Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Morgan Hill
If your gate is grinding, sagging, or refusing to open in Morgan Hill, the most common culprit isn’t the motor, it’s the post holding the gate up. Morgan Hill’s east-side hillside lots sit on expansive clay that heaves and settles with seasonal rain, shifting hinge posts and throwing even well-built gates out of alignment. Calder Gate Repair fixes the whole problem, not just the symptom, with a written price before any work starts and a 365-Day Done Right Promise on every repair. Call (903) 417-0793 any time, a live person answers.
Why Calder Gate Repair Is Morgan Hill’s Preferred Gate Repair Company
We work on Morgan Hill gates every week, from the Paradise Valley neighborhoods east of Dunne Avenue to the flatter tracts near Cochrane Road and the rural edge properties toward San Martin. Our Gate Repair team knows what the local soil does to posts, what the summer heat does to control boards, and which operators hold up best on hillside lots. The Relay Standard applies to every job in Morgan Hill: you get a live arrival time you can track, a written price agreed before we touch a bolt, before-and-after photos, and a digital invoice you pay from a link. No four-hour windows. No phone tag.
Nico Alvarez leads our crews, and every technician who rolls into Morgan Hill is background-checked and uniformed. Since the founding of the Relay Home Co. network in 2009, we’ve built our reputation on one thing: being the gate company that shows up when we say we will and charges what we quoted. The 365-Day Done Right Promise backs every repair in writing. If the fix fails within a year, we come back free.
Wrought Iron Gate Repair in Morgan Hill
Wrought iron gate repair in Morgan Hill is one of our most common calls, and it almost always starts the same way: the gate looks heavy, the hinges sound dry, and somewhere along the sweep the gate starts scraping the ground or binding at the latch. In Morgan Hill, the underlying issue is frequently the post. Hillside clay swells in wet winters and shrinks in dry summers, and a 12-foot iron gate on a post that’s shifted even half an inch will sag enough to catch. We re-set posts, rebuild hinge mounts, re-balance the leaf, and then adjust the operator so it isn’t fighting the extra load.
A typical wrought iron gate repair in Morgan Hill runs $240 to $520 for hinge and alignment work before parts. If a post has to be re-dug and re-set in concrete, which is common on east-side hillside lots, expect $450 to $850 depending on access and operator adjustments. We quote the full number before work starts, in writing.
Post Re-Set and Re-Bedding
When the hinge post has heaved or leaned, straightening the gate panel without fixing the post is a temporary patch that fails again after the next wet season. We pull the post, re-dig the footing below the frost and movement line, and set it plumb in fresh concrete with proper drainage. The gate gets re-hung, the sweep line corrected, and the latch re-aligned.
Hinge and Latch Rebuild
Barrel hinges wear oval over time, especially on heavy iron gates opened and closed several times a day. We weld or replace worn hinge barrels, reinforce cracked weld points, and adjust the latch so the gate closes square instead of bouncing against the strike plate.
Metal Gate Repair in Morgan Hill
Metal gate repair in Morgan Hill covers everything from aluminum tube-frame driveway gates to solid steel pedestrian gates on the newer developments off Butterfield Boulevard. Different metals fail differently here: steel rusts along the bottom rail where sprinkler overspray and winter damp sit, while aluminum develops stress cracks at weld points when posts move and the frame flexes. Our crews repair both, and we re-align the gate to the operator after any structural fix so the motor isn’t working against a crooked leaf.
Morgan Hill metal gate repairs typically fall between $180 and $400 for weld and rail work. If the gate needs to be removed, straightened, re-welded, and re-hung, plan for $350 to $700. We’ll give you the exact figure in writing before we start, always.
Weld and Rust Repair
Rust on a Morgan Hill steel gate usually starts at the bottom rail, right where the sprinklers hit and winter moisture collects. We cut out the failing section, weld in a matching patch, grind it smooth, and treat the bare metal before the gate is hung back on its hinges.
Gate Realignment
A gate that drags on the driveway or stops short of the latch is usually out of square, not broken. We re-align the frame, correct the hinge geometry, and reset the sweep line so the gate clears the ground through its full arc. Then we test the operator’s force settings so it isn’t straining on every open and close cycle.
Trusted Brands We Service in Morgan Hill
Our technicians are factory-familiar with the openers Morgan Hill homeowners actually have mounted on their posts: Linear, Viking, Ghost Controls, and DoorKing, plus LiftMaster, FAAC, BFT, Mighty Mule, and Elite. Most gate repair problems are not brand-specific, but when a control board fails or a limit switch drifts, knowing the brand’s wiring and programming saves you a second visit. We carry common repair parts for Morgan Hill jobs in our service vehicles, and for less common parts we order them in so the fix is still completed on schedule without a vague “we’ll be back sometime” window.
