Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Battle Ground
A gate that will not open or close in Battle Ground is more than an annoyance. It blocks your driveway, leaves your yard exposed, and can strand a car on the wrong side of the fence. Most gate repairs we handle in Battle Ground take one visit, and we quote you a written price before any work starts, whether it’s a Viking opener that stopped responding, a Ghost Controls swing arm that lost its travel limits, or a wood gate that has dropped and is dragging on the driveway. If you need someone out today, call (903) 417-0793 and a live person answers, day or night.
Why Calder Gate Repair Is Battle Ground’s Preferred Gate Repair Company
We are not a general handyman service that occasionally touches a gate. Gate Repair is what we do every day, and the difference shows when we are working on an automatic opener that three other people have already tried to patch. Our technicians are factory-familiar with Viking, Ghost Controls, DoorKing, and Elite, plus five other major brands, so we diagnose the actual failure instead of swapping parts and hoping. Nico Alvarez leads our team, and every tech arrives in uniform, background-checked, and with a live, trackable arrival time you can follow from your phone.
Battle Ground homeowners tell us the same thing again and again: they want a price in writing before the work begins, and they want to know who is showing up. That is the Relay Standard, and it applies to every job we book. You get a written quote at the door, before-and-after photos of the repair, and a digital invoice you pay from a link. The number on that invoice matches the number you agreed to. No surprises, no “while we were in there” add-ons.
Wood Gate Repair in Battle Ground
Wood Gate Repair in Battle Ground usually means one of two things: a sagging panel that scrapes the driveway, or a gate that will not latch because the frame has twisted out of square. Most sagging wood gates around here are not actually warped panels. The hinge post has shifted in the ground. Battle Ground’s volcanic-ash-and-clay soils swell all winter and shrink hard in summer, and a post set in a shallow footing gets pumped right out of level. The gate drops, the latch side catches, and the owner assumes the wood is ruined. Often the panel is fine and the fix is re-setting the post.
Expect to pay $240 – $480 for a typical wood gate realignment in Battle Ground, including re-setting hinge hardware and adjusting the latch. If the post needs to be re-poured at a proper depth below the active soil layer, you are looking at $500 – $900 depending on access and whether we are also re-hanging the panel. A full replacement wood gate, built and hung, runs $1,100 – $2,400 for a standard driveway width.
Hinge Post Reset and Panel Re-Hang
We dig out the old footing, set the post plumb, and pour a new base deep enough to get below the heaving layer. Then we re-hang the panel and check the reveal on both sides so the gate swings cleanly through its full arc. This is the permanent fix for a gate that drops again six months after someone just tightened the hinges.
Rot Repair and Hardware Replacement
Wet winters take a toll on the bottom rail and the stile where hinges bolt through. We cut out rotted sections when the panel is worth saving, replace with pressure-treated stock, and re-drill for fresh hardware. If the rot has reached the hinge mounting points, we will tell you straight whether a new panel makes more sense than a patch.
Driveway Gate Repair in Battle Ground
Driveway Gate Repair in Battle Ground covers everything from a slide gate that has jumped its track to an automatic swing gate that stops halfway and reverses for no obvious reason. Long gravel or asphalt driveways off NE 82nd Avenue, steep approaches off NE 249th Street, and the larger acreage lots east of the fairgrounds all put different stresses on gate hardware. A slide gate on a long run collects debris in the track, chews through rollers, and eventually burns out the operator’s gearbox if the drag is not corrected.
Most driveway gate repairs in Battle Ground run $180 – $380 for mechanical fixes like roller replacement, track cleaning, and limit switch adjustment, which is the small sensor that tells the gate where to stop. A new operator installed typically lands between $700 and $1,400 depending on the brand and whether we need to add a receiver, safety edges, or re-run low-voltage wire. We stock common parts for Viking, DoorKing, and Elite on our trucks, which means fewer return trips.
Slide Gate Track and Roller Service
The problem is almost never the motor. It is drag: a bent track bracket, a seized roller, or debris packed into the rail. We clear the track, replace worn rollers and guides, and verify the gate travels end to end without straining the operator. The motor gets a current draw test so we know it is not about to fail from a problem that was ignored.
Swing Gate Operator Diagnosis
When a swing gate stops mid-cycle and reverses, we check the safety photocells and edge sensors first. Windstorms knock these out of alignment all the time in Battle Ground, and a misaligned photo eye tells the operator there is an obstruction, so it refuses to close. The fix is usually a re-alignment and a fresh mounting bracket, not a new operator.
