Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across Yulee
An electric gate that won’t open on a rainy Yulee morning isn’t a small annoyance. It’s a car stuck in the driveway, a delivery left at the road, and a security gap on your property line. Calder Gate Repair fixes electric gate openers, motors, keypads, sensors, and control boards across Yulee, FL, and we do it with a written price before any bolt comes off. Most gate opener repairs in Yulee run $210 to $460 including the service call and labor before major parts. Call (903) 417-0793 and a live person answers, day or night, to get a technician rolling toward Yulee with a trackable arrival time.

Why Calder Gate Repair Is Yulee’s Preferred Electric Gate Repair Company
Yulee homeowners call us because we don’t make them wait on a four-hour window. When you book with Calder Gate Repair, you get a background-checked, uniformed technician dispatched with a live arrival time you can follow from your phone. That’s the Relay Standard, and it applies to every job we run in Yulee, from a keypad replacement off Pages Dairy Road to a full gate motor rebuild near the Wildlight community.
We’re part of the Relay Home Co. family, founded in 2009, and every Calder location is independently owned and operated under the same guarantees. Yulee customers get the 365-Day Done Right Promise: if the repair fails within a full year, Calder returns at no charge. Not a prorated credit. Not a “we’ll take a look.” A second visit, free, in writing on every job.
Our techs are factory-familiar with the brands you actually see on Nassau County properties: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Yulee gate stalls halfway, we usually know the cause before we pull into your driveway because we work these openers every week.
Electric Gate Motor in Yulee
An electric gate motor in Yulee works against conditions most opener manuals don’t anticipate: sandy soil, high water tables, coastal humidity, and long driveway runs where the operator sits far from the house. When the motor fails, the gate usually won’t move at all, or it groans and crawls a few inches before tripping. A motor replacement in Yulee typically runs $380 to $780 depending on the horsepower, swing versus slide setup, and whether we’re replacing the arm, the capacitor, or the entire operator head.
Swing Gate Motor Replacement
Swing gates dominate residential Yulee, and the motor is the workhorse. If the hinge post has settled in sandy soil, even a new motor will strain and burn out early. We check the post, the leaf alignment, and the travel limits before we install a new motor, because a motor swap without checking the mechanicals is a temporary fix.
Slide Gate Operator Repair
Slide gates are common on larger Yulee lots and small equestrian properties. The motor here drives a chain or rack, and if the track has filled with sand or pine litter, the operator overworks until the board trips or the capacitor fails. Slide gate motor repairs in Yulee run $320 to $680, and we clean and align the track as part of the job.
Gate Access Control in Yulee
Gate access control in Yulee covers more than the keypad: it’s the keypad, the remote receivers, the loop detectors, the intercom, and the control board that ties them together. When a gate ignores a keypress or opens on its own after a coastal storm, the access control system is usually the culprit. Keypad replacement in Yulee runs $140 to $280, while a new control board runs $230 to $520 installed, depending on brand and whether we’re programming new remotes at the same time.
Keypad and Remote Programming
Yulee homeowners with rental properties or frequent guests rely on keypads more than remote-only systems. We program new codes, add and delete remote fobs, and sync everything to the opener on the spot. If the keypad itself has failed, we replace it with a brand-matched unit so your existing remotes keep working.

