Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Palm Beach
Gate repair in North Palm Beach usually means corrosion, not a bent wheel. The onshore salt air near the Intracoastal and the canals attacks hinge posts, welds, and operator boards years before the same parts fail inland. Most jobs we see are salt-driven: a sagging gate from a rotted post footing, a LiftMaster board with corrosion on the terminals, or a keypad that shorts after two wet seasons. Calder Gate Repair sends a background-checked, uniformed technician to North Palm Beach with the parts to fix it, a written price before any work starts, and a live arrival time you can track. Call (903) 417-0793 and a real person answers, 24/7.
Key Takeaways:
- Most gate repairs in North Palm Beach run $180 – $340, with hinge and post rebuilds closer to $450 – $900.
- Every job includes a written price before work starts, a written 365-Day Done Right Promise, and a free second visit if the repair fails.
- We stock stainless hardware and marine-spec parts locally for North Palm Beach’s salt environment.
- Technicians are factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Why Calder Gate Repair Is North Palm Beach’s Preferred Gate Repair Company
Most North Palm Beach callers find us because a gate stopped working near the water and a generic handyman quoted a new opener without touching the post. Our Gate Repair team approaches it differently. We trace the failure to the actual cause, which in North Palm Beach is usually salt-driven corrosion, not a bad motor. Nico Alvarez leads every job with the same rule: if the repair isn’t right within 365 days, we come back free. That’s not a slogan. It’s written on the invoice.
We coordinate dispatch from our South Florida office and crew locally, so North Palm Beach homeowners aren’t waiting on someone driving from across the state. The Relay Standard applies from booking to invoice: live arrival time, before-and-after photos, and a digital invoice you pay from a link. When we say a technician is on the way, you can see exactly where they are. No four-hour windows. No phone tag.
Metal Gate Repair in North Palm Beach
Metal gate repair in North Palm Beach is a different job than metal gate repair twenty miles inland. The salt film that settles on aluminum, wrought iron, and galvanized steel near the Intracoastal pits coatings, creeps under paint, and rots low-carbon steel fixings from the inside out. We routinely cut out rusted hinge barrels, replace post brackets with 316 stainless, and rebuild the lower gate rails where standing salt water pools after rain. A hinge and bracket repair runs $180 – $340; a full hinge post rebuild with a new footing in sandy subsoil typically runs $450 – $900.
Hinge and Post Rebuilds
On canal-front lots in the Village of North Palm Beach, the hinge post is usually the first thing to go. Salt wicks into the post base, swells the steel, and the gate starts to sag until the operator’s limit switch can’t keep it aligned. We remove the post, set a new footing in compacted base, and bolt the hinge side with stainless hardware. The gate has to plumb true before we touch any electronics.
Weld and Rust Repair
Coastal North Palm Beach properties often show rust at the bottom rail and at weld seams where the factory coating was thinnest. We grind the failed steel, re-weld with marine-rated rod where the section is structural, and coat the repair with a zinc-rich primer then a two-part topcoat. Painted steel gates on the Intracoastal side need this every few years, not once a decade.
Wood Gate Repair in North Palm Beach
Wood gate repair in North Palm Beach centers on moisture and UV, not salt alone. The same onshore air that pits metal also keeps wood damp and swollen through the hinge mortises. Cedar and mahogany gates near North Palm Beach’s canals and marinas pull hinge screws loose as the wood cycles between wet and dry. We re-mortise or through-bolt the hinge plates, square the frame, and reset the diagonal brace so the gate doesn’t rack. A realignment with hardware replacement runs $180 – $340, while a full frame rebuild with new stiles runs $400 – $800 depending on size and wood species.
Hinge and Latch Reset
The first sign is a gate that drags on the latch side or won’t hold the magnetic lock. We reset the hinges, replace stripped screws with stainless through-bolts, and adjust the latch alignment so the gate closes without hip-checking it. On heavier hardwood gates, we add a third hinge if the weight demands it.
Frame and Panel Repair
When the bottom rail rots out, the gate frame loses its square and the operator has to push harder to move it, which burns out motors over time. We cut out the rotten section, sister in pressure-treated or marine-grade stock, and reassemble the panel before it falls off the hinges entirely.
Trusted Brands We Service in North Palm Beach
North Palm Beach homes run a mix of brands: Linear and DoorKing on older swing gates in the Village, Ghost Controls on newer DIY-installed solar operators, Viking on heavy commercial-style estate gates. We are factory-familiar with all of them plus LiftMaster, FAAC, BFT, Elite, and Mighty Mule. That matters when salt corrosion has chewed a control board and you need a board swapped and reprogrammed, not a whole new opener sold to you. We stock common remotes, safety edges, and photocells for local North Palm Beach callouts, so most repairs finish in one visit.
