Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across The Woodlands
An electric gate in The Woodlands that won’t open, reverses halfway, or grinds against its track isn’t just an inconvenience. It’s a security risk and a daily frustration. We fix it fast. Calder Gate Repair sends background-checked, uniformed technicians to every village in The Woodlands, from Alden Bridge to Grogan’s Mill, with a live arrival time you can track from your phone. Most gate opener and motor repairs are completed in a single visit. Call (903) 417-0793 and a real person answers, 24/7.

Why Calder Gate Repair Is The Woodlands’s Preferred Electric Gate Repair Company
We’re part of the Relay Home Co. family, established in 2009, and each location is independently owned and operated under The Relay Visibility Guarantee. For The Woodlands homeowners, that means one thing: you know who’s coming, when they’ll arrive, and exactly what the repair costs before a single bolt is turned. Our technicians work on electric gates across The Woodlands every week, so we know the local failure patterns. We know that post footings in Panther Creek settle in clay soil. We know that original operators in Cochran’s Crossing from the 1990s burn out control boards rather than fail repair-ably. That local knowledge is what turns a two-hour diagnosis into a 40-minute fix.
Every Calder Gate Repair job in The Woodlands carries three non-negotiable guarantees. First, a written price before any work starts. Second, a written guarantee on every repair, backed by our 365-Day Done Right Promise: if the repair fails within 365 days, we return at no charge. Third, a free second visit if that repair doesn’t hold. No fine print, no “it depends later.” The number on the invoice is the number agreed to at the door.
We also answer the phone. Live. Every call, 24 hours a day, 7 days a week. Not a voicemail tree, not a chatbot. A human who can book your appointment, update your arrival window, or troubleshoot a stuck gate on the spot.
Commercial Gate Operator in The Woodlands
Commercial Gate Operator work in The Woodlands means repairing or replacing the motor, control board, and drive mechanism that power gates at community entrances, business properties, and estate driveways. A commercial operator in The Woodlands often runs hundreds of cycles per day in heat and humidity. That duty cycle wears out limit switches (the small sensors that tell the gate when to stop), capacitors, and gear sets far faster than a residential unit. Most commercial gate operator repairs run $450 – $950, while full operator replacements typically range from $1,800 – $4,200 depending on the gate’s size, weight, and whether it’s a slide or swing configuration. We quote the full job in writing before any work begins.
Operator Replacement vs. Repair
When a commercial operator in The Woodlands fails, the question is whether the motor and board are worth saving or whether the unit has reached end-of-life. We test the operator under load, check amp draw, and give you an honest answer. No upselling. If a $300 control board fixes it, that’s what we install. If the gearbox is shot and a replacement operator makes more sense long-term, we show you the numbers for both paths and let you decide.
Access Control Integration
Many commercial gates in The Woodlands tie into telephone entry systems, keypads, and vehicle loop detectors. We integrate with existing access control wiring and can add or replace safety photo-eyes and edge sensors to bring the gate into UL 325 compliance. A properly integrated gate doesn’t false-trigger after heavy rain and doesn’t dead-end a fire lane during an emergency.
Automatic Gate Repair in The Woodlands
Automatic Gate Repair in The Woodlands covers the full electric system on your gate: the motor, the control board, the remote receivers, keypads, safety sensors, and the physical hardware that carries the gate leaf. The Woodlands has thousands of automatic gates on residential driveways in villages like Sterling Ridge and Alden Bridge, and the most common calls we get are for gates that open partway and reverse, gates that won’t respond to remotes, and gates that grind or stall. Automatic gate repair typically runs $180 – $425 for limit switch, photocell, or capacitor replacement work, and $300 – $850 for motor or control board repairs, depending on the brand. We give you the exact price before we touch the gate.
Motor and Control Board Diagnosis
Most automatic gate “failures” in The Woodlands are actually two separate problems stacked together. A worn motor struggles against a gate that’s binding at the hinges or dragging on a shifted concrete pad. That overload trips the limit stops or burns a relay on the control board. We diagnose the whole system, not just the part that stopped. Fixing only the board while the gate still binds means another failure in six months.
Remote and Keypad Repairs
If your gate opens from the wall button but not the remote, the receiver board or remote programming is usually the issue. We replace and program remotes, install and sync wireless keypads, and can add a smartphone-controlled receiver to older operators. Keypad repair and replacement runs $120 – $260. Remote programming and replacement runs $90 – $180.

