Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Coronado
Gate repair in Coronado usually comes down to two things: a gate that won’t open when you’re late for the ferry, or a gate that won’t close when you’re leaving for the day. Most repairs here run $180 – $480, and we can typically get a technician to your home the same day you call. Calder Gate Repair is a dedicated gate repair specialist, part of the Relay Home Co. family since 2009, and we know exactly what Coronado’s coastal conditions do to swing gates, slide gates, and the openers that drive them. Call (903) 417-0793 and a live person answers, 24/7.

Why Calder Gate Repair Is Coronado’s Preferred Gate Repair Company
We work on gates across Coronado every week, from the Craftsman-era homes on Country Club Drive to the newer builds near the Cays. The ocean air here doesn’t take a day off, and neither do the problems it creates for metal gates. Our technicians are background-checked, uniformed, and dispatched with a live, trackable arrival time, not a four-hour window that leaves you guessing. You’ll know who’s coming, when they’ll show up, and exactly what the job costs before a single bolt gets turned.
Every Calder Gate Repair job in Coronado carries the Relay Standard: a written price before work starts, before-and-after photos, and a digital invoice you pay from a link. That’s not an upsell, it’s how we’ve operated since 2009, with each location independently owned and operated under the Relay Visibility Guarantee.
Nico Alvarez leads our gate repair team, and the standard he holds is simple: if a repair fails within 365 days, we return at no charge. That’s the 365-Day Done Right Promise, written on every job. No fine print, no phone tag. Coronado homeowners tell us it’s the reason they stopped calling general handymen for gate work.
Wrought Iron Gate Repair in Coronado
Wrought iron gate repair in Coronado is the most common service call we get, and for good reason. The salt air coming off the Pacific corrodes iron faster here than almost anywhere else in San Diego County. Hinges seize, latch hardware rusts through, and the bottom rails of swing gates start flaking within a few years if they’re not maintained. A typical wrought iron hinge and latch repair in Coronado runs $160 – $350, while full rust remediation and repainting of a double swing gate usually lands between $600 – $1,200 depending on the amount of corrosion and the gate’s size.
Hinge and Post Reinforcement
When a wrought iron gate starts sagging, most people tighten the hinges and hope for the best. But in Coronado’s sandy soil, the real problem is often the hinge post shifting in its footing. We reinforce the post, reset the gate on fresh hinges, and verify the operator isn’t overworking against a bound gate, which is what actually kills opener motors over time.
Rust Remediation and Protective Coating
Surface rust you can scrape off with a wire brush is manageable. But the kind of rust we see near the Coronado Shores, where airborne salt sits on metal year-round, often requires grinding back to clean steel, treating the surface, and applying a marine-grade coating. If you skip the coating step, you’ll be redoing the same repair in 18 months.
Metal Gate Repair in Coronado
Metal gate repair in Coronado covers more than ornamental iron. We handle steel and aluminum gates on driveways across the village and down toward the Silver Strand. Aluminum gates resist rust better than steel, but they dent, their welds crack at the corners, and they’re often paired with operator models that were installed a decade or more ago. Basic metal gate repair, such as a realignment or a latch replacement, typically costs $140 – $320 in Coronado. Full steel gate frame repair with welding and reinforcement runs $400 – $900.
Welding and Frame Repair
Coastal moisture gets into hairline cracks, rusts them from the inside, and turns a small split into a structural failure within a season. We grind out the crack, weld it properly, and reinforce the joint. A patched-looking weld is a sign someone prioritized speed over the next ten years of salt exposure.
Gate Realignment and Track Service
Slide gates along Coronado’s busier streets, like those near Orange Avenue and Glorietta Boulevard, collect sand and debris in their tracks. When the gate fights a dirty or misaligned track, the operator pulls more amps and overheats. Realignment is usually a same-day fix. It costs less than a new operator, and it’s often the difference between a gate that lasts five more years and one that fails next month.

