Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pasadena
A broken gate in Pasadena usually comes down to one of three things: a worn opener motor, a hinge post that has shifted, or a safety sensor that has drifted out of alignment. Most repairs we handle are completed in a single visit, and every job starts with a written price before we turn a single bolt. If your gate won’t open, won’t close, or sounds like it’s grinding metal on metal, call Calder Gate Repair at (903) 417-0793 and a live person will answer, day or night.
We work all over Pasadena, from the tree-lined streets of Bungalow Heaven to the hillside driveways off Linda Vista Avenue and the gated properties near the Rose Bowl. Our crews know the local housing stock: Craftsman-era walls, mid-century ranches, and newer hillside builds all present different gate challenges. We’re the dedicated gate repair team inside the Relay Home Co. family, founded in 2009, and we’ve built our reputation on showing up when we say we will and quoting a price that does not change at the door.
Why Calder Gate Repair Is Pasadena’s Preferred Gate Repair Company
Pasadena homeowners call us because we treat gate repair as its own trade, not a side job. Every technician on our team is background-checked, uniformed, and trained across nine major opener brands including LiftMaster, FAAC, Viking, Ghost Controls, and Mighty Mule. That matters when your gate uses a brand-specific control board or a limit switch (the small sensor that tells the gate when to stop) that needs matching parts.
We answer the phone with a real person 24/7. You’ll get a live, trackable arrival time before we dispatch, not a four-hour window. Once on site, the technician diagnoses the problem, writes the price down, and only starts work after you approve it. The invoice you pay from a link afterward matches that written quote exactly. That’s The Relay Standard, and it’s how every Pasadena job runs.
Our local reputation is built on jobs like the Craftsman bungalow near Bungalow Heaven where a LiftMaster operator would run a few inches and reverse. The gate panel itself moved freely, but the hinge post had cracked at the footer, throwing the operator’s limit arm out of alignment. We poured a deeper post footing, re-hung the gate, and reset the operator’s travel limits and safety photocell. The gate has cycled cleanly since. That kind of root-cause repair is what we do, and it’s backed by our 365-Day Done Right Promise: if the repair fails within a year, we return at no charge.
Wrought Iron Gate Repair in Pasadena
Wrought iron gate repair in Pasadena is usually about the frame and the post, not the scrollwork. The city’s older neighborhoods, from Bungalow Heaven to the estates along South Orange Grove Boulevard, are full of handsome iron gates that have decades of Pasadena sun and soil movement behind them. What homeowners first notice is often a sagging gate panel, but the actual cause is frequently the hinge post or its footing, which has shifted after years of heavy gate cycles. On these jobs we assess the post first, then the hinges, then the gate leaf itself, and we write the price before any repair begins. Most wrought iron repairs in Pasadena run from $180 to $450 for hinge replacements and realignment, with post footing work typically running $350 to $900 when excavation and new concrete are required.
Hinges and Post Footings
When a wrought iron gate sags in Pasadena, the hinge post has often cracked at the footer or pulled away from an older masonry wall. We re-set the post in a deeper footing, add new heavy-duty hinges, and re-align the gate leaf so it swings without dragging. This is the repair that actually lasts, because it addresses the load path instead of just lifting the panel.
Rust and Weld Repair
Pasadena’s dry summers may slow rust, but coastal moisture that pushes inland in winter and sprinkler overspray still take a toll. We cut out corroded sections, weld in matching steel, grind the seams, and prime the repair so it’s ready for paint. Repairs on rust-damaged iron gate frames in Pasadena typically run $250 to $600, depending on how much material has to be replaced.
Metal Gate Repair in Pasadena
Metal gate repair in Pasadena covers everything from steel driveway gates to aluminum pedestrian gates and chain-link gates on older hillside lots. The common thread across Pasadena’s housing stock is that many metal gates have been retrofitted with modern openers but were never engineered for the torque those motors apply. A LiftMaster or FAAC operator bolted onto a masonry post that was built before automatic openers existed can crack the mount over time. We see this most often on the hillside homes near San Rafael and up along the Arroyo Seco. Typical metal gate repair jobs in Pasadena run $160 to $380 for hinge and latch work, and $300 to $750 when a post or mount needs to be re-engineered.
Post Repair and Remounting
When an operator mount cracks a metal or masonry post, tightening the bolts won’t help. We remove the operator, repair or rebuild the post, and remount the unit with proper backing plates so the load spreads evenly. This is a job where writing the correct price requires being on site, but you will see that price before work starts, and it will not change.
