Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Opener Repair Across Colleyville
When a gate opener stops working in Colleyville, you don’t have time to wait around for a vague four-hour service window. Calder Gate Repair dispatches background-checked, uniformed technicians to Colleyville driveways with a live, trackable arrival time, and every repair comes with a written price before work starts. Most opener faults we see in this part of Tarrant County are electrical rather than mechanical, which means they’re usually fixable in one visit. If your gate is stuck, beeping, or reversing on its own, call (903) 417-0793 and a real person answers, day or night.
Why Calder Gate Repair Is Colleyville’s Preferred Gate Opener Repair Company
Calder Gate Repair is the dedicated gate repair specialist inside the Relay Home Co. family, founded in 2009 and independently owned. Colleyville homeowners call us because we train specifically on the brands installed across this area, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite, and because our techs arrive knowing the failure patterns common to gated properties along Glade Road, Pleasant Run Road, and the private-lane entries branching off Highway 26.
Beyond the multi-brand training, every Colleyville job carries three written guarantees that go on the invoice before the work begins: a written price before any bolt is turned, a written guarantee on the repair, and a free second visit if that repair fails within the 365-Day Done Right Promise window. That’s the Relay Standard, and it means you’ll get before-and-after photos and a digital invoice you can pay from a link, not a paper ticket left on the windshield.
Owner Nico Alvarez set the service standard from day one: live arrival time, not a four-hour window; a human on the phone 24/7, never a chat bot; and a tech who can explain what’s wrong in plain English before touching a screwdriver. That’s the experience Colleyville stays on the phone to book.
Gate Intercom in Colleyville
Gate Intercom repair in Colleyville usually means restoring the voice path and relay output that lets a visitor call the house and get buzzed in, and the most common fault we trace on these systems is a failed low-voltage run or a water-damaged intercom station at the gate post. Colleyville properties with long driveway runs off Glade Road and Highway 26 often have intercom cable buried alongside the main operator feed, and when that cable degrades or gets hit by a lawn crew, the intercom goes dead while the gate itself still cycles. Most Gate Intercom repairs in Colleyville run $180 – $340 before parts, depending on whether we’re reterminating a cable, replacing a corroded station, or swapping the intercom module.
Why intercoms fail on longer lots
On gated driveways that sit back from the street, the intercom shares conduit with the opener’s control wiring. Colleyville’s clay-heavy soil shifts with wet and dry cycles, and over a decade or more that movement can stress underground splices. We isolate the run with a toner, find the bad section, and splice with sealed, direct-burial connectors rather than wrapping it in tape and hoping.
What a repair actually includes
We don’t just replace a station and leave. Each Gate Intercom repair ends with a full end-to-end test: call from the keypad, voice path both directions, relay click at the operator, and a visual check of the gate’s safety edges while the intercom is triggering the opener. The price is written before we start, so you’ll know the number on the invoice matched the quote at the door.
Gate Opener With Keypad in Colleyville
Gate Opener With Keypad issues in Colleyville fall into two buckets: the keypad itself has failed, or the keypad is fine and the control board isn’t accepting the relay input, and we diagnose both before recommending parts. Private-lane properties off Pleasant Run Road and Cheek-Sparger Road often run the keypad cable in the same trench as the opener feed, so when one fails from a nicked line or lightning surge, both can act up. A keypad-specific repair or replacement on a Colleyville gate typically runs $150 – $275, and if the board is also damaged from a surge, expect $220 – $400 installed for that component.
Keypad replacement vs. board repair
We test the keypad as a stand-alone device before touching the operator. A keypad that lights but won’t open the gate is usually a wiring or programming fault; a keypad that’s completely dead is often a cut cable or a lightning strike. Either way, we’ll tell you which one it is, write it down, and replace only what’s actually failed.
Reprogramming after a repair
When we finish a Gate Opener With Keypad repair, we walk through codes with you on-site: setting a new primary code, clearing old ones, and testing the entry and exit loops so the gate doesn’t close on a car that’s still crossing the sensor line. You’ll get clear, written confirmation of what was changed, and we test the keypad with the gate under real load before we call the job done.
Trusted Brands We Service in Colleyville
We carry common parts stock for FAAC, BFT, Linear, and Viking openers, four brands we see regularly on Colleyville’s gated entries. Many of the swing-gate systems along Highway 26 and the private lanes south of Glade Road are FAAC hydraulic operators, which have a different failure mode than the Linear and Viking electromechanical units common on single-family driveway gates. Our techs are factory-familiar with all nine major brands, which means we’re not reading a manual from a phone on your driveway; we’ve diagnosed this exact fault before and we bring the right spares the first time.
