Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Duncanville, TX
Gate repair in Duncanville, TX almost always comes down to two things: the north Texas heat and the particular mix of homes here. Calder Gate Repair handles both. We work on swing gates, slide gates, and the openers that drive them, and we do it with a written price before any work starts, a real arrival time you can track, and a 365-Day Done Right Promise on every job. If your gate isn’t opening, is grinding, or stopped responding to the remote, call us at (903) 417-0793 and a live person answers, day or night.
Why Duncanville Homes Are Different
Duncanville sits on the southern edge of Dallas County, and the gate work here reflects that geography. The soil is the classic Blackland Prairie clay: it expands hard in wet springs and contracts through long dry summers. Gate posts set even slightly off-level shift over time, and a gate that swung fine in March can drag by August. We see that cycle every year in neighborhoods like Greenbriar, Ten Mile Creek, and the older streets off Main. Heat is the other constant. August temperatures push past 100°F regularly, which accelerates wear on opener circuit boards, capacitors, and the plastic gears inside residential operators. A LiftMaster that lasted eight years in a milder climate may need a gear replacement at year five in Duncanville. The housing stock matters too: many properties here run larger driveway gates with steel frames and aluminum pickets, and a fair share are on hills or long sloped drives where a gate has to work harder against gravity. That means limit switches, the small sensors that tell the gate when to stop, get exercised more and fail sooner. None of this makes Duncanville work impossible; it just makes local experience worth more than a generic gate company that treats every city the same.
Our Main Duncanville Services
Duncanville homeowners call us most often for gate repair and gate opener repair. Electric gate repair is the third piece, and each of these has its own dedicated page with pricing, timelines, and what to expect.
Gate Repair in Duncanville
A gate repair in Duncanville usually starts with one visible symptom: the gate sags, drags, won’t latch, or makes a sound like nails on a chalkboard. Underneath, we’re checking the hinges, the wheel or roller track, the post anchors, and the frame welds. Duncanville’s clay soil means post movement is often the root cause, and a repair that only replaces a hinge without addressing the post just comes back. We quote the fix in writing before touching a bolt, and our technicians arrive in uniform with a live arrival time you can track. For the full rundown on what gate repair covers and what it costs here, see our Gate Repair in Duncanville page.
Electric Gate Repair in Duncanville
Electric gate repair covers everything from a keypad that won’t accept the code to a gate that opens but won’t close, or that trips the breaker every time it cycles. In Duncanville, we see extra heat-related failures in the summer months: capacitors dry out faster, and control boards that sit inside metal housings bake. Brandon Alvarez’s crews carry the common parts for FAAC, BFT, and Linear systems so many calls become one-visit fixes. All wiring and safety edge work is done by a trained technician, not a guess. Electric work carries real risk, and we don’t hand out DIY instructions for line voltage or photo eye realignment. Get the full scope on the Electric Gate Repair in Duncanville page.
Gate Opener Repair in Duncanville
When the opener fails, the gate usually still swings or rolls by hand; it just won’t move itself. That’s an opener problem. We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers, and in Duncanville we frequently replace stripped plastic drive gears, burned control boards, and dead capacitors on LiftMaster and Mighty Mule residential units. The fix is often under $400 total, which beats the $800 – $1,200 cost of a new opener and installation. Our Gate Opener Repair in Duncanville page breaks down brand-by-brand pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Duncanville
We’re factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our trucks stock the most common Duncanville repair parts for these brands, so most opener repairs happen in a single visit. See the full lineup on our brands page.
Pricing for Gate Company in Duncanville, TX
| Service | Typical range in Duncanville |
|---|---|
| Gate opener repair | $180 – $380 before parts |
| Gate opener replacement | $750 – $1,200 installed |
| Electric gate repair | $200 – $450 before parts |
| Control board replacement | $300 – $650 |
| Keypad replacement | $120 – $250 |
| Safety sensor replacement | $110 – $230 |
| Gate wheel or roller replacement | $120 – $275 |
| Hinge replacement (steel gate) | $150 – $300 |
| Gate post re-level (clay soil) | $250 – $600 |
| Gate opener gear replacement | $140 – $280 |
| Remote or receiver repair | $85 – $160 |
| Full gate inspection | $75 – $150 |
What pushes price up in Duncanville is usually post movement from the clay soil and heat-related component failures that require a board swap rather than a small part. Whatever the number is, it’s the number you approve in writing before any work begins, and it never changes at the door.
Neighborhoods We Serve in Duncanville
We run calls all over Duncanville, from the older established blocks near Main and Center Street to the newer builds on the east side. Response from first call to a trackable arrival time runs fast because our dispatch is local to Dallas-Fort Worth and we keep trucks routing through the area daily.
- Greenbriar
- Ten Mile Creek
- Fairmeadows
- The Woods
- Older Main Street corridor
Service Area – Cities Near Duncanville
Our Duncanville crews also cover the surrounding south Dallas County cities. If you’re in DeSoto, TX, Cedar Hill, TX, Lancaster, TX, or Grand Prairie, TX, call the same number and we’ll route a technician to you with the same written-price promise and live arrival tracking.
Serving Duncanville, TX - Our Local Coverage Area
We’re based in the Duncanville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Duncanville
Most Duncanville calls are answered live at the moment you call, 24/7, and our dispatch is local to the Dallas-Fort Worth area. You get a real, trackable arrival time, not a four-hour window. Same-day service is common for repair and opener calls. Call (903) 417-0793 and we’ll give you a straight answer on when a technician can be there.
Most gate repairs, opener replacements, and electric gate work in Duncanville don’t require a city permit, since they’re repairs to existing structures rather than new construction. If a post has to be re-set or the gate is part of a new installation, Duncanville’s code office may want to see the nameplate opener and safety edge specs. We’ll tell you before we start whether a permit applies to your job.
Yes, our electric gate repair and opener work includes the low-voltage wiring, safety edge installation, and photo eye setup on existing gates in Duncanville. Line-voltage electrical connections are done to current code by trained technicians, and we include a written guarantee on the repair. Call (903) 417-0793 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Duncanville Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.