Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Paterson
Gate repair in Paterson is usually a hinge post problem, not a gate panel problem. Most calls we take in Paterson involve a swing gate that has started dragging or sagging because the post set into old concrete has shifted. A typical repair runs $220 – $480 for post reset and realignment, and we can usually have a technician to most Paterson neighborhoods within a couple of hours. Call (903) 417-0793 and we’ll give you a written price before anything gets touched.
We know Paterson because we work here every week, from the tight shared driveways off Straight Street to the brick rowhouse blocks near Eastside Park. Older concrete, narrow clearance, spliced underground wiring – these are the conditions that shape most gate failures in this city, and they’re the reason local experience matters more than a generic national call center.
Calder Gate Repair is a gate repair specialist inside the Relay Home Co. family, and every job comes with three things in writing: the price, the guarantee, and the promise that if the repair fails within 365 days, we come back free.
Why Calder Gate Repair Is Paterson’s Preferred Gate Repair Company
Paterson homeowners call us because we answer the phone and then we show up on time. That sounds basic, but in a city where lots of home service companies route you to voicemail and a four-hour window, it sets us apart. A live person answers every call 24/7, books your appointment, and gives you a trackable arrival time so you’re not stuck at home for an afternoon. That’s the Relay Standard: live arrival time, before-and-after photos, and a digital invoice you pay from a link.
Our technicians are background-checked, uniformed, and trained on nine major opener brands, including FAAC, BFT, Linear, and Viking. When we dispatch to Paterson, the tech already knows the city’s housing stock: two- and three-family homes with narrow shared driveways, older brick walls, and gate posts set into concrete that has been there since the Eisenhower administration. That local context changes how we diagnose and repair, which is why Paterson customers keep our number saved.
Nico Alvarez leads our repair crews, and he pushes one standard: if it’s not done right, we do it again free. That’s the 365-Day Done Right Promise, and it’s stated in writing on every invoice.
Driveway Gate Repair in Paterson
Driveway gate repair in Paterson almost always starts with the post, not the panel. The city’s older two- and three-family homes share narrow driveways cut between brick buildings, and the hinge post is usually set into old concrete rather than a fresh footing. When that post shifts, the gate sags, drags, or stops closing fully. We reset the post, pour a new footing when needed, weld the hinge bracket, and realign the gate so it swings clean.
A typical post reset and realignment runs $220 – $480, depending on whether we need to break and pour new concrete. Opener-related repairs – limit switches, gearboxes, receiver boards – usually fall in the $180 – $350 range before parts. The price is written down before any work starts, and the number on the invoice is the number you agreed to.
Post Footings and Realignment
When a swing gate drags on the driveway, the panel is rarely bent. The real issue is almost always the post footing. We break out the old concrete, set new anchors, and pour a fresh footing that holds the post square under the gate’s full weight.
Swing Arm and Opener Repair
Narrow shared driveways leave little room for the gate’s arc, and the swing arm operator takes abuse. We replace stripped gears, adjust the open/close limits, and reset the safety photocells so the gate stops and reverses properly every time.
Gate Welding in Paterson
Gate welding in Paterson is a repair that often saves a homeowner $1,500 or more versus a full replacement. Older steel gates and iron gates throughout the city’s aging housing stock crack at the corner joints, hinge points, and along the bottom rail where rust takes hold. We cut out the cracked section, weld in new steel, grind the joint smooth, and prime it so the repair blends into the original frame.
A typical weld repair runs $150 – $400 depending on the crack’s length and location. If the frame is too far gone at the hinge point, we’ll tell you straight, and it may cost less to replace the leaf than to patch it repeatedly. You’ll get the written price before we fire up the welder.
Hinge and Bracket Welding
Hinge brackets carry the gate’s full weight, and on a shared Paterson driveway, they take hits from cars, delivery trucks, and snow plows. We weld cracked brackets, reinforce worn hinge points, and remount the gate leaf square to the post.
