Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hicksville, NY
Gate repair in Hicksville, NY usually runs between $180 and $340 for most opener and mechanical fixes, with same-day service available for urgent jobs. Calder Gate Repair handles the full range of gate work across Hicksville, from a broken LiftMaster opener on a Levitt-built home to a sagging driveway gate near Bethpage Parkway. If your gate won’t open, won’t close, or grinds every time it moves, call (903) 417-0793 and a live person will answer.
Why Hicksville Homes Are Different
Hicksville has one of the largest concentrations of mid-century Levitt homes on Long Island, and that shapes nearly every gate job we do here. Most driveways were poured narrow by modern standards, so a swing gate that was retrofitted in the 1990s or 2000s often sits closer to the house than it should. That tight clearance affects how we mount openers, where we run conduit, and how much swing arc we can safely allow.
The soil matters too. Hicksville sits on sandy, fast-draining ground that settles over decades, and we regularly see gate posts that have drifted half an inch out of plumb near the seams of older concrete driveways. A gate that scrapes the ground in March may have worked fine last fall, simply because the frost left the post a fraction lower. Add in salt air coming off the South Shore and you get hinge corrosion and limit switch failures that inland towns don’t see as often. When we quote a repair in Hicksville, we’re pricing for those conditions, not for a generic Long Island gate.
Our Main Hicksville Services
Most Hicksville homeowners call us for one of three problems: a gate that doesn’t move, an opener that runs but won’t budge the gate, or a system that works intermittently. Each has its own page with pricing, local details, and what to expect.
Gate Repair in Hicksville
This covers the physical gate itself: sagging or dragging panels, seized hinges, bent tracks, rusted frame corners, and posts that have shifted out of alignment. On Levitt-era properties where driveway edges are tight, a dragging gate often scrapes along the concrete and wears a groove into both the gate bottom and the apron. We straighten, reinforce, weld where needed, and reset posts with proper footing rather than a quick shim. See Gate Repair in Hicksville for the local breakdown.
Electric Gate Repair in Hicksville
Electric gate problems in Hicksville usually involve the wiring, the control board, safety sensors, or the conduit carrying power from the house. We see a fair share of underground feed lines that have been nicked by lawn equipment or degraded by ground moisture over 20-plus years. The fix starts with a diagnostic, not a guess. We map the circuit, identify the failing component, and give you the written price before any part comes off the gate. Details are on the Electric Gate Repair in Hicksville page.
Gate Opener Repair in Hicksville
When the opener motor runs but the gate doesn’t move, or it moves halfway and reverses, the cause is usually the limit switch, a stripped drive gear, or a capacitor that has given up. Hicksville’s mix of older FAAC and Linear units means we stock the common replacement parts for those brands, which keeps most opener repairs to a single visit. If you hear a hum but no movement, cut power at the breaker and call us before the motor burns out. Read more at Gate Opener Repair in Hicksville.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hicksville
We’re factory-familiar with the openers Hicksville homes actually have: FAAC, BFT, Linear, and Viking among them. Common replacement parts for these brands are stocked on our trucks, which means most jobs don’t wait on a parts shipment. See our brands for the full list and what we carry.
Pricing for Gate Company in Hicksville, NY
| Service | Typical range in Hicksville |
|---|---|
| Gate opener motor replacement | $350 – $750 |
| Control board replacement | $250 – $600 |
| Limit switch replacement or adjustment | $120 – $280 |
| Hinge replacement (single gate) | $150 – $400 |
| Gate wheel or roller replacement | $110 – $260 |
| Safety sensor alignment or replacement | $130 – $300 |
| Chain or belt replacement | $180 – $420 |
| Track straightening or realignment | $200 – $500 |
| Solenoid or actuator replacement | $180 – $450 |
| Underground wiring repair | $250 – $600 |
Prices in Hicksville tend to run higher when a gate has gone years without service, when posts need to be reset rather than shimmed, or when salt corrosion has spread across multiple components. You’ll always get a written price before any work starts, and that number is the number on the invoice.
Neighborhoods We Serve in Hicksville
We cover all of Hicksville, from the original Levitt streets north of Old Country Road to the newer builds south of the LIRR tracks. Typical response time across the area is 60 to 90 minutes for urgent repairs.
- Original Levittown section along Newbridge Road
- Dutch Broadway and north toward Woodbury Road
- Areas around Hicksville High School
- Streets near the LIRR station and Broadway Mall
- South Hicksville toward Old Country Road
Service Area – Cities Near Hicksville
Beyond Hicksville itself, we run calls into the neighboring communities with the same pricing and the same written guarantee. That includes Levittown, NY south of the LIRR, Hempstead, NY to the southwest, Freeport, TX for our Texas coverage, and Long Beach, NY along the water. If you’re on the edge of any of these areas, call us and we’ll confirm coverage before you commit to anything.
Serving Hicksville, NY - Our Local Coverage Area
We’re based in the Hicksville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hicksville
Most repairs to an existing gate don’t require a permit in Hicksville, as long as you’re not changing the driveway layout or installing a new gate where none existed. If you’re replacing an opener, the electrical work is low-voltage in most cases and falls outside permit requirements. We’ll tell you during the estimate if your specific job needs anything filed with the town of Oyster Bay.
For a gate stuck open or a gate that won’t close, we typically arrive within 60 to 90 minutes anywhere in Hicksville. Every call is answered by a live person 24/7, so you’re never leaving a voicemail and hoping. If the job can’t be fully resolved the same day, we’ll secure the gate and schedule the finishing work before we leave.
We cover all of Hicksville, from Newbridge Road to the Bethpage border and from Old Country Road up to the expressway. There’s no map-boundary surcharge and no fee for being south of the tracks. If you’re just outside Hicksville in a neighboring town, call (903) 417-0793 and we’ll confirm if it’s still in our normal service area.
If your gate is acting up in Hicksville, get the written price first. Call (903) 417-0793 for a free estimate and we’ll have a background-checked technician at your gate quickly, with the parts and the answer you need.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hicksville Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.