Gate Realignment and Latch Work
A metal gate that drags on the driveway or won’t latch is a safety and security problem. We correct the alignment at the hinges, adjust the latch and catch, and re-test the full opening and closing cycle, including the safety reverse and photocells. Realignment and latch repair in Pasadena typically runs $140 to $320.
Trusted Brands We Service in Pasadena
Our technicians are factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means when a Pasadena customer has a Viking swing gate operator that reverses a few inches after closing, we know the exact limit switch and control board adjustments to check. When a Ghost Controls opener on a Bungalow Heaven gate won’t hold its travel limits, we can re-program it on the spot. We keep common parts stocked for fast turnaround, and for less common boards we can usually source the part locally or order it with clear timing on when your gate will be back in service.
Common Gate Repair Problems We See in Pasadena Homes
- Sagging gate panels blamed on the gate itself. In older Pasadena neighborhoods like Bungalow Heaven and the streets around Caltech, the real issue is usually the hinge post or its footing. Lifting the panel without fixing the post is a temporary fix that fails again within months.
- Cracked operator mounts on masonry posts. Many Craftsman-era front-yard walls were never built to handle the torque of a modern opener. We regularly see LiftMaster and FAAC units pulling away from cracked brick or stucco post caps, especially on hillside properties near the Arroyo.
- Safety photocells blocked or misaligned. Landscaping grows fast in Pasadena’s warm climate, and swing gate photocells often get blocked by shrubs, vines, or jasmine planted too close to the gate path. A gate that won’t stay closed or reverses for no obvious reason often has a sensor that is simply dirty or knocked out of line.
- Limit switches out of adjustment after a repair. The limit switch is the small sensor that tells the gate when to stop. When another contractor works on the gate panel or a post and does not re-set the travel limits, the gate may reverse after a few inches or slam at the end of its travel. This is one of the most common follow-up calls we handle in Pasadena.
Pricing for Gate Repair in Pasadena, CA
Gate repair pricing in Pasadena is straightforward, and we put it in writing before any work starts. A basic hinge adjustment or latch repair typically runs $140 to $320. Wrought iron gate repairs with weld work and rust remediation run $250 to $600. Hinge post footings, where excavation and new concrete are needed, typically run $350 to $900. Full operator replacements, when a motor or control board has failed beyond repair, often fall between $750 and $1,800 with parts. The price we quote at the door is the price on the invoice, and if the repair fails within 365 days, our Done Right Promise brings us back at no charge. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near Pasadena
Beyond Pasadena, our Gate Repair team serves homes in San Marino, South Pasadena, Altadena, and San Gabriel. Whether your property is a Craftsman bungalow in Pasadena or a mid-century ranch in Altadena, give us a call and we’ll dispatch a technician with a live arrival time you can track.
Serving Pasadena, CA - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pasadena
Usually not. In Pasadena’s older neighborhoods, the hinge post or its concrete footing is the more likely culprit, and the gate panel is just along for the ride. We check the post and footing first, then quote you a written price for whatever is actually failing. Call (903) 417-0793 to schedule a diagnosis.
Yes. Every repair we complete in Pasadena includes a full safety function test: photocell alignment, safety edge operation, and reversal pressure. It’s not an add-on. It’s part of the job, and it’s part of the written guarantee you receive with every repair.
Most hinge, latch, and alignment repairs are completed in one visit, often the same day you call when schedule allows. Post footing replacements and heavy weld work may take a second visit to allow concrete and primer to cure. We’ll give you a clear timeline before any work starts, at the same time we hand you the written price.
That symptom usually points to a misaligned limit arm, a shifted hinge post, or a safety photocell that is blocked or out of line. We diagnose all three possibilities on site, fix what’s actually wrong, and re-test the full cycle. Call (903) 417-0793 and we’ll get a technician to your Pasadena home.
We repair the gate itself, not just the operator. That includes wrought iron frames, steel driveway gates, aluminum pedestrian gates, hinge posts, footings, latches, and weld and rust repair. If your gate is solid but the opener failed, we handle that too, across nine major brands.
Call Calder Gate Repair for Gate Repair in Pasadena
If your gate is sagging, reversing, or refusing to move, call Calder Gate Repair at (903) 417-0793. A live person answers 24/7, and you’ll get a written price before any work begins. Every repair carries the 365-Day Done Right Promise: if it fails within a year, we come back at no charge. That’s how we work in Pasadena, on every street, every property, every time.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Pasadena and the surrounding communities.