Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Tequesta
Electric gate repair in Tequesta usually means one of three things: a gate opener that’s stopped responding, a gate that’s binding or sagging on its hinges, or a safety sensor that keeps reversing the gate for no obvious reason. Most of the repairs we handle in Tequesta run between $180 and $650 before parts, and we can typically have a technician at your door the same day you call. Calder Gate Repair is the dedicated gate repair specialist inside the Relay Home Co. family, and we answer the phone with a live person 24/7 at (903) 417-0793.
Why Calder Gate Repair Is Tequesta’s Preferred Electric Gate Repair Company
Tequesta isn’t a place where a gate can limp along for weeks. Homes here sit on a narrow coastal ridge between the Loxahatchee River and the Atlantic, and that geography shows up in very specific ways on gate hardware. We know the failure patterns here because we work here. The salt air off the ocean accelerates corrosion on control boards and low-voltage terminals in ways you just don’t see a few miles inland in Palm Beach Gardens or Jupiter. When a Tequesta gate starts acting up, we start by looking at what the coast has been doing to it.
Our technicians are background-checked, uniformed, and dispatched with a live, trackable arrival time. You’ll know who’s coming and when, not a four-hour window and a hope. Every job includes a written price before any work starts, and every repair carries the 365-Day Done Right Promise: if the repair fails within a year, Calder returns at no charge. That’s stated in writing, on every job, every time.
Nico Alvarez leads our team, and the standard he set is simple: answer the phone with a human, price the job before you touch a tool, and stand behind the work for a full year. That’s the Electric Gate Repair approach we bring to every driveway on Riverside Drive, County Line Road, and the village streets around Old Dixie Highway.
Electric Gate Motor in Tequesta
Electric Gate Motor work in Tequesta is the most common repair call we handle, and it’s rarely as simple as swapping a dead motor. A gate motor here lives in salt-laden air, and that changes where the failures happen. In Tequesta, we regularly find motors that test fine on the bench but have corroded low-voltage terminals on the control board feeding the loop detector and safety photocells. The motor isn’t dead; the signal path is. We meter the supply, clean or replace the corroded terminals, reseal the low-voltage side, and only then decide whether the motor itself needs replacement.
Most motor repairs in Tequesta run $220 to $480 before parts. A full motor and control board replacement on a swing gate typically lands between $850 and $1,400 depending on brand and gate weight. We’re factory-familiar with Linear, Viking, Ghost Controls, and DoorKing, which covers most of what we see on drives throughout Tequesta. The written quote you get before we start is the number on the invoice when we finish.
Motor Diagnosis and Replacement
We open the operator housing and inspect the capacitor, contactor, and low-voltage terminals before recommending replacement. On coastal Tequesta properties, a motor that tests dead is often a capacitor that died from heat and corrosion, which is a $90 to $180 repair, not a $600 motor swap. We show you what we found and the reading we took. You approve the written price before any part is ordered or any bolt is turned.
Slide Gate Motor and Rack Alignment
Slide gates on rack and pinion drives need the gate to sit level and the rack teeth to mesh cleanly with the pinion gear. In Tequesta’s older neighborhoods, gate posts shift over years of river-influenced ground movement, and that binds the drive and overloads the motor until it trips. We correct the sag at the post, shim the rack, and reset travel limits before declaring the motor at fault.
Gate Access Control in Tequesta
Gate Access Control in Tequesta covers keypads, remote controls, loop detectors, and the safety photoeyes that keep a gate from closing on a car or a person. Along the coast, the entry keypad is often the first component to fail because its membrane and internal contacts sit in that same salt air. A keypad that works intermittently, or needs heavy presses to register, is a classic Tequesta access control symptom. We replace keypads, remotes, and safety sensors, and we reprogram them on-site so everything pairs correctly the first time.
Remote control and keypad repairs in Tequesta generally run $120 to $275 including the part and programming. Safety sensor replacement, including alignment and testing, typically runs $150 to $300. Access control upgrades, like a new keypad entry system or a full loop detector replacement, range from $350 to $800 depending on the hardware and how much of the low-voltage wiring has been degraded by coastal corrosion. The price is written before we start, and it doesn’t change at the door.
Keypad and Remote Repair
We decode the symptom first. A keypad that works but won’t trigger the gate usually points to a failed relay on the control board or corroded terminals behind the keypad, not the keypad itself. We test the circuit path before replacing parts, which keeps Tequesta owners from paying for a new keypad when the real problem is seventy dollars of wiring repair.
Safety Sensor and Loop Detector Work
Safety edges and photoeyes are the non-negotiable layer of protection on any electric gate. If a photoeye is fogged with salt residue or a loop detector in the driveway has a corroded terminal, the gate may refuse to close or reverse mid-travel. We clean, test, and where needed replace these components, then run the full reversal test before we call the job done.
