Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Delray Beach
Gate repair in Delray Beach, FL usually costs between $180 and $650 depending on what’s failed, and most jobs can be scheduled within 24 to 48 hours. Call Calder Gate Repair at (903) 417-0793 and you’ll get a written price before any work starts, a live trackable arrival time, and a repair backed by our 365-Day Done Right Promise. Coastal salt air eats gate hardware faster here than almost anywhere in Palm Beach County, so local experience matters more than you’d think.
Our Gate Repair team knows what happens to hinges, posts, and operator boards a mile from the ocean. We stock galvanized and stainless hardware for Delray Beach jobs specifically, because inland fixes don’t survive out here.
Why Calder Gate Repair Is Delray Beach’s Preferred Gate Repair Company
Delray Beach homeowners keep calling us back for one simple reason: we write down the price, tell you exactly when the technician will arrive, and we come back free if the repair fails within 365 days. That’s the 365-Day Done Right Promise, and it’s stated in writing on every job. No fine print, no phone tag, no vague four-hour windows.
Our technicians arrive in uniform, background-checked, with a live arrival time you can track from your phone, just like a rideshare. You’ll get before-and-after photos of the work and a digital invoice you can pay from a link. That’s the Relay Standard, and it applies to every Delray Beach job we book.
Led by Nico Alvarez, Calder Gate Repair is part of the Relay Home Co. family, which has been operating since 2009. Each location is independently owned and operated, but the guarantees never vary: a written price, a written guarantee, and a free second visit if the repair doesn’t hold. A live person answers every call 24/7, not a voicemail.
We know Delray Beach’s neighborhoods: the oceanfront condos east of A1A, the mid-century homes in Lake Ida, the newer builds off West Atlantic Avenue, and the gated communities near Morikami Park. Salt exposure, gate age, and operator brand all change how we approach a repair, and we’ve seen enough of all three to diagnose problems quickly.
Commercial Gate Repair in Delray Beach
Commercial Gate Repair in Delray Beach covers a lot of ground: sliding security gates at warehouse facilities off Congress Avenue, barrier arm operators at parking garages near Atlantic Avenue, and swing gates at condo communities along the Intracoastal. These systems see hundreds of cycles a day, and salt air accelerates wear on the parts that move most: rollers, chains, hinge bearings, and the operator’s internal limit switches.
Our commercial team handles automated operators from Linear, Viking, DoorKing, and Ghost Controls, plus the low-voltage wiring and safety loops that keep a gate compliant. In Delray Beach, commercial gate repairs typically run $350 to $1,200 depending on the operator and the extent of corrosion or board damage. We give a written quote before touching anything.
Operator Replacement And Control Board Swap
When a commercial operator board fails from salt-laden humidity, we don’t patch it and hope for the best. We replace the board, test the safety inputs, and confirm the gate’s travel limits are correct. A DoorKing or Viking board swap in Delray Beach typically falls between $400 and $800 parts included.
Weld And Hinge Post Repair For High-Cycle Gates
Commercial gates that sag or bind usually have a corroded hinge post or a cracked weld at the hinge plate. We cut out the failed section, weld in new steel, and re-level the gate so the operator isn’t fighting the extra load. On the coast, we recommend galvanized posts and stainless fasteners for any commercial repair we do.
Iron Gate Repair in Delray Beach
Iron Gate Repair in Delray Beach is more about corrosion control than mechanical wear. Wrought iron and steel gates east of the Intracoastal sit in a constant salt fog, and the first things to fail are usually the hinge welds and the post footings. You’ll see rust bleed at the fasteners, the gate starts to sag on the latch side, and eventually the operator’s motor labors against the extra friction until it burns out or trips its safety sensor.
We repair iron gates by removing the failed hardware, treating the affected steel, and replacing hinges and fasteners with stainless components. If a hinge post is too far gone, we set a new galvanized post in concrete. Most iron gate repairs in Delray Beach run $250 to $700 depending on whether we’re realigning one hinge or replacing a post. We always provide a written price before starting.
Hinge And Post Replacement
A corroded hinge post is the most common iron gate failure we see within a mile of the beach. The salt attacks the buried portion of the post and the weld zone at the hinge plate. In Delray Beach, we always recommend galvanized posts with stainless hinges and fasteners for coastal installations.
Rust Treatment And Weld Repair
Surface rust on iron gates isn’t just cosmetic, it’s structural. We grind back the corrosion, weld any cracks, and apply a marine-grade coating that stands up to salt air far longer than standard paint. For gates with heavy rust at the joints, we’ll often recommend replacing the affected sections rather than repeatedly patching them.
