Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Seabrook
An electric gate in Seabrook that won’t open, won’t close, or stops mid-travel usually comes down to a handful of coastal-specific failures: corroded control boards, rusted rack and pinion gears, or water-damaged loop detectors. Most gate opener repairs in Seabrook run $180 – $340 before parts, and Calder Gate Repair can usually have a tech at your door the same day you call. If your gate is stuck, humming, or ignoring the remote, call (903) 417-0793 and a live person answers, 24/7.
We know Seabrook’s gate failures because we work them every week, from the canal-lot driveways off Todville Road to the gated entries near the Kemah bridge and the older subdivisions around Bay Area Boulevard. Salt air, high humidity, and storm surges change how gates fail here, and that changes how we repair them.
Why Calder Gate Repair Is Seabrook’s Preferred Electric Gate Repair Company
Seabrook homeowners keep calling Calder back for one reason: the price we quote at the door is the price on the invoice. Before any work begins, you get a written number. If we find something else while we’re in there, we stop and talk to you first. No surprise line items, no “while we were in there” add-ons.
Every repair carries the 365-Day Done Right Promise, in writing. If the repair fails within 365 days, Calder returns at no charge. That’s not a “we’ll take a look” policy; it’s a named guarantee with a free second visit baked into it from the first bolt.
Our technicians arrive in uniform, background-checked, with a live arrival time you can track from your phone. You’re not waiting on a four-hour window. Nico Alvarez leads the Seabrook repair crew, and his team is factory-trained on the gate opener brands most common along Clear Lake: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Calder Gate Repair is part of the Relay Home Co. family, established 2009, with each location independently owned and operated under The Relay Visibility Guarantee. Dispatch and scheduling are coordinated from the brand’s Houston office; crews serve Seabrook locally.
Electric Gate Motor in Seabrook
Electric Gate Motor repair in Seabrook is the single most common call we get, and in this town it’s almost always a salt-air problem: the motor still works but the control board has moisture damage, or the gear train has seized from rust. A typical electric gate motor repair in Seabrook runs $220 – $380 before parts, depending on whether we’re replacing a capacitor, swapping a control board, or freeing a seized gearbox.
When the Motor Hums but the Gate Doesn’t Move
That hum is the motor getting power but fighting a seized rack, a bound gear, or a failed capacitor. In Seabrook, coastal humidity accelerates rust inside the gear housing, so a gate that worked fine in October can bind up in April. We bench-test the motor on the truck, isolate whether it’s an electrical or mechanical fault, and only then recommend repair or replacement. You’ll hear us say things like “limit switch” – that’s the small sensor that tells the gate when to stop – and we’ll explain it plain, not talk over you.
Motor Replacement vs. Rebuild
If the motor windings are burned or the gearbox is worn past tolerance, we’ll show you the numbers: rebuild cost, replacement cost, and expected lifespan for each. On a Linear or Viking operator under ten years old, a rebuild often makes sense. On an older unit with a rusted chassis and corroded terminals, replacement is the honest call. Either way, the price is written before we turn a wrench.
Gate Access Control in Seabrook
Gate Access Control in Seabrook covers the parts of your gate that decide who gets in: keypads, remotes, loop detectors, safety sensors, and the control board tying it all together. When a Seabrook gate ignores the keypad but opens from the wall button, the problem is usually in the access control wiring, not the motor. Access control repairs in Seabrook typically run $160 – $320 before parts.
Keypads, Remotes, and Loop Detectors
We see a lot of water-damaged keypads on canal-lot driveways, especially after heavy rain backs up drainage and leaves the keypad housing sitting in standing water. Remotes fail more quietly: a worn membrane button, a dead battery, or a receiver board that stopped listening. Loop detectors – the buried wire loops that tell the gate a car is present – fail when water gets into the housing, which happens more often in low-lying Seabrook driveways than anywhere inland.
Control Boards and Safety Sensors
The control board is the gate’s brain, and in Seabrook’s humid air it’s the most vulnerable part of the whole system. Corrosion on the board can cause random stoppages, false obstacle trips, or a gate that starts and stops with no rhyme or reason. We replace boards on LiftMaster, FAAC, DoorKing, and every other major brand, and we always re-seal the housing and add dielectric grease to the terminals before we close it up. Safety sensors get checked on every visit, because a gate without working photo eyes is a gate that doesn’t know when to stop closing.
Trusted Brands We Service in Seabrook
We’re factory-familiar with nine major gate opener brands, and we keep common parts for Linear, Viking, Ghost Controls, and DoorKing on our trucks, because those are the ones we see most often on Seabrook driveways. That means fewer “we’ll order the part and come back” visits and more same-day completions. If your gate has a brand name on the cover, we’ve almost certainly worked on it before – and if it’s a Mighty Mule from a big-box store, we can honestly tell you whether it’s worth fixing or better off replaced.
