Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Camas, WA
Gate repair in Camas means working on properties that rarely sit flat. The hills above Lacamas Lake, the long driveways branching off NW Sierra Lane, and the newer builds up Prune Hill all put swing and slide gates to work on slopes, in wet clay, and against morning condensation for months at a stretch. Calder Gate Repair handles the full range: hinge work, opener diagnostics, electric troubleshooting, and panel replacement. Each of our three Camas services has its own page linked just below, with the pricing and local detail for that specific job. You can reach us at (903) 417-0793 any time.
Why Camas Homes Are Different
Most Camas gates live two lives: a wet one from October through May, and a dusty one from June through September. That pattern beats on the same parts every year. Condensation creeps into opener housings and limit switches. Rain saturates the ground under slide-gate posts, so a gate that tracked cleanly in August can drag by November when the soil swells. Then summer returns and the same gate grinds along bone-dry gravel until the rollers complain. We see this cycle constantly across the Lacamas Shores and Grass Valley areas, and we adjust for it rather than just replacing parts and hoping.
Terrain matters here too. A gate mounted on a driveway with a 6 percent slope works its motor harder on every cycle. The control board runs hotter, the battery backup charges unevenly, and photo-eye alignment drifts even when nothing looks broken. Homes along NW 16th Avenue and the terraces off Crown Road are particular examples, but it shows up everywhere between the river and the highlands. Camas also has several HOAs that enforce gate height, material, and finish standards, so we always confirm what is allowed before recommending a replacement opener or a taller gate panel.
Our Main Camas Services
Three jobs dominate the calls we take from Camas homeowners. Each has its own page with local pricing, failure patterns, and the work included.
Gate Repair in Camas
Swing gates and slide gates both fail here, but for different reasons. Swing gates drop when hinge posts shift in wet, expanding dirt; slide gates bog down when the track fills with fir needles and the V-wheel flattens over time. Our Gate Repair in Camas covers hinge and bracket work, wheel and roller replacement, bent frame straightening, and full re-hang. On most Camas lots we can complete the mechanical side the same visit, because the site conditions are familiar enough that we know what to bring before we see the gate.

Electric Gate Repair in Camas
When the motor runs but the gate does not move, or the gate opens but will not close, the fault is usually electrical. Electric Gate Repair in Camas covers control boards, capacitor failures, limit switches, photo eyes, and low-voltage wiring junctions that have corroded inside conduit after a wet winter. Camas humidity shortens the life of exposed connections, so we inspect every junction in the run when an electric fault is intermittent rather than obvious, and we quote the fix before touching a wire.

Gate Opener Repair in Camas
Opener problems in Camas split between the mechanical and the programmed. Arctic cold here is rare, but week-long rain and high humidity get into circuit boards and rust out micro-switches. Some callers have a keypad that stopped working overnight; others have an opener that reverses mid-cycle because the force settings no longer match what the gate needs. Gate Opener Repair in Camas covers all of it, on every major brand, with the same written quote before any work begins.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Camas
We stock and service Viking, Ghost Controls, DoorKing, and Elite openers, along with the parts that keep older models running. Most common control boards, remotes, and photo eyes are on our trucks or at our local supply line, so a one-trip fix is the rule more than the exception. See our brands for the full list of what we work on.
Pricing for Gate Company in Camas, WA
| Service | Typical range in Camas |
|---|---|
| Gate opener diagnostics and minor adjustments | $95 – $180 |
| Limit switch replacement | $110 – $210 |
| Photo-eye sensor replacement or realignment | $95 – $190 |
| Control board replacement | $240 – $460 plus the board |
| Remote and keypad programming | $65 – $130 |
| Hinge and bracket repair or replacement | $140 – $340 |
| V-wheel and track replacement on a slide gate | $160 – $380 |
| Battery backup replacement | $90 – $220 |
| Full opener replacement, labor only | $280 – $650 |
| Gate panel replacement, labor only | $260 – $700 |
Two things push Camas prices toward the upper end of any range: slope, and corrosion. A gate opener fighting a steep driveway works hotter and fails in ways that often require a control board rather than a simple adjustment, and a corroded junction box can turn a one-hour fix into a two-hour rewire. Whatever the job, you get a written price before we start, and the number on the invoice is the number we agreed to at the door.
Neighborhoods We Serve in Camas
We cover the whole city, from the flats near the Columbia up through Grass Valley and Prune Hill, and everywhere between. Most Camas jobs can be scheduled within a day or two, and repair calls in progress get a live arrival time rather than a four-hour window.
- Lacamas Shores
- Grass Valley
- Prune Hill
- Downtown Camas
- Sierra Lane / NW 16th area
Service Area – Cities Near Camas
Beyond Camas, we serve the surrounding communities with the same pricing and guarantee. That includes Washougal, WA to the east, Vancouver, WA to the southwest, Battle Ground, WA to the north, and Ridgefield, WA up past the fairgrounds. If your gate is inside one of those cities, call and we will schedule you directly.
Serving Camas, WA - Our Local Coverage Area
We’re based in the Camas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Camas
Most non-emergency repairs in Camas are scheduled within one to two business days. We also answer calls live 24/7, so if a gate is stuck open with pets or kids in the yard, we can often dispatch the same day. Call (903) 417-0793 and tell us what the gate is doing and we will give you a real ETA, not a window.
Often yes, and it depends on the association. Many Camas HOAs regulate gate height, material, and finish, and some require written approval for a replacement opener or panel. We will flag what looks regulated before you commit to any work, and the written quote covers only what is allowed at your address.
We do. Older lots near downtown often have single swing gates on hand-set posts that have shifted over time, while the newer subdivisions up Prune Hill tend toward double gates with opener and safety-edge wiring. The tools and parts are the same, but we arrive knowing which version your neighborhood tends to have. Call (903) 417-0793 and we will give you a free estimate over the phone or at the gate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Camas Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.





Before
After
Before
After
Before
After