Trusted Brands We Service in Delray Beach
Our Delray Beach technicians are factory-familiar with nine major gate opener brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common control boards, limit switches, and remotes stocked for the Delray Beach area, which means a same-week repair for most opener problems instead of waiting on a parts shipment. The brands we see most often in Delray Beach are LiftMaster, Viking, and Ghost Controls, particularly on the oceanfront and Intracoastal properties where salt exposure is highest. Whatever opener you have, we’ll diagnose it to the board level and give you a clear choice between repair and replacement before any work is done.
Common Gate Repair Problems We See in Delray Beach Homes
- Corroded hinge posts and welds. On gates within about a mile of the beach, painted steel hinge posts fail years earlier than the same post would inland. The gate sags, the latch stops lining up, and the motor fights the extra friction.
- Premature control board failure. Salt-laden humidity gets into operator housings and eats the solder joints on control boards, especially on older LiftMaster and FAAC units. The gate may stop responding or reverse erratically for no obvious reason.
- Rust bleed at fasteners causing binding. Galvanized steel gates installed with standard zinc-plated fasteners show rust at every screw and bolt head within a few years on the coast. That rust swells the fasteners and binds the gate at the hinge points.
- Safety sensor trips from salt haze. Photocell safety sensors near the beach can accumulate a fine salt film that scatters the beam and causes false tripping. The gate reverses mid-cycle even when nothing is in the path.
Pricing for Gate Repair in Delray Beach, FL
Here’s what we actually charge in Delray Beach. A basic gate realignment or hinge tightening runs $180 to $300. Replacing a corroded hinge post with a galvanized post set in concrete typically costs $350 to $650. Automatic gate opener repair, including a new control board, runs $300 to $700 depending on the brand and whether we have the part on the truck. Full operator replacement with a LiftMaster or Viking unit typically falls between $800 and $1,500 installed.
- Gate realignment / hinge tightening: $180 – $300
- Hinge post replacement (galvanized, set in concrete): $350 – $650
- Control board replacement: $300 – $700
- Full operator replacement (installed): $800 – $1,500
- Weld repair / rust treatment per section: $150 – $350
Everything is quoted in writing before any work begins. The price we agree on is the price on your invoice. Call (903) 417-0793 for a free estimate, and we’ll send a technician to Delray Beach with the parts likely to be needed on board.
We Also Serve Cities Near Delray Beach
Our crews cover Delray Beach and the surrounding South Florida corridor, including Boynton Beach, Boca Raton, Deerfield Beach, and Greenacres. If you live in any of these nearby areas, the same written pricing and 365-Day Done Right Promise applies to your gate repair. Call (903) 417-0793 and a live person will book your appointment.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Delray Beach
Delray Beach’s position directly on the Atlantic coastline exposes gates east of the Intracoastal to persistent salt aerosol, which settles on metal surfaces and accelerates corrosion roughly twice as fast as inland locations. Boynton Beach has more inland area and less direct onshore wind, so the same hardware lasts longer there. In Delray Beach, we recommend galvanized posts, stainless fasteners, and marine-grade coatings for any coastal gate installation. Call (903) 417-0793 to have your gate assessed for salt damage.
Galvanized steel with stainless steel hinges and fasteners holds up best against Delray Beach’s salt air. Aluminum gates with stainless hardware also perform well on the coast, though aluminum isn’t as rigid for long swing gates. Powder-coated steel looks great at first but will rust at the edges and fasteners within a few years unless the coating is marine-grade. We can advise you on the right materials for your specific street and salt exposure.
Yes, salt air is a common cause of false reversing in Delray Beach automatic gates. A fine salt film on the photocell sensor lenses scatters the safety beam, which the operator reads as an obstruction. Control board corrosion from salt-laden humidity can also cause intermittent reversing. We clean and test the sensors first, then inspect the board if the problem persists. Call (903) 417-0793 and we’ll diagnose it over the phone or at your property.
For properties east of the Intracoastal Waterway, we recommend servicing your gate operator every 6 months rather than the typical 12-month interval used inland. Salt air corrodes connections, rollers, and the operator’s internal components faster on the coast, and a twice-yearly service catches problems before the gate fails. The service includes cleaning the safety sensors, lubricating the moving parts, checking the limit switches, and inspecting for early corrosion.
In most cases, yes. A sagging gate in Delray Beach is usually caused by a failing hinge post or hinge welds, not by damage to the gate leaf itself. We replace the affected post, install stainless hinges, and re-level the gate so it operates cleanly. This typically costs a fraction of a full gate replacement. We’ll confirm what’s actually wrong before recommending any repair, and the written quote always comes first.
If your gate is sagging, sticking, or refusing to open in Delray Beach, call Calder Gate Repair at (903) 417-0793. You’ll get a written price before any work starts, a trackable arrival time, and the 365-Day Done Right Promise on every repair. We serve all of Delray Beach, from the oceanfront east of A1A to the communities near West Atlantic Avenue, and a live person is available 24/7 to take your call.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Delray Beach and South Florida.