Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Mentone, CA
Most gate repairs in Mentone run between $180 and $780 depending on what failed, and a surprising number of them come down to one thing: the heat and dust working their way into the opener over time. We’re Calder Gate Repair, and we handle everything from a sluggish slide gate to an electric opener that quit mid-cycle. Every job gets a written price before we touch a bolt, a trackable arrival time, and a real person on the phone at (903) 417-0793 whenever you call.
Why Mentone Homes Are Different
Mentone sits just east of Redlands in the San Bernardino Valley, and the homes here lean hard into a specific profile: larger lots, older ranch-style builds, and gates that have been in place long enough to settle. The soil shifts with the seasons. Winter rains soften the ground, summer heat bakes it hard, and that cycle is rough on gate posts and track alignment. We regularly see gates in the Crafton and Greenspot Road areas where the post has drifted just enough to bind the wheel track, which then burns out the motor.
The other wildcard is the wind. Mentone gets the Santa Ana gusts funneling down Mill Creek Canyon, and a gate that faces the wash takes a beating. Wind load bends brackets, stresses hinges, and forces the opener to work against resistance it wasn’t designed for. That’s why a Mentone gate repair often means more than swapping a part. It means correcting the alignment so the next wind event doesn’t undo the fix.
Permits aren’t usually required for repairing an existing gate and opener, but if a post has to be re-set or the gate itself is being replaced, Mentone falls under San Bernardino County jurisdiction. We’ll tell you upfront if your job crosses that line, and we handle the paperwork so you don’t have to chase it.
Our Main Mentone Services
Most calls from Mentone homeowners are about one of three things: a gate that won’t open, a gate that opens on its own, or an opener that hums but doesn’t move. Here’s what each job looks like around here.
Gate Repair in Mentone
When we say gate repair in Mentone, we mean the structural side of the job. Bent hinges, sagging gates, broken welds, rotted post bases, wheels that skid instead of roll. The dry heat here does a number on wood gates especially, splitting panels and loosening hardware. We’ll square the gate, replace what’s worn, and make sure it travels cleanly on its track before we call the job done. See the full breakdown on our Gate Repair in Mentone page.

Electric Gate Repair in Mentone
Electric gate repair in Mentone usually starts with a volt meter and a long look at the control board. The fine dust that blows through this part of the valley gets into circuit boards and limit switches, and the summer heat shortens capacitor life. We test the full circuit, identify whether it’s a power supply, board, or safety sensor issue, and replace only what’s actually failed. Full details are on our Electric Gate Repair in Mentone page.

Gate Opener Repair in Mentone
When the opener itself is the problem, that’s gate opener repair. Maybe the motor spins but the gate doesn’t move. Maybe the gate travels halfway and reverses. Maybe the remote worked yesterday and doesn’t today. We carry parts for the most common opener brands on the truck, and because Mentone is a tight service area, we can usually diagnose and finish the job in a single visit. The specifics are on our Gate Opener Repair in Mentone page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Mentone
The openers we see most often on Mentone gates are Viking, Ghost Controls, DoorKing, and Elite, and we keep the common wear parts for each on the truck. That means most single-visit repairs don’t wait on a parts run. See the full list on our brands page.
Pricing for Gate Company in Mentone, CA
| Service | Typical range in Mentone |
|---|---|
| Service call & diagnosis | $59 – $89 |
| Gate opener repair (labor only) | $180 – $340 |
| Control board replacement | $250 – $450 |
| Limit switch replacement | $120 – $220 |
| Safety sensor repair or replacement | $110 – $200 |
| Hinge replacement (welded) | $180 – $320 |
| Track alignment (slide gate) | $160 – $300 |
| Gate wheel replacement | $90 – $200 |
| Opener motor replacement | $350 – $650 |
| Full opener install (new unit) | $640 – $1,650 |
What pushes a Mentone job toward the higher end is usually post settling or a gate that’s out of square, which means extra labor to correct before the new part goes in. Parts are priced separately and agreed to before they’re ordered. You get the written total before work starts, and that’s the number on your invoice.
Neighborhoods We Serve in Mentone
We run calls all across Mentone, from the properties near Highway 38 and Garnet Street to the homes off Greenspot Road and Crafton Avenue. Our techs stage from the Inland Empire office, so response times are short and dispatch doesn’t bounce around. Here’s a sample of the areas we cover:
- Mentone Center, near Mentone Boulevard and Highway 38
- Greenspot Road area
- Crafton Avenue corridor
- Mill Creek Canyon foothills
- South Mentone, off Opal Avenue
Plan on same-day service for most repair calls when you reach us before early afternoon. Diagnoses don’t wait for a parts order unless the part is rare.
Service Area – Cities Near Mentone
While this page is about Mentone, our crews also run regularly to the neighboring communities. If you’re in Redlands, CA just west of us, Yucaipa, CA to the southeast, Highland, CA up the hill, or Calimesa, CA further east, the same written-price and trackable-arrival guarantees apply. Call the same number and a live person books it.
Serving Mentone, CA - Our Local Coverage Area
We’re based in the Mentone area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mentone
Most Mentone calls are reached the same day, and a stuck-open gate is treated as a priority because it’s a security issue. We’ll give you a live arrival window when you book, and a real person tracks the tech’s location the whole way. Call (903) 417-0793 and we’ll tell you exactly when to expect us.
For repair work, usually not. Replacing like-for-like hardware doesn’t trigger a permit. But if your Mentone property is in an HOA-governed community, check your CC&Rs before changing gate style or height. We’ll flag any county permit needs on a full replacement before any work begins.
We stock common Viking, Ghost Controls, DoorKing, and Elite parts locally, and for older openers, we run a parts search before recommending a full replacement. If a new opener makes more sense, you’ll get two written prices: one for the unit and install, one for labor, both agreed to before anything is ordered. Call us for a straight answer on your specific unit.
If your gate is acting up anywhere in Mentone, call (903) 417-0793 and tell us what it’s doing. A live person answers, writes down the symptom, and gets a tech routed with a real arrival time. Written price first, always.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mentone Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.





Before
After
Before
After
Before
After