Trusted Brands We Service in Coronado
Our technicians are factory-familiar with nine major gate opener brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Coronado, we see a lot of Viking and Elite operators on older estate gates, and Ghost Controls kits on newer residential installs. We stock common parts for these brands locally, so most repairs don’t wait on a parts shipment. If you’re not sure what opener you have, a photo of the model plate sent to (903) 417-0793 is enough for us to tell you whether we can fix it today.
Common Gate Repair Problems We See in Coronado Homes
- Salt corrosion on hinges and latches. The marine layer keeps metal damp even on sunny days, so hinges that work fine inland seize up within a few seasons here. We see this constantly on gates within two blocks of the beach along Ocean Boulevard and Avenida Del Sol.
- Photocell failure from corroded lenses. Safety sensors get hit with salt spray and temperature swings. The result is a gate that reverses for no reason, or worse, one that doesn’t reverse when it should. This is a $120 – $180 fix, not a full operator replacement.
- Post shifting in sandy soil. Coronado’s soil doesn’t hold footings the way inland clay does. Gate posts lean, swing gates drag, and slide gates bind. We correct the post and the gate, not one or the other.
- Operator strain from misaligned gates. When a gate sags or binds, the opener motor works harder every cycle. Most burnt-out operators we replace in Coronado weren’t bad motors, they were motors killed by a gate that should have been realigned months earlier.
Pricing for Gate Repair in Coronado, CA
Here’s what you can expect to pay for gate repair in Coronado right now. A service call and diagnosis runs $79, which we waive if you approve the repair. Hinge and latch replacement: $160 – $350. Photocell or limit switch replacement: $120 – $250. Gate realignment: $140 – $320. Full operator replacement, parts included: $550 – $950 depending on brand and horsepower. Welding and frame reinforcement: $400 – $900. Every quote is written and agreed to before any work starts. The number on the invoice matches the number at the door, always. Call (903) 417-0793 for an exact estimate.
Our Gate Repair team delivers the same pricing honesty across every service we offer, from hinge replacement to full operator installs.
We Also Serve Cities Near Coronado
If you’re across the bridge or down the Silver Strand, Gate Repair in Coronado extends our full service area to San Diego, National City, Chula Vista, and Imperial Beach. Same technicians, same 365-Day Done Right Promise, same written price before work starts.
Serving Coronado, CA - Our Local Coverage Area
We’re based in the Coronado area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Coronado
The sag almost always traces back to the hinge post shifting in Coronado’s sandy soil, not the hinge hardware itself. Tightening hinge bolts on a post that’s slowly leaning only masks the problem. We excavate the post footing, reinforce or reset the post, and then rehang the gate so the operator isn’t fighting gravity on every cycle. Most sag repairs run $250 – $500 depending on post condition. Call (903) 417-0793 and we’ll assess it before quoting.
We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Viking and Elite are the two we see most often on Coronado estate gates, while Ghost Controls shows up frequently on newer residential installs. If your opener isn’t on that list, still call us, most oddball brands share internals with one of the major manufacturers.
Yes. California requires automatic gates to have functioning safety sensors, photo eyes, and proper reversal testing, both for pedestrian safety and liability compliance. Coronado’s salt air corrodes photocell lenses faster than inland areas, so we recommend checking sensor function every six months. A stuck-open photocell is a quick fix, but a failed one that stops your gate from closing safely needs to be addressed the same day. We replace sensors for $120 – $180 including parts.
It means the repair has to address more than the visible symptom. In the Coronado Village area near Orange Avenue, we handled a LiftMaster-equipped wrought iron swing gate that had sagged after years of coastal exposure. Our tech corrected the sag by reinforcing the hinge post and adjusting the operator, then replaced the corroded safety photocell so the gate reversed properly again. The fix held because we addressed the post and the electronics, not just the visible lean. Any gate repair in Coronado that skips the corrosion treatment on hinges, tracks, and sensor lenses is a temporary fix.
No, and we won’t pretend otherwise. Operator installation requires measuring the gate, checking the post and mounting surface, confirming power availability, and ordering the right operator for your gate’s weight and cycle demand. Most Coronado operator installs are scheduled within 3 – 5 business days and run $550 – $950 including the new unit and labor. What we can do today is diagnose a failed operator, and if the repair is viable, get your gate running again. Call (903) 417-0793 for a free measure and written quote.
Need a gate fixed in Coronado? Call Calder Gate Repair at (903) 417-0793. A live person answers, the estimate is free, and the price is in writing before anything starts.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Coronado with gate repair, electric gate repair, and gate opener repair since 2009.





Before
After
Before
After
Before
After