Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Selma
When your electric gate stops opening, you don’t want a callback list. You want a technician who knows Selma’s neighborhoods, arrives when promised, and quotes a real dollar amount before touching a bolt. Calder Gate Repair handles electric gate motor failures, access control glitches, keypad dead zones, safety sensor faults, and full opener replacements across Selma, including the neighborhoods around East Front Street, Rose Avenue, and the tree-lined blocks west of Highway 99. We dispatch from our Fresno, Central Valley office, so a crew is typically at your Selma driveway the same day you call. Reach a live person at (903) 417-0793, 24/7.
Why Calder Gate Repair Is Selma’s Preferred Electric Gate Repair Company
Selma homeowners keep our number for one reason: we show up with a plan, a written price, and the parts to finish the job. Our technicians are background-checked, uniformed, and dispatched with a live arrival time you can track from your phone, not a four-hour window. Every repair is covered by the 365-Day Done Right Promise in writing: if the fix fails within a year, we return at no charge. That’s not a verbal assurance. It’s on every invoice.
Nico Alvarez leads our gate repair work, and his crew has seen what Selma’s soil does to gate hardware. From the Sunridge area to the homes near Floral Avenue, the same patterns repeat: posts shift, operators strain, and homeowners get a diagnosis that blames the motor when the footing underneath is the real culprit. We correct that before anything else. It’s why neighbors here keep recommending us, and why no Selma customer waits on a vague callback.
Electric Gate Motor in Selma
Electric Gate Motor work in Selma usually means the operator is overheating, grinding, or failing to respond, and the cause is rarely the motor alone. Before we replace anything, we check the gate’s alignment and footing, because Selma’s expansive clay soil shifts hinge posts over the course of an irrigation season. A motor that worked in February can bind by August when the post has tilted just enough to change the swing geometry.
Expect a typical gate motor repair in Selma to run $240 – $480 before parts. A full operator replacement, where we swap in a new motor unit and recalibrate travel limits and force settings, lands between $680 and $1,250 depending on the brand and gate leaf weight. You’ll see the exact number in writing before we start, and the figure on the final invoice matches it.
Motor Diagnostics and Brand Familiarity
We open up LiftMaster, FAAC, BFT, and Ghost Controls operators daily. Each brand fails differently: FAAC hydraulic motors leak at the piston seals, BFT boards throw error codes when capacitor banks degrade, and LiftMaster units with stripped travel gears grind audibly at the same spot every cycle. Because Calder technicians are trained across these brands, we find the fault fast and avoid replacing a working motor over a $30 sensor.
Footing and Post Corrections Before Automation
In the Sunridge area, we recently repaired a LiftMaster swing gate that was throwing intermittent faults and audibly straining. The motor tested fine. The real problem was visible from the curb: the gate leaf had sagged because the hinge post had shifted in the clay soil. We dug out the footing, re-set the post with a deeper concrete base, corrected the sag, and only then re-checked the operator’s limit settings, serviced the rack and pinion, and verified both safety photocells and auto-reverse under UL 325. The gate now runs smoothly, and the motor isn’t fighting the soil anymore.
Gate Access Control in Selma
Gate Access Control in Selma covers the parts you interact with before the gate ever moves: keypads, remote controls, intercoms, vehicle loop detectors, and the control board that ties them together. When a Selma homeowner calls saying the gate only opens with the remote but not the keypad, or the intercom rings but won’t release the lock, that’s access control work, and it’s usually a fix, not a replacement.
Keypad replacement in Selma typically costs $145 – $295. A new control board runs $320 – $650 installed. Adding a second entry device or converting from a single remote to smartphone app control can push a full access setup to $900 – $1,800, including the wiring and configuration. As with every Calder job, the written price comes first. The invoice never surprises you.
Keypad and Intercom Repairs
Most dead keypads in Selma fail from two causes: corroded connections from irrigation overspray, or blown fuses on the control board after a summer heat spike. We keep common keypad modules and weatherproof housings on our trucks, so a Selma call doesn’t stretch into a two-week waiting period for parts.
Control Board and Safety Integration
Your gate’s control board manages the inputs from every device: keypad, remote, loop detector, phone line, and safety sensors. When it fails, the symptoms mimic other problems: the gate opens halfway, ignores the remote, or reverses for no reason. We bench-test the board before condemning it, because replacing a board when the fault is in a low-voltage wire wastes your money and ours.
Trusted Brands We Service in Selma
We service the gate operators Selma homeowners actually own: FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Slide gates on ranchettes east of town, we frequently see Viking and BFT operators. For residential swing gates, LiftMaster and FAAC dominate. We keep common replacement parts and brand-specific diagnostic tools on hand for Selma service calls, which means fewer second visits and faster turnaround than a shop that has to order every part after arrival.