Common Gate Opener Repair Problems We See in Colleyville Homes
- Voltage drop on long underground control runs. Many Colleyville gates sit 100 feet or more from the house panel, and the low-voltage cable that carries the open/close signal loses enough voltage over that distance to make the gate start, then stall or reverse. A nicked or corroded splice makes it worse, and we trace the run with a load test rather than guessing.
- Misaligned safety photocells after landscaping work. Colleyville lawns get mowed and edged weekly during the growing season, and a clipped post or set of piled clippings at the gate jams the safety beam. The gate interprets the blocked sensor as an obstacle and refuses to close or reverses mid-cycle, and the fix is usually a re-aim and a shielded mount.
- Storm-surge damage to logic boards and loop detectors. Colleyville sits in a storm-active corridor, and operators fed from outdoor sub-panels take hits when lightning grounds nearby. We regularly replace surge-damaged boards on FAAC and BFT units where the gate worked fine before a storm and died overnight.
- Intermittent cycling from degraded loop detectors. The vehicle-detection loop in the driveway tells the gate to stay open while a car is crossing. When that loop’s wire degrades or the sensitivity drifts, the gate starts closing on cars or opening for ghosts, and we retune or replace the loop to match the driveway’s size and soil conditions.
Pricing for Gate Opener Repair in Colleyville, TX
Most gate opener repairs in Colleyville run $180 – $400 before parts, with control-board replacements at the higher end and sensor re-aims or limit-switch adjustments at the lower end. If we’re splicing a damaged low-voltage run, expect $160 – $300 depending on the length and whether we’re trenching a new section or pulling through existing conduit. A full opener replacement on a larger Colleyville lot, including mounting, wiring, and safety-edge testing, typically lands between $1,200 and $2,600, and that’s a measured, scheduled job with a written quote beforehand. Every repair and replacement gets the same treatment: a written price before work starts, a written guarantee on the repair, and a free second visit if it fails within 365 days. Call (903) 417-0793 for a free estimate, and we’ll give you a real number, not a range that slides.
We Also Serve Cities Near Colleyville
Calder Gate Repair drives daily to Colleyville and the surrounding Tarrant County cities, including Bedford, Euless, Southlake, and Hurst. If you’re in one of those cities and your opener is acting up, our Gate Opener Repair team can be routed to you with the same live arrival time and written price. And for more on our local coverage, see Gate Opener Repair in Colleyville.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Opener Repair in Colleyville
The two most common causes on Colleyville properties are a blocked or misaligned safety photocell and voltage drop on the underground control cable running from the house to the operator. We diagnose by testing the sensor alignment and the cable’s voltage under load, and both problems are repairable in one visit. We were called to a home off Pleasant Run Road where a LiftMaster swing gate opened two feet and reversed; a landscaping crew had clipped the photocell post, and the control cable had been nicked by a string trimmer, dropping voltage under load. Splicing the run, re-aiming the sensor, and re-testing reversal per UL 325 got the gate cycling clean. Call (903) 417-0793 and we’ll pinpoint which failure mode you have.
Yes, all eight of those brands, plus Mighty Mule, are covered by our techs’ factory-familiar training. We see a lot of FAAC hydraulic swing operators on larger Colleyville entries and plenty of Linear and LiftMaster units on standard driveways, and we stock common parts for four of those brands locally. The specific board or sensor your unit needs will be identified during diagnosis and priced before we order or install anything.
A proper repair includes testing the full safety chain: photocell alignment, safety-edge sensitivity, reversal force per UL 325, and the vehicle-detection loop tuning. On Colleyville lots where the operator sits at the end of a long run, we also load-test the control cable and check the sub-panel’s surge protection. Swapping a board is only half the job; re-verifying that the gate won’t close on a car or a person is the other half.
Most repairs, sensor re-alignments, splice work, limit-switch adjustments, and single-board swaps, are done in 60 to 90 minutes on-site. Bigger jobs like replacing a full operator or re-trenching a long low-voltage run are scheduled separately with a written quote first. We’ll tell you the expected time window when you book, and the live arrival tracking means you’ll know when we’re actually pulling up.
Yes, and we often do. A sagging gate puts extra strain on the opener, wears hinges and limit switches faster, and can cause the same partway-open-and-reverse symptom as a sensor fault. If we find the gate itself is drooping during an opener repair, we’ll quote the hinge or wheel work separately, in writing, so you know exactly what’s included before we do anything beyond the opener repair itself. Call (903) 417-0793 to book the combined job.
If your Colleyville gate opener is acting up, whether it’s a dead keypad, a dead intercom, or a gate that stops mid-cycle, call (903) 417-0793. You’ll get a real person, a written price before work starts, and a repair backed by the 365-Day Done Right Promise.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Colleyville and the surrounding Tarrant County area.