Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Malibu, CA
Gate problems in Malibu hit differently than they do inland. Salt air corrodes hinges and circuit boards faster, canyon properties with long driveways strain openers that get cycled dozens of times a day, and a gate stuck open on Pacific Coast Highway is a bigger problem than a gate stuck open on a quiet cul-de-sac. Calder Gate Repair handles all three core services in Malibu: mechanical gate repair, electric gate repair, and gate opener repair. Every job starts with a written price before work begins, and every repair carries our 365-Day Done Right Promise. If something fails within a year, we come back at no charge. Call (903) 417-0793 and a live person answers, day or night.
Why Malibu Homes Are Different
Malibu’s housing stock spans everything from 1960s beach cottages to gated estates in the hills above Point Dume. That variety means we work on gate systems that are 40 years old and gate systems installed last year, and they fail for different reasons. Older Malibu gates tend to have rusted hinge posts and worn mechanical parts. Newer ones lean on circuit boards and sensors that do not love the marine layer. Either way, the salt air is the common thread. We regularly replace corroded limit switches on gates that sit within a mile of the water, and we see more photo-eye sensor failures in Malibu than in any inland community we serve.
Terrain matters too. Many Malibu driveways climb steeply from PCH or from canyon roads like Malibu Canyon and Latigo Canyon. A gate opener that is undersized for a 30-foot incline will chew through gears and burn out motors in half the expected lifetime. When a Malibu gate fails on an incline, it is often because the opener was never sized for the grade in the first place. We correct that, not just patch it.
Permits and HOAs are also part of the picture. Some Malibu neighborhoods have strict HOA requirements for gate appearance and hardware, and we have learned to match finishes and styles rather than slap on whatever part fits. If the gate is within the coastal zone, certain modifications need coastal development approval. We will flag that before work starts, not after.
Our Main Malibu Services
Most Malibu callers reach us for one of two things: a gate that will not open or close, or an opener that stopped responding. The three service pages below cover exactly what we do for each.
Gate Repair in Malibu
This is the physical gate itself: hinges, posts, wheels, chain-link or steel frame damage, gates sagging or dragging on the ground. In Malibu we see a lot of rusted hinge posts from salt exposure, especially on beach-side properties. We also handle gates knocked off their track by wind or by delivery trucks backing in. You can read the full breakdown of mechanical Gate Repair in Malibu on its own page, including what a typical repair includes and what it costs.
Electric Gate Repair in Malibu
Electric gate repair covers the powered systems: control boards, wiring, power runs, safety sensors, and the motor that drives the gate. Malibu’s damp coastal air is hard on control boards, and we often find corrosion inside the panel before the gate stops working entirely. If you need the full scope of Electric Gate Repair in Malibu, that page lists the most common failures by brand and what we check first.
Gate Opener Repair in Malibu
Gate opener repair focuses on the operator unit itself: the swing-arm, slide operator, or linear actuator that moves the gate. In Malibu we replace a lot of worn internal gears and failing transformers on openers exposed to salt air year-round. For a deep dive on Gate Opener Repair in Malibu, including brand-specific behavior and what replacement costs look like, that page covers it all.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Malibu
We are factory-familiar with nine major gate opener brands, and Malibu homeowners tend to own a mix. Viking and DoorKing appear often on larger estate gates, while Ghost Controls and Elite show up on residential swing gates in neighborhoods like Point Dume and Malibu Park. Many common parts for these brands are stocked in our service vehicles, so repairs often finish same-visit or next-day. See the full list on our brands page.
Pricing for Gate Company in Malibu, CA
Prices below are what Malibu homeowners should expect for common gate repair sub-jobs. They include labor and standard parts unless noted. The final number is always written and agreed before we start.
| Service | Typical range in Malibu |
|---|---|
| Gate opener repair (labor) | $150 – $350 |
| Gate opener motor replacement | $300 – $800 |
| Circuit board replacement | $200 – $600 |
| Gate hinge replacement | $120 – $400 |
| Gate wheel or roller replacement | $80 – $250 |
| Photo-eye sensor repair | $90 – $250 |
| Limit switch replacement | $100 – $275 |
| Keypad replacement | $100 – $300 |
| Full gate opener installation | $900 – $2,500 |
Two things push Malibu prices toward the higher end of those ranges. The first is salt corrosion: a part that should be a quick swap sometimes requires cleaning or replacing the bracket that holds it. The second is terrain: gates on steep driveways need heavier-duty components, and those cost more. Whatever the price, you get it in writing before we turn a single bolt. The number on the invoice is the number you agreed to at the door. Always.
Neighborhoods We Serve in Malibu
Calder Gate Repair covers the full length of Malibu, from the beach side to the canyons. Our typical response window in Malibu is same-day or next-day for most repairs, with shorter turnarounds for emergency jobs like a gate stuck open on a major road. We work regularly in:
- Point Dume and Malibu Park
- Malibu Colony and the beach side along PCH
- Malibu West and the areas off Kanan Dume Road
- Big Rock and Las Flores Canyon
- Topanga and Malibu Canyon Road corridors
Service Area – Cities Near Malibu
Our Malibu crews also cover nearby communities along the coast and the 101 corridor. If you are outside Malibu proper, we regularly handle gate repairs in Agoura Hills, CA, Westlake Village, CA, Thousand Oaks, CA, and Calabasas, CA. Scheduling works the same anywhere: call, get a written quote, and know exactly when we will arrive.
Serving Malibu, CA - Our Local Coverage Area
We’re based in the Malibu area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Malibu
Most Malibu repairs are scheduled same-day or next-day. If your gate is stuck open and you cannot secure the property, call (903) 417-0793 and tell us it is urgent. We prioritize emergency calls and will give you a real arrival window when you book, not a four-hour guess.
Most gate repairs do not need a permit. Replacing a hinge, a circuit board, or an opener on an existing gate is straightforward. If the work involves structural changes or you are in the coastal zone, the rules get tighter. We will tell you before any work starts if your job needs permit review.
Many Malibu HOAs, especially in gated communities, have specific requirements for gate color, height, and hardware finish. We match what is already there and will flag anything that looks non-compliant before we install it. Bring us your HOA’s gate standards if you have them, and we will work within them.
If your gate is acting up in Malibu, do not wait for it to fail completely. Call Calder Gate Repair at (903) 417-0793. You will get a live person on the phone, a written price before any work starts, and the 365-Day Done Right Promise on every repair.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Malibu Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.