Trusted Brands We Service in The Woodlands
Our technicians are factory-familiar with nine leading gate opener brands, including Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. That matters in The Woodlands because the housing stock spans decades. A 1990s Viking operator in Cochran’s Crossing has very different failure points than a 2020 Ghost Controls unit in a new Sterling Ridge build. We keep common parts for DoorKing and Elite operators on our service vehicles, which means faster turnaround for most The Woodlands repairs. Call us at (903) 417-0793 for a fast diagnostic.
Common Electric Gate Repair Problems We See in The Woodlands Homes
- Post-footing settlement in clay soil. The Woodlands’ expansive clay shrinks and swells with moisture, which causes gate posts to shift over time. A gate leaf drops a few inches, binds at the latch, and overloads the operator, tripping its internal limits. The gate “fails” even though the operator is fine. We re-shim, re-level, and reset the limits.
- End-of-life original operators. Many villages like Alden Bridge, Cochran’s Crossing, and Panther Creek were built out between the 1980s and 2000s. Original swing and slide gate operators from that era are now past their rated duty cycle. Burned-out control boards and seized motors are the two most common signs. Replacement is usually the honest fix.
- Corroded safety sensor wiring after rain. The Woodlands gets heavy, frequent rainfall and high humidity. Moisture creeps into loop detector wiring and photocell lenses, causing intermittent false triggers. Your gate may open and close on its own, or refuse to close at all. We replace the corroded wiring, seal the junction boxes, and test under wet conditions.
- Skipped entrapment protection on older installs. UL 325 safety standards require photo-eyes and edge sensors on automatic gates. Many older or low-bid installations in The Woodlands skipped these entirely. We routinely find gates that are both non-compliant and dangerous. We add the missing protection and run a full reversal test before leaving.
A homeowner in Alden Bridge had a LiftMaster swing gate operator that would open halfway and then reverse. The culprit turned out to be a misaligned safety photocell combined with a sagging gate leaf that had pulled its top hinge loose. We corrected the sag at the hinge post, re-shimmed and re-leveled the panel, realigned the photo-eye, and ran a full UL 325 reversal test before leaving. The gate has run clean ever since.
Pricing for Electric Gate Repair in The Woodlands, TX
Here’s what electric gate repair in The Woodlands actually costs. Most residential motor and control board repairs run $300 – $850. Limit switch, capacitor, and photocell replacements run $180 – $425. Keypad repair and replacement runs $120 – $260. Remote programming and replacement runs $90 – $180. Commercial operator repairs run $450 – $950, and full operator replacements typically range from $1,800 – $4,200. Parts are quoted separately at cost. We write every price down before any work starts, and the number on the invoice is the number agreed to at the door. Always.
We Also Serve Cities Near The Woodlands
Calder Gate Repair provides Electric Gate Repair across the greater Houston metro. Our dedicated dispatch coordinate visits from a Houston office, with local crews serving The Woodlands directly. We also serve Houston, San Antonio, Dallas, and Fort Worth. If your gate is acting up and you’re not sure whether we cover your area, call (903) 417-0793 and we’ll tell you straight.
Serving The Woodlands, TX - Our Local Coverage Area
We’re based in the The Woodlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in The Woodlands
The most common cause is a misaligned safety photocell combined with a sagging gate leaf, often from post-footing settlement in The Woodlands’ clay soil. The photocell sees the gate leaf as an obstruction and reverses it. A second cause is a worn limit switch that stops the gate too early. We realign the photo-eye, re-level the gate panel, and reset the limits. Repair runs $180 – $425. Call (903) 417-0793 for a same-day diagnostic.
We install and repair electric gates in The Woodlands. A full automatic gate installation includes excavation and concrete post footings, the gate panel, the operator, a power run, safety photo-eyes and edge sensors, and a UL 325 reversal test. Installation is measured and scheduled. We don’t promise same-day installation. We do promise a free measure and a written price. Typical automatic gate installations in The Woodlands run $4,500 – $11,000 depending on gate width, material, and access.
We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our techs carry common parts for DoorKing and Elite operators on the truck. If you have an older Viking or a newer Ghost Controls unit in The Woodlands, we can diagnose and repair it. Call (903) 417-0793 and tell us what’s on your gate.
Usually it’s a post problem. The Woodlands sits on expansive clay soil that shifts with moisture changes, and gate post footings settle over time. A settled post drops the gate leaf, which binds and overloads the operator. We re-shim the post, re-level the panel, and reset the operator limits. We also check whether the post needs to be re-set in new concrete.
UL 325 standards require automatic gates to have two independent forms of entrapment protection: primary (photo-eyes) and secondary (edge sensors or an inherent reversing mechanism). Many older The Woodlands gates lack one or both. If your gate doesn’t reverse on contact or has no visible photo-eye, it’s non-compliant and unsafe. We can bring any gate up to current UL 325 standards. A reversal test takes minutes, and it’s part of every Calder Gate Repair visit.
If your electric gate in The Woodlands is acting up, call Calder Gate Repair at (903) 417-0793. We answer live, 24/7. You get a written price before any work starts, a written guarantee on every repair, and a free second visit if the fix doesn’t hold. That’s the Calder standard, and it’s part of every job we do in The Woodlands.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving The Woodlands with electric gate repair since 2009.





Before
After
Before
After
Before
After