Common Electric Gate Repair Problems We See in Seabrook Homes
- Corroded control boards: Seabrook’s salt-laden air, especially along the canal lots and waterfront properties around Clear Lake, eats circuit boards faster than in inland Houston suburbs. We regularly replace boards that have visible green corrosion on the solder joints.
- Rusted rack and pinion gears: Slide gates along the bay are exposed to salt spray, and the drive rack rusts solid. The motor still runs, but the gate won’t move, or it shudders and skips.
- Water-damaged loop detectors: Low-lying driveways in Seabrook, especially on canal-lot properties, collect standing water after storms. When water sits in the loop detector housing, the gate gets stuck open, stuck closed, or ignores the keypad entirely.
- Sagging hinge posts after storms: Saturated ground from storm surges softens the soil around swing gate hinge posts. The post shifts, the gate sags, and then the operator struggles against a gate that’s no longer square.
Pricing for Electric Gate Repair in Seabrook, TX
Here are the real numbers for Seabrook, before parts:
| Repair Type | Typical Range |
|---|---|
| Opener / motor repair | $220 – $380 |
| Control board replacement | $250 – $450 |
| Keypad or remote repair | $120 – $240 |
| Safety sensor replacement | $140 – $260 |
| Loop detector repair | $180 – $300 |
| Full operator replacement | $900 – $2,400 |
Parts are priced at cost plus a straightforward markup, and you’ll see the part numbers on your invoice. The price you agree to before work starts is the price you pay. Every repair includes the 365-Day Done Right Promise in writing. Full installations are quoted separately, after a free measure and a written scope of work. Call (903) 417-0793 for an exact quote – estimates are free.
We were called to a canal-front home off Todville Road where the slide gate had stopped mid-travel; the LiftMaster operator would hum but not move the panel. Our tech found the rack and pinion was rusted solid from salt air and the loop detector had water in its housing, so we replaced the drive rack, dried and resealed the detector, and re-leveled the gate track. The gate now runs clean on every cycle, and we showed the homeowner the safety photocell test so they could check it monthly.
We Also Serve Cities Near Seabrook
If you’re in League City, Bacliff, Webster, or La Porte, we cover those too. Calder Gate Repair runs local crews throughout the Clear Lake area, so you get the same written pricing, live arrival time, and 365-Day Done Right Promise whether your gate is in Seabrook proper or just over the city line. Electric Gate Repair is all we do, all day, across this part of the Texas Gulf Coast. Learn more about our Electric Gate Repair in Seabrook coverage area.
Serving Seabrook, TX - Our Local Coverage Area
We’re based in the Seabrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Seabrook
The first thing to check is the breaker and the GFCI outlet the operator plugs into – Seabrook storms trip GFCIs all the time, and a tripped outlet looks like a dead gate. If power is present and the gate still won’t respond, check whether the keypad and remote are both dead (which points to the control board or receiver) or whether the motor hums but the gate doesn’t move (which points to a seized rack or gear). Salt water and storm surge make Seabrook gates fail differently than inland gates, so if you see corrosion on the control board or rust on the rack, call us at (903) 417-0793 before forcing the gate manually. Forcing a rusted gate can strip the gearbox and turn a $200 repair into a full operator replacement.
If your Seabrook gate operator is under ten years old and the failure is isolated – a bad capacitor, a corroded terminal, a water-damaged sensor – repair is usually the honest call, at $180 – $340 before parts. If the motor is burned, the main board is corroded on both sides, and the gearbox is rusted solid, replacement makes more sense. We’ll put both numbers in writing: the repair quote and the replacement quote, side by side, and you decide. We won’t push replacement, because we make no more money either way – the written price is the price, before any work starts.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – nine major brands, factory-trained. In Seabrook specifically, we see a lot of LiftMaster slide operators on canal-lot driveways and DoorKing swing operators on older subdivision entries, so we keep common parts for both on our trucks. If your brand isn’t on that list, call anyway – the odds are high we’ve worked on it, and if we can’t fix it properly, we’ll tell you that too.
Yes, and this is non-negotiable. Every automatic gate in Seabrook needs working safety photo sensors and a properly set reversing mechanism, because a gate closing on a car, a kid, or a pet is not a repair bill – it’s a hospital bill. We test the obstruction reversal on every visit, not just when you ask. If your gate doesn’t reverse when it hits an obstacle, don’t use it until we’ve had a look. Sensor repair runs $140 – $260, and we carry the common photo eye parts for LiftMaster, Linear, and Viking on the truck.
A full electric gate installation in Seabrook runs five to ten working days from measure to final test, depending on whether you need new posts, a concrete pad for the operator, or trenching for the power run and safety loops. This is not a same-day job, and any company that tells you otherwise is cutting corners. We’ll give you a written scope of work, a line-item price, and a start date before we order anything. Seabrook’s saturated ground and coastal wind loads mean the pad and posts have to be done right, not fast. Call (903) 417-0793 for a free measure and written quote.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Seabrook and the Clear Lake area.