Rust Repair and Frame Patching
Salt air from the Passaic River and decades of Paterson’s freeze-thaw cycles work on steel gates until the bottom rails rot from the inside. We cut out rusted sections, weld in fresh steel plate, and apply a rust-inhibiting primer so the repair holds through the next winter.
Trusted Brands We Service in Paterson
Our technicians are factory-familiar with the openers Paterson homeowners actually have. We see a lot of FAAC and BFT swing arm operators on the city’s older shared driveways, plus Linear and Viking units on newer slide gate installs. We stock common boards, gearboxes, safety photocells, and remote controls for those brands locally, so a repair usually means one visit, not two weeks of waiting on a backordered part. If your gate opener makes noise but won’t move, or moves a foot and reverses, we’ll identify the bad component and fix it in place.
Common Gate Repair Problems We See in Paterson Homes
- Hinge posts set in old, cracked share-driveway concrete. This is the single most common failure in Paterson. The post shifts, the gate sags, and tightening the hinges does nothing because the footing itself is moving.
- Slide gates boxed in by narrow driveways. When a shared driveway leaves no room for a swing arc, slide gates get installed, but then the safety photocells get knocked out of alignment by cars squeezing past.
- Corroded splice wiring for keypads and loop detectors. Older brick and stucco walls mean entry wiring gets spliced and buried along short runs. Water seeps in, corrosion kills the connection, and the operator drops offline.
- Gates that reverse before fully closing. That’s usually the entrapment sensor doing its job, but with a worn gear rack or blocked photocell. We check the whole safety circuit rather than blaming the motor.
Pricing for Gate Repair in Paterson, NJ
Here’s what Paterson homeowners should expect to pay for common repairs: hinge post reset and realignment, $220 – $480. Opener board or gearbox replacement, $180 – $350 before parts. Safety photocell replacement and alignment, $120 – $220. Weld repair on a cracked gate frame, $150 – $400. Full opener replacement with new safety edges and entrapment testing, $900 – $1,600 installed. Every estimate is free, written down, and agreed before the first bolt is turned, so the invoice never surprises you.
Call (903) 417-0793 for an exact quote on your gate in Paterson.
We Also Serve Cities Near Paterson
Our Gate Repair crews serve the wider North Jersey corridor, including North Bergen, Union City, Newark, and Jersey City. If you’re just outside Paterson, call and ask, the worst answer is directions. For everything we do in this city specifically, see our full Paterson coverage.
Serving Paterson, NJ - Our Local Coverage Area
We’re based in the Paterson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Paterson
Most of the time, yes, but the installer has to measure the actual clearance before ordering anything. On narrow shared driveways, a swing gate often needs to open inward or be mounted on a compact swing arm rather than a full operator post. We’ll measure and quote it free, and the written price covers whatever mounting configuration is needed. Call (903) 417-0793 for a free measure.
Because the problem is the footing under the post, not the hinge bolts. In Paterson’s older two- and three-family homes, hinge posts are often set into concrete poured decades ago, and once it cracks, the post shifts and the gate sags no matter how hard you tighten anything. The fix is pulling the post, pouring a new footing, and remounting the gate square.
We test the safety features on every repair. That means the entrapment reversal, the photocell alignment, and the force settings get checked and adjusted before we call the job done. A gate that closes on a car or a person is not fixed, and we don’t leave jobs in that condition.
We service FAAC, BFT, LiftMaster, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers. That covers nearly every gate opener a Paterson homeowner is likely to own, from old swing arm units on shared driveways to newer slide operators on commercial lots.
We can weld most cracked frames and rusted sections. If the metal around a hinge point is too thin to hold a weld, replacement is the honest recommendation, and the price difference is usually small on sections of old steel gate. We’ll show you the crack, explain the options, and quote both paths in writing before you decide.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Paterson with written prices and a 365-day guarantee on every job.