Loop Detector and Safety Sensor Service
After a heavy rain or storm surge along the Nassau River, loop detectors buried in the driveway can take on water and trigger phantom opens. Safety photocells get knocked out of alignment at the same time, leaving the gate unsafe to operate around kids and pets. We test, re-align, and replace these sensors, and we always verify UL 325 entrapment protection before calling the job done.
Trusted Brands We Service in Yulee
Yulee homeowners run a mix of older FAAC hydraulic operators on long-established lots and newer BFT, Linear, and Viking units on recently built homes. Our techs are trained on all of them, and we carry common boards, remotes, photocells, and capacitors for these brands in our service vehicles. That means fewer parts runs across the St. Marys River and faster repairs for you. We also work on LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you aren’t sure what brand sits at your gate line, describe the keypad or snap a photo when you call. We’ll identify it from the truck.
Common Electric Gate Repair Problems We See in Yulee Homes
- Corroded splices in buried low-voltage wire: Yulee’s sandy, moist soil accelerates corrosion at wire splices. The result is a gate operator that browns out and stalls mid-travel even though the battery tests fine. Our techs re-splice with gel-filled junction boxes and heat-shrink to stop repeat failures.
- Hinge post settling and gate leaf drag: High water tables and sandy soil under Yulee driveways let footings shift over time. A sagging swing gate drags on the ground, overloads the motor, and eventually burns it out. We re-plumb the hinge post and re-set the leaf before the motor takes more damage.
- Waterlogged keypads and loop detectors: Coastal rain and storm surge push water into entry pedestals and buried detector loops. You’ll see phantom gate openings, unresponsive keypads, or a gate that closes on its own. We dry, seal, and replace these components as needed.
- Misaligned safety photocells: Storms, wind, and settling shift the small eye sensors at each side of the gate opening. The gate may refuse to move or reverse for no reason. Alignment takes minutes, and we include it with every full electric gate repair we run in Yulee.
Pricing for Electric Gate Repair in Yulee, FL
Here’s what Yulee homeowners can expect. Service call and diagnostic: $65 to $95, waived with repair. Gate opener board replacement: $230 to $520. Motor replacement: $380 to $780. Keypad replacement: $140 to $280. Remote programming (per remote): $35 to $70. Safety sensor replacement: $90 to $180 per pair. Control board diagnostics and repair: $180 to $400. The price you approve before work starts is the price you pay. Every Calder Gate Repair job includes a written estimate, a written guarantee, and the 365-Day Done Right Promise. Call (903) 417-0793 for a free, no-pressure quote over the phone.
We Also Serve Cities Near Yulee
Our electric gate repair team covers Yulee and the surrounding Nassau County and Jacksonville metro area, including Electric Gate Repair in Yulee along with Fernandina Beach, Atlantic Beach, Jacksonville, and Neptune Beach. If your property sits near the county line or along A1A, we’re already in the area. For full details on what we fix, see our Electric Gate Repair service page.
Serving Yulee, FL - Our Local Coverage Area
We’re based in the Yulee area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Yulee
A mid-travel stall usually means the gate operator is being starved for power, not that the battery failed. On long Yulee driveways off US-17 and Chester Road, the buried low-voltage run from the house often has corroded splices. The board sees low voltage, the gate crawls, and the safety system stops the cycle. We test the full circuit, not just the battery, and re-splice where needed. Call (903) 417-0793 for a diagnosis that looks at the whole run, not just the operator.
No. New gate installations in Yulee are measured, ordered, and scheduled. A proper install includes groundworks, power run, operator mounting, safety edges, and entrapment reversal testing. Expect a written quote after we survey your gate opening, posts, power access, and soil. We’ll give you a clear timeline and a fixed price before any work begins. Call (903) 417-0793 to schedule a free measure and written estimate.
Usually both, and in Yulee the root cause is often the hinge post settling in sandy soil. The sag adds drag, the drag overloads the motor, and the motor burns out. If you replace only the motor, the new one will fail the same way. We re-plumb the post, re-hang the leaf, and then address the operator. That’s how we fix it once. Call (903) 417-0793 and ask for a full mechanical check with the motor repair.
We service FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our techs are trained on all nine brands and carry common parts for Yulee jobs in the truck, which shortens repair time. If your gate is an older FAAC hydraulic or a newer BFT or Linear unit, we can identify it and quote the repair by phone or photo. Call (903) 417-0793 and describe what you see.
You can test the photocells by blocking the beam while the gate is closing. It should reverse immediately. The same applies to the edge sensor: apply firm hand pressure to the safety edge while the gate closes, and it should reverse. We run these tests with a calibrated force meter on every Yulee repair to confirm UL 325 compliance. If you want a professional entrapment test with your repair, call (903) 417-0793, and we’ll include it.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Yulee and Nassau County since the Relay Home Co. network was founded in 2009.





Before
After
Before
After
Before
After