Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across New Braunfels
Gate repair in New Braunfels usually costs between $165 and $480 for most common fixes, and Calder Gate Repair can have a background-checked tech at your door fast, with a written price in hand before any work begins. If your gate won’t open, sags, or stops halfway after a storm, call (903) 417-0793 and a live person answers, 24/7, no phone tree. We work throughout New Braunfels daily, from River Chase to Oakwood Estates to areas off FM 306, and our techs know the local soil and storm patterns that cause most gate failures here. No vague four-hour windows. You get a trackable arrival time and an invoice you pay from a link.
Why Calder Gate Repair Is New Braunfels’s Preferred Gate Repair Company
New Braunfels homeowners deal with a specific set of gate problems, and we’ve built our repair approach around them. Comal County’s expansive clay soil shifts with every heavy rain, knocking posts out of alignment and binding slide gates. A tech who hasn’t worked this soil will keep adjusting the operator when the real issue is the footing. Our Gate Repair team starts with the post, then works outward to the operator, hinges, and sensors.
Every Calder tech arrives in uniform, background-checked, with a live arrival time you can track from your phone. We’re part of the Relay Home Co. family, established 2009, and each location operates under The Relay Visibility Guarantee. That means before-and-after photos of the work, a digital paper trail, and a price in writing before we touch a bolt. Nico Alvarez leads the Calder team, and the standard is simple: if the repair isn’t right within 365 days, we come back and make it right at no charge.
Reviews from New Braunfels customers consistently mention the same things: the tech showed up when promised, the price didn’t change, and the gate worked through the next storm. That’s the job.
Sliding Gate Repair in New Braunfels
Sliding Gate Repair in New Braunfels is one of our most common calls, and in this town the root cause is almost always under the gate, not in the motor. The region’s expansive clay swells after spring rains and contracts during dry spells. That movement shifts post footings, which tilts the V-track or the rack, and the gate starts binding, grinding, or stopping midway. A LiftMaster or Ghost Controls operator gets blamed, but the motor is usually fine. The fix is re-leveling the gate, re-anchoring the post, and re-testing the limit switch, the small sensor that tells the gate when to stop.
Most sliding gate repairs in New Braunfels run $190 to $420, including the service call, labor, and common hardware like rollers, V-wheels, and limit switches. Heavier jobs, like re-pouring a shifted post footing or replacing a bent rack section, land higher. We give you that number in writing before work starts, and the invoice matches.
Track, Rollers, and Rack Alignment
When storm runoff washes topsoil or debris into the track, the gate drags. That extra resistance burns up the capacitor in the operator and trips the overload. We clear the track, set the rollers, and check the rack and pinion mesh so the motor isn’t fighting the gate.
Operator and Limit Switch Testing
On a sliding gate that stops randomly, we check the limit switch adjustment first, then the photocell alignment, then the operator’s capacitor. On FAAC and DoorKing units, we run the full reversal test to confirm the gate stops and reverses when it meets resistance. That’s not optional. It’s UL 325 compliance, and it matters on a gate that could close on a car or a kid.
Wrought Iron Gate Repair in New Braunfels
Wrought Iron Gate Repair in New Braunfels usually means fixing a sagging swing gate, and the cause here is rarely bad welding. The post footings sit in clay that swells and shifts. When one post leans even a half inch, the gate drops enough to drag on the latch side. We straighten or re-set the post, re-hang the gate on new hinges, and patch any cracked welds or rusted sections. Then we test the swing arc and the closer so it latches without slamming.
Typical wrought iron gate repairs in New Braunfels run $220 to $580. Re-hanging a sagging gate with new hinges is on the lower end. Re-setting a post footing, welding a cracked stile, or replacing rusted lower rails pushes toward the upper end. We quote the full number up front, parts and labor, no separate surprise line items.
Sagging Gate Re-Hang
We lift the gate, check the post with a level, and re-shim or re-pour the footing as needed. New bearing hinges take the load off the post so it doesn’t sag again in the next wet cycle.
