many gate motors run on low-voltage or solar power. If your motor starts and stops or refuses to respond on cloudy days, the issue is usually the battery bank or the charge controller, not the motor itself. We test the whole circuit before recommending a motor swap.
Trusted Brands We Service in Redlands
Calder Gate Repair is factory-familiar with nine leading opener brands. Around Redlands, we most often service LiftMaster, FAAC, BFT, Linear, and Viking openers, along with Ghost Controls and DoorKing units on the newer solar installations. We keep common control boards, remote receivers, limit switches, and photocells stocked and ready for Redlands service calls, which means faster turnaround when your gate is down. If we need a brand-specific part, we source it directly through established parts channels, no middleman delays.
Common Electric Gate Repair Problems We See in Redlands Homes
- Voltage drop on long runs. Driveways in Redlands can run 100 feet or more from the house panel. Undersized wiring or aging connections cause the opener to starve for power, and the gate fails intermittently, especially under load.
- Settled hinge posts on citrus-era lots. Many Redlands properties predate modern grading standards. Soil shifts, the gate sags, and the operator overworks itself trying to move a gate that no longer swings square.
- Dust and grove grit in slide tracks. Unpaved driveways and nearby groves throw fine dust into roller tracks and rack-and-pinion gears. Operators go into fault mode, or the gate grinds and stalls.
- Solar charge failures on shaded runs. Gates set back under mature Redlands oaks or against hillside shade often underproduce on solar. The battery depletes, and the opener goes dead exactly when you need it.
Pricing for Electric Gate Repair in Redlands, CA
Here’s what we see in Redlands on a typical service call:
- Keypad or remote programming: $95 – $140
- Limit switch replacement: $180 – $240
- Solar charge controller replacement: $220 – $320
- Motor capacitor or drive gear repair: $190 – $320
- Full motor replacement: $350 – $800 before parts
- Control board replacement: $280 – $450 before parts
These are honest ranges, not lowball teasers. What changes the number is the gate’s condition, access to the existing wiring, and whether the job is a swap or a full rewire. Every quote is written and agreed before work starts. Free estimates by phone, and the invoice you get after is the price you were quoted before. That’s non-negotiable at Calder.
We Also Serve Cities Near Redlands
Beyond our work across Redlands, Calder Gate Repair covers Loma Linda, Mentone, Colton, and Highland. If your property sits near the city line or your gate serves a lot off Highway 38 toward Mentone, we’re still local. Call (903) 417-0793 and we’ll confirm coverage and give you a straight answer on timing.
Serving Redlands, CA - Our Local Coverage Area
We’re based in the Redlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Redlands
On solar-powered operators, cloudy days mean the panel doesn’t produce enough to keep the battery charged. Shaded runs make it worse. The fix is usually a battery health check and charge controller replacement, not a new motor. Call (903) 417-0793 and we’ll test the whole solar circuit and quote the repair in writing.
No. Installation is measured, ordered, and scheduled. We provide free measure and a written price, then order the gate and operator and set a firm installation date. Quality gate work involves groundworks, power runs, safety edges, and reversal testing. We don’t rush it. For repairs, we can often get to Redlands the same day.
Usually not. On Redlands ranch and citrus-era properties, the sag is typically in the hinge post, not the panel. We correct the post footing, true the gate, and often save the existing panel. Replacing the panel without fixing the post gives you the same problem in a year.
Yes. California code requires photo-eyes and an operational auto-reverse function on automatic gates. Our repair work always includes reversal testing and photocell verification before we call the job done. If yours are missing, we’ll flag it and quote the retrofit.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Redlands, we see a lot of Linear and Viking on the older properties, and more Ghost Controls and DoorKing on newer solar installs. Call (903) 417-0793 for a free estimate on any of these brands.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Redlands and the Inland Empire.
Need help now? Call (903) 417-0793 and a live person answers, day or night. You’ll get a written price before any work starts, a trackable arrival time, and a repair backed by the 365-Day Done Right Promise. If it fails within a year, we’re back at no charge.





Before
After
Before
After
Before
After