Trusted Brands We Service in Tequesta
We work on the brands Tequesta homeowners actually have installed. Linear and DoorKing are the two we see most on swing and slide gates in the village, and we stock common parts for both so a repair doesn’t stall waiting on a parts truck. Viking and Ghost Controls show up frequently on newer residential installations in the neighborhoods around Tequesta Drive and Country Club Drive, and we’re factory-familiar with their control boards and wireless receivers. When a control board fails from salt corrosion, we can usually source a replacement locally and have your gate running again within a day or two, not a week.
Common Electric Gate Repair Problems We See in Tequesta Homes
- Corroded control boards and low-voltage terminals. Tequesta’s onshore Atlantic air works its way into operator housings and attacks the low-voltage side of the board: the terminals feeding loop detectors, safety photocells, and keypad relays. The symptom is erratic open/close behavior or a keypad that stops responding entirely, and the fix is cleaning, resealing, and replacing the corroded terminal blocks.
- Sagging swing gate leaves failing at the hinge post. River-influenced humidity and shifting ground move gate posts over time. The leaf drops, the operator has to work against the sag, and eventually the motor trips or the gate binds mid-travel. We correct the post alignment and shim the hinge before the operator burns out.
- Wet-season power and grounding nuisance trips. Tequesta’s summer storms stress older neighborhood electrical service, and slide gate drives on rack and pinion setups can trip their overloads during voltage dips. Once we meter the supply and check the grounding at the post footing, we often find the motor is fine and the real fix is a grounding repair or a surge suppressor on the operator circuit.
- Safety sensors false-triggering from salt haze. Photoeye lenses film over with salt residue, and the gate reverses when nothing is actually in the path. A simple clean and realign fixes this in most cases, but if the sensor housing itself is corroded, replacement is the honest call. Both are quick, and both are priced before we start.
Pricing for Electric Gate Repair in Tequesta, FL
A typical gate motor repair in Tequesta runs $220 to $480 before parts. Keypad or remote replacement runs $120 to $275. Safety sensor work runs $150 to $300. A full swing gate motor and control board replacement typically lands between $850 and $1,400. These are the numbers we quote in Tequesta, and the quote you approve is the price on the invoice. We don’t add dispatch fees or “environmental” surcharges at the end. The estimate is free, and we’ll walk the gate with you before we quote so you see exactly what we’re recommending and why. Call (903) 417-0793 and a live person will schedule the visit.
We Also Serve Cities Near Tequesta
Tequesta is our home ground for coastal gate work, but we run technicians to the surrounding area regularly. Calder Gate Repair handles Electric Gate Repair in Tequesta and serves Jacksonville, Miami, Tampa, and Orlando with the same written-price guarantee and 365-Day Done Right Promise. If you’re outside the village but still need a gate specialist, call and we’ll confirm coverage for your address.
Serving Tequesta, FL - Our Local Coverage Area
We’re based in the Tequesta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Tequesta
In Tequesta, the most common cause of a gate reversing mid-travel is a safety photoeye that’s fogged with salt haze or slightly misaligned, which makes the operator think something is in the path. Close behind is a sagging gate leaf that binds the operator and triggers the motor’s overload protection. We test the sensors and meter the motor draw on-site, and most of these repairs run $150 to $300. Call (903) 417-0793 and we’ll diagnose it in one visit.
A proper installation in Tequesta starts with the ground: level, compacted footings at the posts, with the gate hung so it sits square and the hinges aren’t fighting the weight. From there, the operator gets a dedicated, properly grounded power run sized for the motor’s draw, not a spliced outdoor extension cord. Safety edges and photoeyes get installed and the reversal force gets tested, because an untested gate is a hazard. We also seal the operator housing and low-voltage terminals against coastal air. A full install takes measured time, not same-day promises; we quote it in writing before any work starts.
Tequesta sits on a coastal ridge between the Loxahatchee River and the Atlantic, so onshore air carries salt that corrodes control boards, contactors, and low-voltage terminals much faster than a few miles inland. The symptom is usually erratic open/close behavior, a dead keypad, or a gate that stops responding to remotes. What helps is periodic rinsing of the gate and operator housing with fresh water, keeping weep holes clear, and having the low-voltage terminals cleaned and resealed every year or two. We include a corrosion inspection on every Tequesta repair visit, and we’ll tell you honestly what your specific operator needs.
Almost certainly yes. We’re factory-familiar with Linear, Viking, Ghost Controls, and DoorKing, which covers the vast majority of what’s installed on Tequesta drives. We also work on LiftMaster, FAAC, BFT, Elite, and Mighty Mule. If you tell us the brand and model when you call, we’ll confirm parts availability before we dispatch so you’re not waiting on the day of service.
Yes, both in one visit. We correct the post alignment and shim the gate so the leaf sits level again, then realign the rack so the pinion meshes cleanly. In Tequesta’s coastal ground, this is one of the most common slide gate failures, and it’s often misdiagnosed as a motor problem. A hinge-post correction and rack realignment typically runs $300 to $600 depending on gate size and how far the post has shifted. The price is written before we start, and the repair carries the full 365-Day Done Right Promise.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family. Serving Tequesta, FL with written-price gate repair since 2009.