Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Cameron Park, CA
Calder Gate Repair handles gate repair, electric gate repair, and gate opener repair for homes across Cameron Park, CA. Most Cameron Park jobs come down to three things: older gate openers reaching the end of their life, power supply issues from foothill weather, and gates that shift on sloped lots. We quote a written price before any work starts, so you know exactly what the job costs before we turn the first bolt. Call (903) 417-0793 any time, day or night, and a live person answers.
Why Cameron Park Homes Are Different
Cameron Park sits in the Sierra Nevada foothills at roughly 1,200 to 1,500 feet of elevation, which means three things for gates. First, the soil here expands and contracts with wet winters and hot, dry summers. Gate posts set in that soil move, and a post that moves even half an inch can throw off the gate’s alignment enough to strain the opener motor. Second, Cameron Park is full of undeveloped oak woodland lots and rural residential parcels, so many gates are longer, heavier, and built for privacy rather than simple curb appeal. A 16-foot steel gate on a slope puts far more load on an opener than a flat suburban aluminum gate.
Third, Cameron Park’s tree canopy drops leaves, acorns, and pine needles into gate tracks for months at a time. We regularly pull debris out of track channels on Cambridge Road, Royal Drive, and Country Club Drive properties. That debris is not a cosmetic issue; it causes the gate to bind, trips the limit switch repeatedly, and burns out motors years early. Older homes in Cameron Park, many built in the 1970s and 1980s, often still run original openers. Those units were not designed for the load cycles a modern household puts on them, and most fail at the control board or capacitor first. If your gate stopped responding, call (903) 417-0793 and we’ll walk through the likely cause before scheduling anything.
Our Main Cameron Park Services
These are the three services Cameron Park homeowners call us about most. Each has its own Cameron Park page with deeper detail, pricing, and common failure points.
Gate Repair in Cameron Park
Gate repair in Cameron Park usually means a physical problem: the gate sags, scrapes the ground, won’t close fully, or makes a grinding noise. On sloping driveways along roads like La Canada Drive and Mira Loma Drive, we see hinge welds crack and post brackets loosen because the gate’s weight shifts every time it opens. Our technicians replace hinges, repair or rebuild gate frames, reset posts, and adjust the gate so it travels evenly. The written price you agree to before the repair is the price on the invoice. Learn what a physical gate repair includes on our Gate Repair in Cameron Park page.
Electric Gate Repair in Cameron Park
Electric gate repair covers everything that carries power and signal: the motor, the circuit board, wiring, photocells, and the keypad or intercom. Cameron Park’s winter rain finds its way into poorly sealed junction boxes, and we open up corroded connections on a weekly basis from November through March. A gate that opens but will not close, or closes and immediately reverses, is almost always a sensor or limit switch problem, not a motor problem. The job starts with a diagnosis, and you get the price before the repair. Details are on our Electric Gate Repair in Cameron Park page.
Gate Opener Repair in Cameron Park
Gate opener repair is its own specialty because modern openers are modular: the motor, the control board, the limit switches, the receiver, and the remote. Most failure points are replaceable without swapping the whole unit. In Cameron Park, we stock boards, arms, receivers, and remotes for the heavy-hitters, so many opener repairs are same-visit jobs. Whether the opener is a swing arm, a slide drive, or a jackshaft unit, we identify the dead component, quote the part and labor in writing, and get it done. See the full breakdown on our Gate Opener Repair in Cameron Park page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Cameron Park
We’re factory-familiar with nine major gate opener brands. In Cameron Park we most often repair Viking, Ghost Controls, DoorKing, and Elite units, and we keep common boards, remotes, and limit switches for those brands on the truck. That means many repairs finish in one visit instead of waiting on a parts order. See our full list on our brands page.
Pricing for Gate Company in Cameron Park, CA
These are the ranges Cameron Park homeowners can expect. Every job is quoted in writing before work begins, and the price includes labor and the specific part being installed, never a vague estimate that grows at the door.
| Service | Typical range in Cameron Park |
|---|---|
| Gate opener repair (labor only) | $180 – $340 |
| Gate opener replacement (labor only) | $350 – $650 |
| Electric gate repair (full diagnosis + fix) | $220 – $480 |
| Circuit board replacement | $250 – $550 |
| Limit switch replacement | $140 – $280 |
| Remote programming / receiver fix | $90 – $180 |
| Keypad replacement and install | $120 – $250 |
| Photocell (safety sensor) replacement | $110 – $220 |
| Gate hinge repair or replacement | $160 – $380 |
| Gate track realignment | $150 – $300 |
| Full gate opener system install | $800 – $1,800 |
What pushes a Cameron Park job toward the top of those ranges is access and part availability. A gate opener for a heavy custom steel gate takes longer to align than a standard unit, and the parts cost more. On rural parcels with long driveways, running new low-voltage wire adds time. The price is always agreed before work starts, and it’s the number on your invoice. If the repair fails within 365 days, Calder returns at no charge under the 365-Day Done Right Promise.
Neighborhoods We Serve in Cameron Park
We cover the entire Cameron Park area, from Country Club Drive down to the neighborhoods around Cameron Park Lake and everything east toward Bass Lake Road. Our typical response window in Cameron Park is same-day or next morning for repair calls, depending on when you reach us.
- Cambridge Road area
- Royal Drive and surrounds
- Country Club Drive corridor
- La Canada Drive and Mira Loma Drive
- Cameron Park Lake area
Service Area – Cities Near Cameron Park
Calder Gate Repair is based in the Sacramento area and schedules Cameron Park jobs locally. While this page covers Cameron Park specifically, our teams also serve larger markets across California, from San Francisco, CA to San Jose, CA, down to Los Angeles, CA and San Diego, CA.
Serving Cameron Park, CA - Our Local Coverage Area
We’re based in the Cameron Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cameron Park
Most Cameron Park repair calls are scheduled same-day or the next morning. Because our technicians carry common parts for Viking, Ghost Controls, DoorKing, and Elite openers on the truck, many visits are one-and-done. Call (903) 417-0793 and a live person will confirm a trackable arrival window while you’re on the phone.
Gate opener repair and most gate opener replacements do not require a permit in El Dorado County. The exception is a new gate installation that changes the property’s entry structure, which can require planning review in some rural residential zones. We can tell you whether your job falls into the permit category before you book.
If a repair fails within 365 days, Calder Gate Repair returns at no charge to make it right. It is a written guarantee on every job, not a verbal assurance, and the free second visit is included automatically. You also get a written price before work begins, so the invoice never surprises you.
For a free estimate on gate repair in Cameron Park, CA, call (903) 417-0793. A real person answers, day or night, and we’ll give you a straight answer on cost and timing. Home
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cameron Park Customers Say
"Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.