Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Folsom, CA
When a gate stops opening in Folsom, it’s rarely just the motor. It’s a limit switch – the small sensor that tells the gate where to stop – baked by weeks of Sacramento Valley heat, or a hinge worn loose by an automatic opener fighting the weight of a solid steel panel. Calder Gate Repair handles it all, and every job starts with the same promise: a written price before any work begins. Call (903) 417-0793 and a live person answers, 24/7 – not a voicemail, not a bot.
Why Folsom Homes Are Different
Folsom sits in a climate band that’s hard on exterior hardware. Summer afternoons routinely cross 100 degrees, and that heat is rough on plastic limit switch housings, capacitor leads, and the nylon gears inside older opener heads. We’re also dealing with a specific housing stock: large lots in neighborhoods like Broadstone and Empire Ranch where driveway gates are wide, heavy, and often custom-fabricated. A builder-grade opener installed when the house was built in the late 1990s or 2000s is now 20-plus years old – right at the end of its rated service life.
Terrain matters too. Many Folsom properties slope from street to garage, so the gate has to work against grade and the operator has to hold position without creeping. And quite a few HOAs in Folsom have architectural review requirements for any change to a street-facing gate – paint color, opener head type, even the box. We’ll help you figure out what crosses the line and what doesn’t before you spend a dollar.
Our Main Folsom Services
Most calls in Folsom are one of two things: a gate that won’t move, or an opener that runs but does nothing. Here’s what each involves locally.
Gate Repair in Folsom
A gate that drags on the pavement in Folsom’s summer heat is usually a hinge problem, not a motor problem. Steel expands in the sun, and the weight shift bends hinge pins over time. We straighten or replace hinges, re-hang panels, fix weld breaks, and adjust the gate so the opener stops grinding against the load. Whether your gate is a sliding panel off East Natoma or a swing gate in a Broadstone driveway, we start every repair with a measured inspection and a written price. Read the full breakdown on Gate Repair in Folsom.
Electric Gate Repair in Folsom
Electric gates add wiring, control boards, and safety edges to the mechanical side. In Folsom, older residential installs often have underground wire runs that degrade in clay soil, and rodents near the American River Parkway don’t help. We trace the run, test the board, and replace only what’s failing. If your gate opens partway then reverses, or the keypad works only when it wants to, you’ll want to read Electric Gate Repair in Folsom.
Gate Opener Repair in Folsom
The opener is the motor and gearbox that moves the gate. Most in Folsom are chain-driven or belt-driven arms mounted to the gate frame, and the two common failures are stripped plastic drive gears and blown control board capacitors – both made worse by our temperature swings. We open the unit, identify the brand and model, and replace the part. For the full scope, see Gate Opener Repair in Folsom. Every repair at Calder carries the 365-Day Done Right Promise: if the repair fails within a year, we come back at no charge.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Folsom
We’re factory-familiar with the openers Folsom homeowners actually have: Linear, Viking, Ghost Controls, and DoorKing, among others. We keep common control boards and limit switches stocked locally and most parts arrive within a day. See our brands for the full list.
Pricing for Gate Company in Folsom, CA
| Service | Typical range in Folsom |
|---|---|
| Service call diagnostic | $79 – $129 (waived if we do the repair) |
| Gate hinge replacement | $180 – $450 per hinge |
| Gate opener motor replacement | $350 – $750 |
| Control board replacement | $250 – $600 |
| Limit switch replacement | $110 – $220 |
| Safety sensor or photo eye replacement | $140 – $300 |
| Keypad replacement | $150 – $350 |
| Remote or receiver replacement | $75 – $200 |
| Chain or belt replacement | $160 – $380 |
| Full gate opener unit replacement | $750 – $1,800 |
Prices land on the higher end of these ranges when a Folsom gate is oversized, custom-fabricated, or runs on old wiring that needs to be brought up to code. Whatever the number, you’ll see it in writing before we touch a single bolt – the invoice you pay matches the price you approved.
Neighborhoods We Serve in Folsom
We run repair calls across Folsom daily, from the older streets near Sutter Street to the newer communities up and down East Natoma. Typical response is same-day or next-day for most opener and electric gate issues.
- Broadstone
- Empire Ranch
- Natoma Station
- American River Canyon
- Briggs Ranch
Service Area – Cities Near Folsom
Our Folsom crews also cover the neighboring communities when a gate fails on the wrong side of the county line. We answer calls in Orangevale, CA, El Dorado Hills, CA, Granite Bay, CA, and Fair Oaks, CA. Same written-price rule applies in every city we serve.
Serving Folsom, CA - Our Local Coverage Area
We’re based in the Folsom area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Folsom
For most gate and opener failures, we can have a technician to your door same-day or next-day. Background-checked, uniformed techs arrive with a live, trackable arrival time – not a four-hour window. Call (903) 417-0793 and a person answers, day or night.
It depends on the job. Repairs and part replacements that don’t change the look of the gate usually go ahead without review. Swapping an opener head, changing a keypad, or repainting may need approval. We’ll flag it before you commit to anything.
Estimates are free. You get a written price before any work starts, and that’s the number on the invoice – no surprise line items, no add-ons at the door. Call (903) 417-0793 to schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Folsom Customers Say
"Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.