Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Converse
A gate that won’t open, sags into the driveway, or trips its breaker every other morning is more than a headache in Converse, it’s a security gap and a daily fight with your own property. Most gate repairs here run between $180 and $340 before parts, and we can usually have a technician to your Converse home the same day you call. Calder Gate Repair is the dedicated gate specialist inside the Relay Home Co. family, and we’ve spent years learning exactly how Converse gates fail: the clay, the heat, the long driveway runs, the older openers that have outlived their wiring. Call (903) 417-0793 and you’ll get a live person, a real arrival time you can track, and a written price before any work starts.
Why Calder Gate Repair Is Converse’s Preferred Gate Repair Company
Converse homeowners keep our number because we treat a gate job like a security repair, not a handyman afterthought. Every technician who rolls into Converse is background-checked, uniformed, and trained across nine major opener brands, including FAAC, Linear, and Viking. Nico Alvarez runs our gate division, and he’s built the Converse service model around one thing: you know who’s coming, when they’ll get there, and what the job costs before the first tool comes off the truck.
We’re part of the Relay Home Co. family, founded in 2009, and every Converse job carries the Relay Visibility Guarantee: a live arrival time, before-and-after photos, and a digital invoice you pay from a link. No four-hour windows. No surprise line items. And every repair is covered by the 365-Day Done Right Promise, if the repair fails within 365 days, we return at no charge. That’s written on every invoice, not implied.
Response time to Converse matters because a gate stuck open at 10 p.m. on Farm to Market Road 1516 isn’t something you want to wait on until morning. We answer calls live 24/7, and our scheduling is built around getting a technician into Converse neighborhoods fast, whether that’s a sagging iron gate off Kitty Hawk Road or a dead opener near Converse North Park.
Wrought Iron Gate Repair in Converse
Wrought iron gate repair in Converse is rarely about the iron itself. The scrollwork, pickets, and top rails on a properly built iron gate will last decades. What fails in Converse is almost always underneath: the post footings, hinge weld points, and the operator hardware bolted to them. We regularly find gates off Toepperwein Road and in the older neighborhoods around FM 78 where the hinge post has rotated in the expansive clay after a dry summer, dragging the gate across the driveway and shearing hinge bolts in the process.
Hinge and Post-Settlement Work on Iron Gates
Wrought iron is heavy, often 300 to 600 pounds per leaf, so a hinge post that moves even half an inch in the clay translates to a gate that binds, sags, and eventually strips its own operator. The fix starts at the footing. We re-set posts in properly mixed concrete with a wider base than the original install, then re-level the gate before touching the opener. When we re-weld broken hinge joints, we grind the old bead out fully rather than piling new weld on top of failing metal.
Straightening and Rust Repair on Iron Gates
A bowed rail or rusted bottom picket on a Converse iron gate is usually a symptom of that same post movement, not the cause. We only recommend panel straightening after confirming the footings are stable, otherwise the same bend returns within a season. For surface rust, we grind, treat, and prime the affected sections so the repair doesn’t flower back through a fresh coat of paint in six months. Expect most hinge re-setting and weld repairs in Converse to run $250 to $650 depending on gate size and access.
Metal Gate Repair in Converse
Metal gate repair in Converse covers the full range: tubular steel driveway gates, aluminum pedestrian gates, and the powder-coated steel enclosure around your equipment pad. The common thread in Converse is clay soil. Our technicians see more post movement here than panel failure by a wide margin, and the repair approach reflects that. We diagnose from the ground up before we ever quote a panel adjustment.
Fixing Sagging and Binding on Steel Driveway Gates
When a 14-foot steel gate starts dragging on the concrete or walking out of its catch post, Converse homeowners often assume the hinges are shot. Sometimes they are, but more often the post has settled or rotated, and the hinge is just along for the ride. We correct the geometry first, re-setting the post if needed, then re-hang the gate square and test it across its full travel. A typical steel gate realignment and hinge rebuild in Converse runs $300 to $700 before parts, depending on gate weight and how far the post moved.
Weld and Frame Repair on Converse Metal Gates
Thin-wall tube steel, common on budget gates installed 10 to 15 years ago around Converse, fails at the joints and lower rails first. We cut out the rusted section, splice in new matched-profile tube, and gusset the corners so the repair outlasts the original build. If the gate is too far gone, we tell you straight rather than welding money onto a frame that’s lost its structure. Full-frame rebuilds on a standard single-leaf gate here typically run $800 to $1,600.
Trusted Brands We Service in Converse
Our Converse technicians are factory-familiar with the openers most common in local homes: FAAC hydraulic operators on iron gates, BFT gear-driven units on newer builds, Linear swing operators on suburban lots, and Viking units on heavier commercial-style entrances. We stock common control boards, limit switches, and photocell parts for these brands locally, which means less waiting on parts when your gate is down. When we quote a repair, we name the brand and the part, not a vague “opener issue.” That level of specificity is what lets us hand you a written price with confidence.