Common Electric Gate Repair Problems We See in Selma Homes
- Sunken hinge posts from expansive clay soil. Selma’s soil absorbs irrigation water every summer and swells, then shrinks in dry stretches. The cycle slowly tilts gate posts, causing the gate leaf to sag and drag before the operator itself shows a fault. We correct the footing, not just the hinge.
- Slide gates jumping the rack due to misalignment. Seasonal heat and irrigation cycles shift concrete pads under slide gates along Highland Avenue and near Rose Avenue. When the rack and pinion lose alignment, the gate shudders, jumps teeth, or stops entirely. Re-aligning the rack and torque-setting the pinion usually fixes it before motor damage occurs.
- Missing or misaimed safety photocells on aging automatic gates. Many Selma automatic gates were installed without edge sensors or with photocells that have drifted out of alignment. The gate still opens, but the safety system is no longer UL 325 compliant, and the operator may reverse randomly when sunlight hits a misaligned sensor. We check both beams on every call.
- Control boards overheating in summer months. Gate operators mounted in direct sun near Highway 99 absorb serious heat. Capacitor failure and relay burnouts in the control board are the hidden cause of many intermittent “dead gate” calls. Ventilated housings and heat-shield placement extend board life significantly.
Pricing for Electric Gate Repair in Selma, CA
Most electric gate repairs in Selma fall between $180 and $520, with full motor or control board replacements ranging $650 to $1,500 depending on brand and gate weight. Here are the numbers we quote most often:
- Hinge and footing correction (to fix sag): $350 – $750
- Gate motor replacement, residential swing: $680 – $1,100
- Keypad replacement with programming: $145 – $295
- Control board replacement: $320 – $650
- Safety sensor or edge sensor replacement: $180 – $400
- Full access control retrofit with two devices: $900 – $1,800
Those numbers are Selma-specific, not lifted from a national site. They reflect what we charge in this market for this scope of work, parts in hand. Call (903) 417-0793 for a free estimate. You’ll get the number in writing before any work starts.
We Also Serve Cities Near Selma
Our local crews cover more than Selma. If your gate is in Fowler, Parlier, Kingsburg, or Reedley, the same Calder technicians and written-pricing standard apply. We handle the Electric Gate Repair needs of the whole region, and our Electric Gate Repair in Selma team handles the local service area directly.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Selma
Your motor is probably fine. Selma’s expansive clay soil swells with irrigation and shrinks in dry heat, which slowly shifts the hinge post and pulls the gate leaf out of alignment. The sag drags the gate against the ground or frame, and the motor strains harder to move it. The fix is a post footing correction and sag repair before any motor work. Call us for a free assessment at (903) 417-0793.
Yes. Automatic gates operating in Selma must comply with UL 325 safety standards, which means working safety photocells and appropriate edge sensors or entrapment protection. If your gate reverses erratically or closes on an obstruction, your sensors may be misaligned or missing altogether. We test both on every service call, because a non-compliant gate is a liability waiting for an incident. Estimates are free.
A proper installation starts with the foundation work: concrete footings sized for the gate leaf weight, posts set straight in the clay soil, and drainage planned so irrigation doesn’t undermine them. Then we mount the operator, run power and low-voltage wiring, install safety photocells and edge sensors, and test auto-reverse force settings under UL 325. We do not cut corners on the groundworks to hit a lower price. A new installation typically takes one to three days after the concrete cures, with the price fixed in writing before we order anything.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Calder technicians train across all nine brands, so we don’t tell a Selma homeowner to replace a FAAC motor simply because we don’t stock the part. You’ll know the brand before we arrive, and we bring what’s needed. Call (903) 417-0793 for a free quote on your exact model.
The soil hits them differently. A swing gate’s hinge post tilts as the clay shifts, causing the leaf to sag and drag. A slide gate’s concrete track pad can lift or settle unevenly, throwing the rack and pinion out of alignment so the gate shudders or stops mid-travel. Both problems respond to footing work, not just motor tuning. In Selma, that foundation correction is the difference between a repair that lasts a season and one that lasts years.
Call Calder Gate Repair for Electric Gate Service in Selma
When your gate is down, call (903) 417-0793. A live person answers, 24/7. You’ll get a background-checked, uniformed technician with a trackable arrival time, a written price before work begins, and a 365-Day Done Right Promise on every repair. From the Sunridge area to East Front Street and every block between, Calder Gate Repair is the Selma gate team that puts the number in writing. Free estimates, same-day response for repairs, no surprises on the invoice.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Selma and the Central Valley since 2009.