Common Gate Repair Problems We See in Morgan Hill Homes
- Hinge post heave from expansive clay. The east-side lots below the Diablo Range are notorious for it. The post moves, the gate binds, the operator strains, and the panel gets blamed when the footing was always the real issue.
- Control board burnout after summer heat cycles. Unshaded operator boxes on south-facing Morgan Hill driveways absorb a lot of heat. Older Linear and DoorKing boards cook slowly, then fail in the fall when the first cold snap hits.
- Misaligned safety photocells. Ground movement or weed growth along rural edge properties pushes photo eyes out of line and the gate reverses mid-cycle, which is a UL 325 entrapment protection problem that should be fixed immediately.
- Sagging drive gates on long rural driveways. Properties further out toward the foothills often have wider, heavier drive gates. A 14-foot steel gate exerts enormous torque on its post, and after a few wet winters the gate sags enough to drag.
Pricing for Gate Repair in Morgan Hill, CA
Morgan Hill gate repair work is priced by the job, not the hour, so the number you agree to is the number on the invoice. Hinge and alignment jobs run $180 to $400. Post re-sets on hillside lots start around $450 and can reach $850 with operator adjustments. Opener repairs, including control boards and limit switches, typically run $220 to $480 before parts. Full operator replacements, when the existing unit is not worth repairing, start around $600 to $1,100 installed depending on the brand and gate size.
Every quote includes a written price before work begins. Call (903) 417-0793 for a free estimate on your Morgan Hill gate, and we’ll walk you through exactly what the repair involves and what it costs.
We Also Serve Cities Near Morgan Hill
Beyond Morgan Hill, our crews regularly cover San Martin, Gilroy, Los Gatos, and Campbell. If your gate is acting up and you’re in one of the surrounding communities, the same written pricing and 365-Day Done Right Promise apply. We dispatch locally, so response times stay short across the South County and West Valley areas.
Serving Morgan Hill, CA - Our Local Coverage Area
We’re based in the Morgan Hill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Morgan Hill
Because the panel was never the problem. Morgan Hill’s expansive clay soils, especially on hillside lots east of Dunne Avenue and toward the Diablo Range foothills, heave and settle with seasonal moisture changes. Your hinge post is likely moving, and every time someone straightens the gate leaf without re-setting the post, the sag returns after the next wet winter. Post re-setting with a properly dug footing and fresh concrete is the actual fix, and it’s the repair we do most often in Morgan Hill. Call (903) 417-0793 and we’ll check the post first.
Yes, and it should be addressed today. A gate that won’t reverse when obstructed is failing its UL 325 entrapment protection requirement, which means the operator is not sensing resistance or the safety photocells are out of line. This is a serious safety issue, especially on driveways where kids and pets are present. We test the reversal force, realign the photo eyes, and verify loop detector function on every Morgan Hill safety call. If your gate ever fails to reverse, call (903) 417-0793 and we’ll dispatch a technician.
Most hinge, alignment, and opener repairs are finished in one to two hours on site. Post re-sets take longer because the concrete has to cure before the gate can be re-hung; those jobs are typically a half-day. Upfront, we’ll give you a written price and a clear time estimate so you know what to expect before we start. If it’s an emergency, call (903) 417-0793 and we’ll get a technician to your Morgan Hill address as quickly as possible.
A real gate installation includes groundworks, power, safety edges, and reversal testing, not just hanging a gate leaf on two posts and bolting on an opener. The footing has to be dug to the correct depth for Morgan Hill’s soil conditions or the post will move within a season or two. The operator needs a properly wired power run, a set of working safety photocells, and a tested reversal system that meets UL 325. If a quote doesn’t include those things, the gate will work for a while and then start failing. A proper Morgan Hill installation takes planning, which is why we don’t promise same-day install work. We promise a free measure and a written price first. Call (903) 417-0793 to schedule a measure.
Yes, and it’s the most under-diagnosed cause of gate failure in Morgan Hill. The hillside lots east of Dunne Avenue sit on expansive clay that swells with winter rain and shrinks in summer heat, shifting gate posts by up to an inch in a single season. A gate that swung smoothly for years can start binding at the hinge post after one wet winter. We responded to a call in the Paradise Valley neighborhood where a 12-foot wrought iron swing gate had gone from smooth to grinding in a single season, the hinge post had heaved about an inch from clay soil movement. We pulled the old post, re-dug the footing to proper depth with fresh concrete, re-set the hinge post plumb, adjusted the LiftMaster operator arm, and re-tested the safety photocell. Six months later the gate was still swinging clean. For a free assessment of your gate and post, call (903) 417-0793.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Morgan Hill since 2009.