Common Gate Repair Problems We See in North Palm Beach Homes
- Rusted hinge posts and post footings near the Intracoastal. Salt spray and canal humidity wick into the post base, the gate sags, and the limit switch starts tripping mid-travel. We fix the post first, then the electronics.
- Corroded operator control boards on LiftMaster, FAAC, and BFT units. Marine air shortens board life dramatically. Intermittent no-open / no-close faults are often just salt bridging the terminals, not a dead motor.
- Degraded safety photocells and buried loop detectors. Salt film clouds photocell lenses and corrodes loop wire connections. The gate phantom reverses or refuses to close because the entrapment protection is failing.
- Sagging gates from sandy soil shifting the post footing. North Palm Beach’s sandy base settles after heavy storms, especially on canal-front lots. A gate that was true in May can bind by September.
Pricing for Gate Repair in North Palm Beach, FL
Most gate repair callouts in North Palm Beach run between $180 and $340 before parts. That covers hinge replacement, bracket work, limit switch adjustment, photocell replacement, and most opener troubleshooting on LiftMaster, FAAC, BFT, Linear, and Ghost Controls units. Hinge post rebuilds with a new concrete footing run $450 – $900 depending on post size and access. Full metal or wood gate frame rebuilds land between $400 and $900, and control board replacement with reprogramming typically sits at $250 – $550 including the board. Every price is written down and agreed before we start. The invoice matches the quote. Call (903) 417-0793 and we’ll give you a free estimate over the phone, or schedule a site visit for an exact number.
We Also Serve Cities Near North Palm Beach
Our technicians cover North Palm Beach and the surrounding coastal communities, including Palm Beach Gardens, Palm Beach, West Palm Beach, and Jupiter. If your gate is acting up and you’re anywhere in the northern Palm Beaches, call (903) 417-0793 and we’ll get you scheduled.
Serving North Palm Beach, FL - Our Local Coverage Area
We’re based in the North Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in North Palm Beach
North Palm Beach sits in a near-constant onshore salt spray, and canal-front or Intracoastal-facing lots get the worst of it. Salt film pits galvanized coatings within a few seasons, then the base steel swells and cracks the paint from underneath. The hinge post is the lowest point, so water and salt wick into the footing joint and rot it from the base up. Inland gates fail from mechanical wear first; here, corrosion kills the post before the hinge ever wears out. Call (903) 417-0793 if your gate is starting to sag, and we’ll quote the fix before any work starts.
Almost always the post. A sagging gate on a North Palm Beach canal-front lot means the post footing or the buried post section has deteriorated, usually from salt. We dig out the old footing, reset the post in compacted base with a proper concrete pour, and re-hang the gate with stainless hardware. Patching the panel without fixing the post is a temporary fix that fails again within a season. Free estimates: (903) 417-0793.
Salt air corrodes the control board terminals, the board’s relay contacts, and the keypad or card reader wiring. You see intermittent faults: the gate opens but won’t close, or trips the breaker sporadically. On LiftMaster, FAAC, and BFT units, we often find a white salt crust on the board edge. The fix is cleaning and resealing the enclosure, replacing corroded connectors, and swapping the board if the corrosion is deep. We did exactly this at a Village of North Palm Beach canal-front home where a LiftMaster slide operator kept tripping mid-travel: fixed the corroded hinge post and post footing first, then replaced rusted bracket fixings with stainless, resealed the board enclosure, and the gate ran clean. Call (903) 417-0793 for a quote.
Yes. Under UL 325, every automatic gate in North Palm Beach must have functioning entrapment protection: safety photocells that detect an obstruction and reverse the gate, plus either a buried loop detector or edge sensors. Salt film and coastal humidity degrade both. A cloudy photocell lens or corroded loop wire means the gate won’t hold open or reverses for no reason, and it stops meeting code. We test the photocells and loop on every automatic gate repair, not just the opener. Call (903) 417-0793 and we’ll verify your entire safety system.
316 stainless steel. Not 304, not hot-dipped galvanized, not painted mild steel. 316 stainless is what we use on every hinge, bracket, and fastener near the Intracoastal because it resists the chloride pitting that destroys lesser stainless within a few years. For gate frames, powder-coated aluminum or galvanized steel with a zinc-rich primer and marine two-part topcoat outlasts painted steel by a factor of three. We stock 316 stainless hardware for North Palm Beach callouts so we’re not ordering parts while your gate sags. Call (903) 417-0793 for an exact quote, free.
Call Calder Gate Repair in North Palm Beach
If your gate is sagging, rusting, or refusing to open, call Calder Gate Repair at (903) 417-0793. A live person answers, day or night. We’ll give you a written price, a trackable arrival time, and a real 365-Day Done Right Promise on every repair. If it fails within the year, we come back free. That’s the deal in North Palm Beach, and it’s been the deal since 2009.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving North Palm Beach and the surrounding Palm Beaches. Calder Gate Repair is part of the Relay Home Co. family, founded 2009.