Trusted Brands We Service in Battle Ground
We are factory-familiar with nine major gate opener brands, and that list covers nearly every opener installed in Battle Ground: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate was installed in the last 20 years, we almost certainly know the board, the limits, the wiring, and the failure modes. Our trucks carry common Viking and DoorKing parts plus Ghost Controls accessories, so a single visit usually finishes the job. If a part is not on the truck, we will tell you the real lead time and the written price before you commit to anything.
Common Gate Repair Problems We See in Battle Ground Homes
- Heaved hinge posts after a wet winter. The panel looks warped, but the post has actually been pushed up and out of plumb by expanding clay soil. The fix is a re-set footing below the active layer, not a new gate.
- Safety sensors knocked out after windstorms. Photocells and edge sensors get pushed out of alignment, which triggers the operator’s entrapment protection and stops the gate from closing. This is a UL 325 safety system, and it needs to be right.
- Corroded loop detector and keypad wiring at the driveway apron. Standing water from Battle Ground’s wet season works into the conduit and rots the low-voltage connections. Your slide gate might phantom-open at night or ignore the keypad entirely.
- Operator gearbox failure from an ungreased chain or a dragging gate. The motor keeps fighting resistance until the plastic gears strip. Greasing the chain once a year and fixing the drag is far cheaper than a new operator.
Pricing for Gate Repair in Battle Ground, WA
Here is the honest range. A basic service call and diagnostic in Battle Ground runs $89 – $129, and that fee is credited toward the repair if you approve the work. Most mechanical repairs, including hinge adjustments, roller replacement, and limit switch tuning, land between $180 and $380 before parts. A new gate operator, including installation and programming, typically runs $700 – $1,400. Control board replacement on a Viking or DoorKing opener falls between $350 and $650. Wood gate replacement with new posts runs $1,100 – $2,400. Every quote is written, and the price you approve is the price you pay.
We Also Serve Cities Near Battle Ground
Our Gate Repair in Battle Ground service also covers Ridgefield, Vancouver, Woodland, and Camas. If you live in one of those communities and your gate is acting up, the same written-price guarantee and the same 365-Day Done Right Promise apply. Call (903) 417-0793 and we will get a time on the calendar.
Serving Battle Ground, WA - Our Local Coverage Area
We’re based in the Battle Ground area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Battle Ground
Usually not. Most sagging wood gates in Battle Ground are sagging because the hinge post has heaved in the clay soil, not because the wood panel failed. We can often re-set the post, re-hang the panel, and have it swinging cleanly the same day for $240 – $480. If the panel itself is rotted at the hinge points, a replacement makes more sense, and we will quote you both options in writing before any work starts. Call (903) 417-0793 for a free estimate.
Most mechanical repairs, like roller replacement or limit switch adjustment, take 60 to 90 minutes on site. A hinge post re-set with new concrete takes three to four hours because the footing needs to cure before we hang the panel. A full operator replacement is typically a half-day job including programming, safety sensor testing, and a final walkthrough. We will give you a realistic time window when you book, and your tech’s arrival time is trackable from your phone.
Yes. Any automatic gate operator installed in Battle Ground must have functioning entrapment protection, which means photocells and safety edges that reverse the gate if anything is in the path. This is a UL 325 requirement, not an optional upgrade. If your sensors were disabled or knocked out of alignment, the gate may refuse to close, and operating it without proper entrapment protection is a real safety hazard. A trained technician should handle sensor alignment, any wiring, and force-limit testing. We test every sensor and reversal function on every job and note it on your invoice.
Phantom opening is almost always a loop detector wiring issue at the driveway apron. Standing water from Battle Ground’s wet winters corrodes the low-voltage connections, and the intermittent signal tricks the operator into thinking a car is waiting at the exit loop. We dig out the corroded splice, re-make the connection with waterproof sealant, and verify the detector is reading clean. In some cases the loop wire itself is damaged and needs to be re-pulled, which runs $350 – $600. Call (903) 417-0793 and we will diagnose it before you lose any more sleep over a gate that opens itself.
Almost certainly. We are factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we stock common replacement parts for Viking, DoorKing, and Ghost Controls on our trucks. If your opener is one of these brands, we can usually repair it without ordering parts. If a board or gearbox needs to be ordered, we will tell you the lead time and the written price before you authorize anything.
If your gate is down, dragging, or opening on its own, call (903) 417-0793. A live person answers, and we will put your written estimate together before any work begins.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Battle Ground gate repair needs with written pricing and the 365-Day Done Right Promise.