Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Windcrest
When your electric gate stops opening in Windcrest, you need a fix that actually holds. Most gate opener repairs in this area run $180 – $390 before parts, depending on whether we’re replacing a limit switch, a control board, or a stripped gear. Calder Gate Repair dispatches background-checked, uniformed technicians to Windcrest with a live arrival time you can track from your phone. Call (903) 417-0793 and a real person answers, 24/7.
Windcrest’s mid-century homes sit on expansive clay soil, and that single fact explains a lot of the gate failures we see. Operators get blamed for what’s really a structural problem: a hinge post that’s worked loose over forty years of wet-dry cycles. Our Electric Gate Repair team knows the difference, and we quote the fix, not a band-aid.
Why Calder Gate Repair Is Windcrest’s Preferred Electric Gate Repair Company
We show up when we say we will. Our dispatch comes from the brand’s San Antonio office, but the crews serving Electric Gate Repair in Windcrest know this city’s streets: Crestway, Midcrown, and the gated enclaves off Eisenhauer. That local familiarity means we don’t waste a visit figuring out where your gate’s junction box sits.
Every job carries the 365-Day Done Right Promise. If a repair fails within a year, we return at no charge, and that’s in writing before we touch a single bolt. The Relay Visibility Guarantee means you get a trackable arrival time, before-and-after photos, and a digital invoice you pay from a link. No clipboard, no vague window, no phone tag.
Nico Alvarez runs Calder Gate Repair as part of the Relay Home Co. family, established 2009. Nico trained the team on nine opener brands because Windcrest homeowners own everything from 25-year-old Linear units to current Ghost Controls hardware. When a tech walks your driveway, they’ve already worked on your brand.
Gate Access Control in Windcrest
Gate Access Control is about who gets in and when, and in Windcrest it usually means a keypad, a remote, and a safety system that all talk to the operator. For most Windcrest homes, a full access control upgrade – keypad plus two to three remotes plus wiring and programming – runs $650 – $1,400. Some lots need a loop detector or an intercom. We’ll tell you exactly what your gate needs, not what a catalog says it could use.
Keypads and remotes done right
Older Windcrest keypads fail slowly. The buttons get mushy, the code clears, or water seeps in through a cracked faceplate. Replacing a keypad usually runs $150 – $350 installed. We pair it, test range from the street, and walk you through adding a code for the lawn crew rather than handing them the master PIN.
Safety edges and photo-eyes
If your gate rolls or swings without photo-eyes, it is not up to current UL 325 entrapment protection standards. Most Windcrest gates built before about 2010 lack them. Adding a photo-eye pair plus a safety edge typically runs $300 – $650. It’s the one upgrade we refuse to skip on any install or major repair.
Commercial Gate Operator in Windcrest
A Commercial Gate Operator serving a Windcrest property is a different machine than a residential unit: heavier motor, higher duty cycle, and a requirement for real entrapment protection. On this side of the business, a new commercial operator with controls and safety hardware usually starts around $2,200 and can reach $6,500 for a full slide-gate package with new rack, new base plate, and loop detectors.
What a real install includes
We don’t just bolt a motor to a rail and leave. A proper commercial operator installation in Windcrest means a dedicated 120V circuit run to the gate line, a concrete pad or steel base plate sized for the operator, safety photo-eyes on both sides, and reversal testing logged for UL 325 compliance. We also verify the gate itself rolls freely first. Putting a new operator on a gate that binds is how you void the warranty and buy the same repair twice.
When a commercial operator fails
Most commercial failures we see in Windcrest are thermal overload trips, not dead motors. The operator overheats because the gate drifts out of level, the rack gets chewed, and the motor pulls twice the current it should. We fix the mechanical cause first, then address the electronics. A service call for a tripping or stuck commercial operator runs $225 – $450 before parts, and we quote the parts before we order them.
Trusted Brands We Service in Windcrest
We work on the operators Windcrest homes actually have. Linear and DoorKing units from the 90s are everywhere in the older neighborhoods off Midcrown, and newer builds lean toward Viking and Ghost Controls. We keep common repair parts on the trucks for all four, so a blown DoorKing control board is often a same-visit fix rather than a one-week wait on a freight shipment.
Common Electric Gate Repair Problems We See in Windcrest Homes
- Swing gate sag at the hinge post. Windcrest’s expansive clay heaves with rain and shrinks in drought, and most original post footings weren’t set deep enough for it. The panel drops, the operator arm binds, and swapping the operator just hides the problem for six months.
- Slide gate stalling halfway. When a gate drifts out of level, the rack and pinion wear unevenly and the motor over-amps. The operator trips on thermal overload, which looks like an electronics failure but is really a geometry problem.
- Exposed low-voltage cable. Many older Windcrest driveways never had conduit run to the gate line, so keypad and sensor wire sits exposed. It works fine until a hard freeze or a lawn crew finds it.
- Control board burnout after storms. Central Texas lightning and spring storm surges take out boards on older Linear and DoorKing units. We keep replacements stocked for quick turnaround in Windcrest.
Pricing for Electric Gate Repair in Windcrest, TX
We quote in ranges because the first five minutes of diagnosis change the number. A limit switch runs $120 – $180. A control board replacement runs $350 – $700. A full operator swap runs $900 – $1,600 for residential, including the motor, installation, and safety checks. The price we give you before work starts is the price on the invoice. If a repair fails within 365 days, we come back free. Call (903) 417-0793 for a free estimate, and we’ll put the number in writing before any work begins.
We Also Serve Cities Near Windcrest
Beyond Windcrest, our crews cover gate repair calls in Houston, San Antonio, Dallas, and Fort Worth. If your property sits in one of those metros and the gate won’t budge, you get the same written-price rule and the same 365-Day Done Right Promise.
Serving Windcrest, TX - Our Local Coverage Area
We’re based in the Windcrest area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Windcrest
The sag is almost never the operator’s fault. In Windcrest, the original hinge post footing was typically set shallow in expansive clay, so the post leans and the gate panel drops over time. The operator then fights a misaligned gate and burns out faster. We fix the footing and re-hang the gate before we touch the motor, otherwise you’re buying the same repair twice. Call (903) 417-0793 and we’ll assess whether your sag is structural or mechanical.
A real install includes a dedicated 120V circuit run to the gate line, a correctly sized operator, safety photo-eyes and a safety edge, a base plate or pad for the operator, and reversal testing documented for UL 325. Most Windcrest gates from the mid-century build never got a dedicated power run, so a quote that skips electrical work is leaving out the part that actually makes the gate run. We price the full job before we start, not after we discover the outlet is on the wrong side of the yard.
No, and you shouldn’t want a company that says yes. A new operator install is measured and scheduled: we need to check the gate’s weight, the hinge condition, the power situation, and the safety hardware. Most Windcrest installs are booked within a few days of the free measure, and we give you a written price before the work begins. Repairs, on the other hand, we can often handle the same day you call.
Yes. Photo-eyes are entrapment protection required by UL 325, and a gate without them can pinch or strike a person, a pet, or a car. Older Windcrest gates frequently lack them. We add a photo-eye pair and test reversal force on every install and most major repairs, and it’s typically a $300 – $650 add-on. For the exact number on your gate, call (903) 417-0793.
We service Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule, which covers nearly every operator a Windcrest homeowner is likely to own. We also install and repair solar-powered operators for gates where running a 120V line isn’t practical. Solar systems cost more upfront, roughly $1,400 – $2,800 installed depending on panel, battery, and operator size, but they skip the electrical trenching cost entirely. Call (903) 417-0793 and we’ll tell you which path makes sense for your lot.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Windcrest and the surrounding metro.