Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Opener Repair Across Burbank
Gate opener repair in Burbank typically runs between $185 and $420 before parts, and most common failures are diagnosed and fixed in a single visit. We cover every neighborhood from the Rancho to Magnolia Park, and we answer the phone with a live person around the clock at (903) 417-0793. If your gate won’t open, won’t close, or reverses on its own, Calder Gate Repair gets a background-checked technician to your driveway with a real arrival time you can track.
Burbank’s mix of older Rancho-adjacent properties and hillside homes means we see failure patterns here that don’t show up in newer suburban tracts. Settled hinge posts, heat-stressed control boards, and misaligned safety photocells are everyday calls for us. We know Burbank gates, and we know what they cost to fix before we touch a bolt.
Why Calder Gate Repair Is Burbank’s Preferred Gate Opener Repair Company
Burbank homeowners call us because we put the price in writing before any work starts. Not a ballpark. Not a “we’ll see when we get there.” The number on your invoice is the number you approved at the door, and every repair carries our 365-Day Done Right Promise in writing. If the repair fails within 365 days, Calder returns at no charge. That’s not a sales line. It’s on every job sheet.
We’re part of the Relay Home Co. family, established 2009, and each location is independently owned and operated under The Relay Visibility Guarantee. That means when you book, you get a live, trackable arrival time, before-and-after photos of the work, and a digital invoice you can pay from a link. No vague four-hour windows. No phone tag. No wondering who’s showing up.
Our dispatchers coordinate Burbank jobs from the brand’s Los Angeles office, which puts crews in Burbank quickly when a gate fails. Technicians arrive in uniform, background-checked, and factory-familiar with nine major brands, including Viking, Ghost Controls, DoorKing, and Elite. For Burbank specifically, that means we show up already knowing what’s likely inside your operator housing.
Gate Opener With Keypad in Burbank
A gate opener with keypad in Burbank lets you punch in a code instead of reaching for a remote, and repairs or upgrades to keypad entry typically run $150 to $350 when paired with an existing operator. Many Burbank homeowners ask us to add keypad access after losing a remote or after a delivery driver can’t get in. A wired keypad near the curb is the most common request, and it installs faster than most people expect.
Keypad Wiring and Code Reset
If your keypad lights up but won’t open the gate, the issue is usually a corroded wire splice or a control board that’s lost its stored codes. We trace the run, replace damaged splices, and reprogram codes on the spot. Burbank’s inland sun cooks exposed wire jackets over time, so we use sealed connectors when we redo any exterior splice.
Adding Keypad Entry to an Existing Gate
Older operators without a keypad port can still take a standalone receiver that matches your brand. We’ll confirm compatibility with your existing control board, mount the keypad, and walk you through setting your own code before we leave. Burbank homeowners who add a keypad often do it the same week they add a loop detector, since both jobs share the same low-voltage trench path.
Gate Operator in Burbank
A gate operator in Burbank is the motor and control unit that physically moves your gate, and full replacements with labor start around $1,450 for a basic swing unit and run up from there based on gate weight, brand, and site conditions. Replacement is a measured, ordered, and scheduled job, not a same-day fix. We’ll quote the operator, the arm, and the required safety edges in writing before anything is ordered.
Operator Replacement With Safety Compliance
Any new operator installed in Burbank must comply with UL 325 entrapment protection requirements. That means properly installed and tested safety photocells or contact edges, plus reversal testing to confirm the gate stops and reverses with limited force. We test every install twice: once on the bench and once after final mounting and travel limit adjustment.
Groundworks and Post Assessment
When a Burbank gate operator fails repeatedly, the problem often starts at the hinge post, not inside the operator housing. Before we mount a new unit, we check the post for settlement and square, and we’ll tell you honestly whether new concrete footings are needed. Mounting a new operator on a shifting post just means you’ll be paying for the same repair again in six months.
Trusted Brands We Service in Burbank
We stock common repair parts for Viking, Ghost Controls, DoorKing, and Elite operators, which means Burbank customers aren’t waiting a week for a limit switch or a control board to ship from a warehouse out of state. Our techs train on these brands quarterly, and when a DoorKing swing arm or a Ghost Controls receiver needs a board swap, it’s a job we’ve done many times. If your gate is a different brand, call and tell us what’s on the operator tag. There’s a good chance we know it too, and we’ll confirm before we dispatch.
