Gate Opener Repair in Hurst - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Opener Repair Across Hurst

When your gate opener stops working in Hurst, you want a straight answer on what’s wrong, what it costs, and when someone can fix it. Most gate opener repairs in Hurst run $185 to $430 before parts, and our techs reach most Hurst neighborhoods the same day you call. Calder Gate Repair is the dedicated Gate Opener Repair team inside the Relay Home Co. family, and we know the failure patterns specific to Hurst: clay soil shifting posts, safety sensors knocked out of alignment, and keypad wiring corroded by sprinkler overspray. Call (903) 417-0793 and you’ll talk to a live person who can book a dispatch with a trackable arrival time, not a four-hour window.

Call (903) 417-0793

Why Calder Gate Repair Is Hurst’s Preferred Gate Opener Repair Company

Hurst homeowners call us because we show up when we say we will and put the price in writing before a single bolt gets turned. Every repair carries three guarantees that are never optional: a written price before work starts, a written 365-Day Done Right Promise, and a free second visit if the repair fails within that year. If the fix doesn’t hold, we come back at no charge. Full stop.

Our technicians arrive background-checked and in uniform, and you get a live arrival time you can track from your phone. No vague “sometime between noon and five.” Nico Alvarez runs the Calder Gate Repair team, and he drills one standard into every dispatch: the invoice you pay matches the number quoted at the door, always. We coordinate scheduling from our Dallas-Fort Worth office and serve Hurst locally, so response times to neighborhoods like Shady Oaks, Hurst Park Estates, and Bellaire Park are measured in hours, not days.

Gate Intercom in Hurst

Gate Intercom problems in Hurst usually trace back to the street-side post where the call box and wiring live. We replace dead intercom units, repair corroded wiring, install video intercoms that call your phone, and integrate the intercom with your existing gate operator so the open button actually opens the gate. Expect to pay $165 to $380 for intercom wiring repairs and $420 to $850 for a full intercom replacement with a video panel, depending on wire condition.

Intercom Wiring and Corrosion

North Texas rain events and sprinkler overspray are hard on low-voltage wiring at the street post. Over time, connections corrode and the intercom loses communication with the gate operator. We cut back the bad wire, re-terminate connections in sealed junction boxes, and test the full path from call button to operator board.

Video Intercom Upgrades

Some Hurst homeowners replace an aging audio-only intercom with a video unit that rings an app on their phone. The upgrade works with your existing gate operator in most cases, and we handle the wiring, mounting, and programming in one visit.

Gate Opener With Keypad in Hurst

A Gate Opener With Keypad gives you entry without a remote, but keypads at the street post take a beating in Hurst. Sun, rain, and irrigation spray corrode the contacts and short the wiring. Most keypad repairs run $145 to $295 when we can repair the existing unit and wiring. A full keypad replacement, installed and programmed to your opener, typically costs $250 to $480.

Keypad Failure from Sprinkler Overspray

We see it constantly in Hurst: the sprinkler head nearest the street post is aimed a little high, and the keypad gets hit with hard water every morning. That minerals the keypad contacts and rots the wiring jacket. We repair the keypad and usually recommend a small drip shield or repositioned sprinkler head to stop the repeat failure.

Keypad Pairing to Existing Operators

If the keypad itself is fine but won’t trigger the gate, the issue is usually the wiring run between the street post and the operator box, or the receiver board inside the opener. We test each segment so you’re not paying for a new keypad when the fault is a $2 wire splice.

Trusted Brands We Service in Hurst

Our techs are factory-familiar with nine major opener brands, and the three we touch most often in Hurst are Viking, Ghost Controls, and DoorKing. That matters because each brand has its own limit switch logic, travel programming, and accessory compatibility. We stock common Viking and Ghost Controls control boards, remote transmitters, and safety edge parts locally for faster turnaround on Hurst jobs. When a DoorKing slide gate operator fails at a Hurst driveway, we’re not guessing at the wiring diagram; we know which relay terminal feeds the safety loop and which dip switch controls the auto-close timer. The right part and the right diagnosis the first day beats a second trip any week.

Common Gate Opener Repair Problems We See in Hurst Homes

• Post shift in clay soil: Hurst sits in the DFW black gumbo clay belt, and the soil swells after heavy rain and shrinks in summer drought. Hinge posts shift slightly, the gate binds mid-arc, and the opener overloads or reverses. The fix usually requires resetting or re-pouring the post footing and re-aligning the operator.
• Safety sensor misalignment: When a swing gate post moves even half an inch, the safety photocells no longer point at each other. The gate refuses to close, or reverses mid-cycle. We re-align the sensors and often shim the post to keep them aligned through the next wet-dry cycle.
• Keypad and intercom wiring corrosion: North Texas rain plus sprinkler overspray destroys low-voltage wire at the street post. Keypads go dead, intercoms buzz or fail to call the house. This is one of the most common Hurst gate repairs we’re called for.
• Slide gate rack and pinion binding: On sliding gates, a settled concrete track or a slightly heaved corner pulls the rack out of alignment with the drive gear. The gate stalls or chatters. We re-seat the track, adjust the rack, and reset the opener’s force limits.

Pricing for Gate Opener Repair in Hurst, TX

We Also Serve Cities Near Hurst

Calder Gate Repair serves Hurst and the surrounding Tarrant County communities, including North Richland Hills, Bedford, Colleyville, and Haltom City. If your gate opener is acting up anywhere in the mid-cities area, we’ll get a tech to you fast with the same upfront pricing and 365-Day Done Right Promise.

FAQs About Gate Opener Repair in Hurst