Rust Repair and Reinforcement
New Braunfels humidity and storm runoff accelerate rust at the bottom rail and hinge plates. We grind out the rust, weld in reinforcing stock, and repaint with a rust-inhibiting primer matched to your gate’s finish. The repair is structural, not cosmetic.
Trusted Brands We Service in New Braunfels
We’re factory-familiar with nine major gate opener brands, and for New Braunfels homes the most common units are Viking, Ghost Controls, DoorKing, and Elite. Our techs carry common parts for these brands on the truck, so a bad control board, capacitor, or limit switch often gets fixed the same trip. If your operator flashes an error code after a storm, call (903) 417-0793 and describe what the lights are doing. A live person answers and can usually tell you whether it’s a simple reset or a service call.
Common Gate Repair Problems We See in New Braunfels Homes
- Post footing shift from expansive clay. Heavy spring rains in the Comal County soil swell the clay and move posts. A gate that was level in April can drag by June.
- Loop detector false triggers from lawn runoff. Moisture seeping into the loop wire or connection causes gates that open randomly or refuse to close. We re-test and re-seal the loop wiring.
- Solar gate opener battery failure after overcast weeks. Prolonged cloudy stretches after storms leave solar-powered openers with dead batteries. We test the panel output and replace the battery if it won’t hold a charge.
- Photocell misalignment from wind and gate sag. When a gate sags even slightly, the safety photocell beams drift out of alignment. The gate won’t close, or it reverses for no visible reason.
Pricing for Gate Repair in New Braunfels, TX
Most gate repairs in New Braunfels fall between $165 and $480. A simple limit switch adjustment or photocell realignment is at the low end. Re-hanging a sagging wrought iron gate runs $220 to $380. Sliding gate track and rack work runs $190 to $420. Re-setting a shifted post footing or replacing an operator control board runs $380 to $680. The price you’re quoted is the price you pay. Written estimate before work starts, every time, and the 365-Day Done Right Promise covers every repair: if it fails within a year, we return free.
We Also Serve Cities Near New Braunfels
Beyond New Braunfels proper, our Gate Repair in New Braunfels team covers Seguin, San Marcos, Cibolo, and Schertz. If you’re just outside the city line, call (903) 417-0793 and we’ll confirm coverage and get a tech on the schedule.
Serving New Braunfels, TX - Our Local Coverage Area
We’re based in the New Braunfels area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in New Braunfels
The most common reason is post footing movement from Comal County’s expansive clay soil. Rain swells the clay, shifts the post, and the gate binds or the limit switch trips. We re-level the gate and re-anchor the post, then test the full opener cycle. Call (903) 417-0793 and describe what the gate does after rain; we can usually narrow it down over the phone.
Automatic gates must meet UL 325 standards, which require a working safety photocell or contact edge that stops and reverses the gate when it meets resistance or breaks the beam. Every repair we do includes a reversal test, and we’ll flag any gate that doesn’t meet the standard. We won’t leave a gate operating without compliant safety devices.
Most repairs take 60 to 90 minutes on site, including the safety test. Jobs requiring a post footing re-pour need cure time before the gate can be re-hung. We’ll give you a clear timeline before work starts and a trackable arrival window so you’re not waiting around.
Yes, sagging is the most common wrought iron repair we do in New Braunfels. We lift the gate, correct the post alignment, install new bearing hinges, and weld any cracked or rusted sections. Typical cost is $220 to $580 depending on how far the post moved.
Yes, LiftMaster and FAAC are two of the nine brands we service, along with Viking, Ghost Controls, DoorKing, Elite, BFT, Linear, and Mighty Mule. We carry common parts for these units and can usually diagnose the problem from the error code or light pattern. Call (903) 417-0793 for a free estimate over the phone.
If your gate is stuck, sagging, or refusing to close in New Braunfels, call Calder Gate Repair at (903) 417-0793. A live person answers, you’ll get a written price before work starts, and the 365-Day Done Right Promise means we stand behind the repair. Free estimates, real arrival times, and no surprises on the invoice.
Written by Nico Alvarez, owner of Calder Gate Repair, serving New Braunfels and the surrounding Comal County area.