Common Gate Repair Problems We See in Converse Homes
- Hinge post settlement from expansive clay. Converse’s wet-dry cycles make the clay under gate posts shrink and swell, and a post that rotates even a few degrees shifts the entire gate out of alignment. We see this on older lots along FM 1516 and in the long-driveway neighborhoods off Toepperwein Road more than anywhere else.
- Operator arms worn out from fighting a sagging gate. A LiftMaster or FAAC operator that’s been pushing a 600-pound misaligned gate for years wears through its internal gears, trips breakers, or burns control boards. Replacing the arm without fixing the post just schedules the next failure.
- Safety photocells and edge sensors that were never maintained. Many older Converse gates lack the entrapment protection UL 325 requires, either the eyes are misaligned, painted over, or missing entirely. We test every gate we touch against current safety standards, not just whether it opens and closes.
- Control board faults from power surges and bad grounds. Converse’s summer thunderstorm season takes a toll on gate electronics, especially older boards without surge protection on the low-voltage side. We check grounding and add inline surge suppression where needed so the new board doesn’t die in the next storm.
Pricing for Gate Repair in Converse, TX
Gate repair pricing in Converse is straightforward because we quote it in writing before the work starts. Here’s what we see across the city right now:
- Service call and diagnostic: $75 to $110
- Hinge replacement or re-weld (per hinge): $120 to $240
- Post re-setting in concrete (single post): $350 to $700
- Gate realignment and adjustment: $150 to $300
- Opener arm or limit switch replacement: $180 to $340 before parts
- Control board replacement: $220 to $450 before parts
- Full safety sensor and photocell replacement: $160 to $320
- New automatic gate installation (complete, with power and safety): $4,500 to $12,000 depending on gate size, groundworks, and operator selection
We don’t do open-ended quotes. The price we hand you after diagnosis is the price on the invoice. Call (903) 417-0793 for a free estimate, and we’ll give you a real number before you commit to anything.
We Also Serve Cities Near Converse
Beyond Converse, our technicians cover Universal City, Schertz, Cibolo, and San Antonio with the same same-day response and written pricing. If you’re on the Converse side of San Antonio or in a neighboring suburb, our Gate Repair team handles the full service area with one phone call to (903) 417-0793.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Converse
Because the panel was never the problem. Converse’s expansive clay soils shrink and swell with the area’s wet-dry cycles, and hinge posts set in that clay rotate or settle over time. Straightening the panel without re-setting the post is a temporary fix that lasts until the next dry spell. The only permanent repair is re-setting the post footing in properly mixed concrete, then re-leveling the gate on top of it. That’s the fix we do most often across Converse, and it’s why a post inspection comes before any panel work on our quotes. Call (903) 417-0793 and we’ll tell you which one your gate actually needs.
We service FAAC, LiftMaster, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, covering virtually every opener installed across Converse. Our technicians stock common parts for FAAC, Linear, and Viking locally, so repairs on those brands often happen same-visit. The brand matters because control board logic, limit switch design, and safety sensor compatibility all differ. We diagnose by brand, not by guesswork. For a same-day diagnosis, call (903) 417-0793.
No, and we won’t promise that. A proper automatic gate installation includes groundworks (post excavation and concrete), power run, operator mounting, safety edge installation, and full UL 325 reversal testing. On Converse clay, we pour post footings deeper and wider than the original, and concrete needs cure time before any gate hangs on it. Expect a complete installation to take several days from excavation to final safety testing. We’ll give you a written timeline and a written price before we start, and we never compress the schedule to make a sale.
Yes. Under UL 325, the entrapment protection standard for automatic gates, every automatic gate in Converse must have working safety devices: photocells that stop the gate when something crosses the beam, edge sensors on the leading and trailing edges, and proper reversal on contact. Older gates that predate the standard often lack these entirely, and a technician who doesn’t check them is leaving you open to serious liability. On every repair and installation, Calder Gate Repair tests and documents safety sensor function before we call the job done. If yours are missing or dead, we’ll quote the fix separately so you know exactly what compliance costs.
The decision comes down to three things: the condition of the post footings, the integrity of the gate frame, and the age of the operator. On Converse clay, a gate with stable posts and minor sag is a repair. A gate with rust-through on the lower rail, multiple cracked welds, or an opener over 15 years old with failing board after failing board is often cheaper to replace. We give you both numbers, the repair cost and the replacement cost, and let you decide. No pressure, no upsell. Call (903) 417-0793 and we’ll assess it on site.
If your gate is down in Converse, don’t fight it another day. Calder Gate Repair will get a technician to your home fast, hand you a written price before anything starts, and back the repair for 365 days. Call (903) 417-0793 now and you’ll talk to a real person who can book your visit on the spot.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Converse and the surrounding area.