Common Gate Opener Repair Problems We See in Burbank Homes
- Operator runs but the gate stalls or reverses. In Burbank’s older Rancho-adjacent and Magnolia Park properties, this usually traces back to a settled hinge post that has pulled the gate out of alignment. The operator is working; the gate is fighting the frame.
- Control board or limit switch faults from inland heat cycling. Burbank sees long stretches of summer heat that bake operator housings, especially older LiftMaster and Linear units mounted in direct sun. Thermal stress cracks solder joints and shifts limit settings over time.
- Safety photocell and loop detector nuisance reversals. Moisture and debris collect in driveway paths after Burbank’s seasonal rain, and photocells get dirty or knocked out of alignment. The result is a gate that reverses for no reason the homeowner can see.
- Remote range dropping to almost nothing. Hillside properties above Olive Avenue often have gate operators that lose signal because the receiver antenna is blocked by terrain or stucco-and-mesh construction. A relocated or upgraded antenna fixes most of these calls.
Pricing for Gate Opener Repair in Burbank, CA
Most gate opener repairs in Burbank run $185 to $420 before parts. A typical limit switch or photocell replacement lands around $190 to $280. Control board replacements are the big-ticket item, usually $300 to $550 with programming. Full operator replacements start near $1,450 and climb with gate weight and brand. The quote we give you before work starts includes all labor and parts, so there’s no surprise line item after the fact. Estimates are free, and we never start a job until you’ve approved a written number. Call (903) 417-0793 for a quote on your specific gate.
We Also Serve Cities Near Burbank
Beyond Burbank, our crews cover Glendale, West Hollywood, Altadena, and Beverly Hills. If you’re a few minutes outside city limits, our Gate Opener Repair team handles the same brands and carries the same written guarantees.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Opener Repair in Burbank
The motor is running but the gate isn’t moving, which in Burbank’s older neighborhoods almost always means a shifted hinge post or a broken drive arm linkage, not a dead operator. The motor is trying to push a gate that’s bound against its frame. We reset the gate, correct the sag, and re-level the arm geometry before testing the safety reversal. We were called to a Magnolia Park home where a LiftMaster operator did exactly this: the hinge post had settled, pulling the frame out of square, so we reset the post, corrected the sag, and re-levelled the arm before re-testing the photocell and UL 325 reversal. The fix held because we addressed the post, not just the operator. Call (903) 417-0793 if your gate is doing the same, and we’ll diagnose it before quoting anything.
Yes, and this is legally required, not optional. Any gate opener installed in Burbank must comply with UL 325, which means working safety photocells or contact edges and a functioning auto-reverse that stops and reverses the gate with limited force. It’s also a real safety issue: a closing gate can seriously injure a child or pet. We test entrapment protection on every visit, even when the customer only asked for a remote fix. If your gate doesn’t reverse when it hits resistance, call (903) 417-0793. That’s a repair you want done today, not next week.
Most common Burbank gate opener repairs are finished in one to two hours on site. A limit switch, photocell alignment, or keypad reprogram is usually a single-visit job. Control board swaps run longer because programming and travel limit calibration are involved. Full operator replacements are scheduled, not same-day, because the unit is ordered for your gate’s exact size and weight. When you book, we’ll give you a realistic time window and a real arrival time, not a four-hour range. Call (903) 417-0793 and tell us what the gate is doing, and we’ll tell you what the repair timeline looks like.
Our Burbank crews are factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers nearly every opener a homeowner in the 91501, 91504, 91505, 91506, and 91502 zip codes is likely to own. We stock common parts for Viking, Ghost Controls, DoorKing, and Elite, which speeds up repairs for those brands significantly. If you don’t see your brand, call (903) 417-0793 and read us the tag on the operator. If we can’t service it, we’ll say so before we dispatch.
Yes, and both are common upgrades for Burbank homes. A wired keypad near the driveway runs about $150 to $350 when paired with your existing operator. A loop detector, which opens the gate automatically when a vehicle pulls up, typically adds $250 to $450 with installation and is often installed at the same time since both share a low-voltage trench path. We’ll confirm compatibility with your control board before quoting. Estimates are free, and the written price you approve is the price you pay. Call (903) 417-0793 to schedule an assessment.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Burbank and the surrounding areas.