Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Daly City, CA
Calder Gate Repair is the gate company Daly City homeowners call when a gate stops opening, starts grinding, or just won’t stay closed. Daly City’s mix of hillside lots, salty ocean air, and older 1950s-1970s housing stock creates a specific set of gate problems we see week after week, and we’ve built our whole approach around them. Whether you need a one-time fix or full gate opener replacement, we show up with a written price before any work starts. Call us at (903) 417-0793 and a live person answers, day or night.
Why Daly City Homes Are Different
Daly City gates take a beating from the weather long before the mechanical parts wear out. The fog and salt air rolling in off the Pacific accelerate rust on hinges, tracks, and opener chassis faster than inland neighborhoods see in a decade. We regularly replace corroded limit switches – the small sensors that tell the gate when to stop – on homes in the Westlake and Broadmoor areas, where the marine layer sits longest. Hillside properties in the Southern Hills and St. Francis Heights add another layer: a gate on a slope fights gravity on every cycle, which means opener motors work harder and wear out sooner than they would on flat ground.
Daly City’s housing stock is mostly single-family homes built between the 1940s and 1970s, many with the original driveway gate or an early-generation opener that’s decades old. Those older FAAC and Viking units were built well, but their circuit boards are reaching end of life. Homeowners near Serramonte and Westlake are increasingly replacing boards rather than patching them, and that’s usually the right call. Coastal moisture also means we check grounding and wiring connections on every visit, because corrosion at the terminals is one of the most common silent failures in this city.
Our Main Daly City Services
Most Daly City calls fall into two buckets: the gate itself is physically damaged or misaligned, or the electric opener system that moves it has failed. Each issue has its own page with full details, local pricing, and what to expect.
Gate Repair in Daly City
A sagging or stuck gate in Daly City usually traces back to rusted hinges, shifted posts, or a bent track from years of coastal moisture and daily use. Our Gate Repair in Daly City page covers the full scope: straightening or replacing posts, re-hanging heavy steel and iron gates, cutting back rust, and aligning tracks so the gate slides without dragging. On hillside lots where the ground has settled, we often find the gate has pulled its post out of plumb, and the fix is more than a bolt-tightening job. Every repair carries the 365-Day Done Right Promise in writing.
Electric Gate Repair in Daly City
Electric gate failures in Daly City often come down to the same culprits: corrosion in the wiring, a motor that’s been overworked by slope and salt air, or safety sensors knocked out of alignment by constant fog-related moisture. Our Electric Gate Repair in Daly City page covers everything from wiring diagnostics to full system troubleshooting for FAAC, BFT, Linear, and Viking openers. We test the entire circuit, quote the fix in writing, and make sure the gate’s safety edges and photo eyes work before we leave – not after you discover they don’t.
Gate Opener Repair in Daly City
When the opener itself is the problem – the arm won’t move, the remote stopped working, or the unit hums without engaging – our Gate Opener Repair in Daly City page breaks down the common failures and the exact costs. Daly City’s combination of damp air and steep driveways means opener circuit boards and capacitor failures show up here more than almost anywhere in the Bay Area. We stock common replacement parts for FAAC, BFT, Linear, and Viking units locally, which means faster turnarounds than a generic handyman who has to special-order everything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Daly City
We’re factory-familiar with FAAC, BFT, Linear, and Viking, and we keep the most common replacement boards, arms, and safety sensors in our local stock. That means we’re not ordering your FAAC board from a distributor and hoping it arrives by Thursday. See our brands page for the full list of nine manufacturers we work on daily.
Pricing for Gate Company in Daly City, CA
| Service | Typical range in Daly City |
|---|---|
| Gate opener repair (most common fixes) | $180 – $340 before parts |
| Gate opener replacement (full unit) | $650 – $1,400 installed |
| Electric gate troubleshooting & diagnostics | $95 – $175 |
| Hinge replacement (standard steel gate) | $150 – $350 |
| Gate track realignment | $200 – $450 |
| Circuit board replacement (opener) | $250 – $600 |
| Safety sensor replacement | $120 – $280 |
| Remote or keypad programming | $75 – $150 |
| Post straightening or re-setting | $300 – $700 |
| Full gate replacement (standard single driveway gate) | $1,800 – $4,500 |
Prices in Daly City run slightly higher than inland because coastal corrosion means more labor time on every job, and hillside properties sometimes need extra bracing or longer cable runs. Whatever the number is, you’ll see it in writing and agree to it before we touch a single bolt – the invoice matches the quote, always.
Neighborhoods We Serve in Daly City
We cover all of Daly City, from the flats near Serramonte and Westlake to the hillside streets in Southern Hills and St. Francis Heights. Our typical response time for most Daly City repair calls is same-day or next-day, and we dispatch technicians with live, trackable arrival times so you’re not staring out the window waiting for a four-hour window.
- Westlake
- Broadmoor
- St. Francis Heights
- Southern Hills
- Serramonte
Service Area – Cities Near Daly City
Calder Gate Repair serves Daly City and the surrounding Peninsula communities daily. If your gate is down and you’re just over the city line, we also cover Brisbane, CA, South San Francisco, CA, San Bruno, CA, and Pacifica, CA with the same written-price guarantee and live person on every call.
Serving Daly City, CA - Our Local Coverage Area
We’re based in the Daly City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Daly City
Most Daly City repair calls are handled same-day or next-day. We dispatch from our Bay Area office with a live, trackable arrival time, so you’ll know exactly when the technician pulls up – not a four-hour window. Emergency calls get priority routing to Daly City throughout the day and night.
A straight opener swap on an existing, working gate generally doesn’t require a city permit. If the gate structure itself needs rebuilding or the posts need to be re-set, that can trigger a permit depending on scope. Our technicians can tell you during the estimate whether your job needs city approval or not, and we’ll flag it in the written quote.
If your neighborhood or building has an HOA that maintains common-area gates, we can work directly with the HOA board or property manager. For gates on your own lot, HOA rules don’t apply citywide. We’ll coordinate with whoever makes the decision, send the written quote to the right contact, and keep the digital invoice trail for their records.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Daly City Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.