Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across Bulverde
When your electric gate in Bulverde stops working, you need someone who understands the Hill Country conditions that cause it. Most Bulverde gate repairs come down to power issues, corroded wiring, or a post that has shifted in limestone heavy soil. Electric Gate Repair is what we do every day, and we dispatch locally so you’re not waiting on a crew from an hour away. Call (903) 417-0793 and a live person answers, 24/7, to schedule a background-checked tech with a trackable arrival time.

Why Calder Gate Repair Is Bulverde’s Preferred Electric Gate Repair Company
We’re the gate repair specialist inside the Relay Home Co. family, and that matters here. Bulverde homes sit on large rural lots with long driveways, often with solar powered openers and low-voltage wire runs buried through limestone and clay. A generic repair crew sees a dead gate and starts swapping parts. We see the failure chain: how a drained solar battery on a cloudy stretch makes the whole system look dead when the operator is fine, or how a corroded splice in a long sensor wire causes phantom stops and false reversals.
Our techs at Calder are factory familiar with nine major opener brands, including Linear, Viking, and DoorKing. They arrive in uniform, background checked, with a live arrival time you can track. You get a written price before any work starts, and the invoice never changes at the door. The 365-Day Done Right Promise applies to every repair: if it fails within a year, we return free. That guarantee is written on every job.
Automatic Gate Repair in Bulverde
Automatic Gate Repair in Bulverde often starts with a gate that refuses to close, stops mid-travel, or reverses unexpectedly. Those are the classic symptoms of a system that has lost its edge, usually a failing limit switch (the small sensor that tells the gate when to stop), a weak battery in the opener, or a splice in the safety sensor wiring gone green with corrosion. Our techs trace the actual fault rather than replacing the operator and hoping.
Limit Switch and Travel Reset
On sliding gates, the limit switch controls exactly where the panel stops. When it drifts, the gate overruns or stops short. On swing gates, we check the operator arm and the physical stops. Bulverde’s sloped drives put extra load on these components. A limit switch replacement or travel limit reset typically runs $180 to $320, and it is usually a same-visit fix.
Safety Edge and Photocell Repair
Photocells and safety edges are what keep a gate from closing on a car, a pet, or a person. When a Bulverde gate reverses for no reason, it is often a misaligned photocell or a worn safety edge strip. Replacing a safety edge runs $250 to $450 depending on the gate type. We test every repair under UL 325 standards before we leave.
Electric Gate Motor in Bulverde
Electric Gate Motor work in Bulverde includes diagnosing a motor that hums but does not move, replacing a burned winding, or fitting a new operator when the old one is beyond service. Long low-voltage runs common on Bulverde’s rural lots stress motors differently than short suburban runs: a marginal connection drops voltage to the motor, making it draw more current until something fails.
Swing Gate Motor Replacement
Swing gate motors on Bulverde properties work against wind load and uneven terrain. We set travel limits, torque, and the auto-close timer during every replacement. A new swing gate motor, installed and tested, runs $650 to $1,100 in this market, depending on the gate weight and whether we reuse the existing mounting plate.
Solar Opener Battery and Charge Controller
After consecutive cloudy days, solar gate opener batteries on rural Bulverde lots get tired. The gate may open fine in the afternoon but refuse at 6 a.m. We test the battery under load and inspect the charge controller wiring. A battery replacement typically runs $120 to $260, plus the service call.

Trusted Brands We Service in Bulverde
We work on Linear, Viking, Ghost Controls, and DoorKing openers every week across Bulverde, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. Most common parts, including boards, remotes, and receiver units, are on our trucks or available same-day from local supply. That means less downtime for your gate and fewer return trips for us.
Common Electric Gate Repair Problems We See in Bulverde Homes
- Gate opens partway and stops. We get this call constantly from Bulverde homeowners. Nine times out of ten it is not the motor. It’s a tired solar battery, a corroded splice in the loop detector wire running under the drive, or a limit switch that has drifted. Those long low-voltage runs on rural lots are where trouble hides.
- Gate sags at the hinge post even after hinge adjustment. Limestone and clay ground under sloped Bulverde drives lets the post footing shift. The panel looks bent, but the post itself has moved. We correct the post, not just the panel. Otherwise the sag returns within months.
- Gate reverses for no reason. Long wire runs to photocells and loop detectors corrode at junctions and splice points. That intermittent connection fools the board into thinking something is in the path. We cut out the bad splice, seal the new one, and test the full entrapment sequence.
- Keypad or remote stopped working after a storm. Hill Country thunderstorms and power dips can scramble receiver memory or fry a keypad board. We reprogram or replace the unit fast and show you how to avoid the reset that caused it.
Pricing for Electric Gate Repair in Bulverde, TX
Most electric gate repairs in Bulverde run between $180 and $500 before any major parts. That covers limit switch adjustments, sensor alignment, travel resets, battery replacement, and splice repairs. New swing gate motors typically land between $650 and $1,100 installed. A full operator board replacement can run $350 to $700 depending on brand and model. You get a written price before any work starts, always. Call (903) 417-0793 for a free estimate and an exact quote.
We Also Serve Cities Near Bulverde
Our crew works regularly in Canyon Lake, Schertz, Universal City, and Cibolo. If you live nearby and need Electric Gate Repair in Bulverde level service, dispatch and scheduling coordinate from our Dallas-Fort Worth office, with crews serving Bulverde locally.
Serving Bulverde, TX - Our Local Coverage Area
We’re based in the Bulverde area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Bulverde
Rarely. Most partial open and stop failures in Bulverde trace back to a weak solar battery, a corroded low-voltage splice, or a drifted limit switch, not the motor itself. We diagnose before we replace anything. Call (903) 417-0793 and we will tell you exactly what is failing.
Yes. Those nine brands cover virtually every opener on Bulverde properties, and our techs are factory familiar with the wiring, programming, and failure patterns of each. That means fewer parts thrown at a guess. Call (903) 417-0793.
On Bulverde’s limestone and clay slopes, the post footing underneath the gate shifts over time. The hinge adjusted fine, but the post itself moved, so the panel hangs low again. We correct the post and the panel together. Call (903) 417-0793 and we will look at the footing, not just the hinge.
Yes, under UL 325 and Texas state requirements, an automatic gate needs operational entrapment protection, which means working photocells or a monitored safety edge. We test both on every repair. If you are not sure about yours, call (903) 417-0793 and a tech can check them during a service call.
A full installation, including concrete work for the posts, power run, gate operator, safety edges, and reversal testing, usually takes one to three days depending on the terrain and the gate length. We give a written price and a schedule before any work starts. Call (903) 417-0793 for a free measure and written quote.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family serving Bulverde since 2009.





Before
After
Before
After
Before
After