Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Clermont
Electric gate repair in Clermont usually comes down to three things: the motor, the track or hinges, and the ground under it all. Most jobs we handle in Clermont run between $190 and $420 before parts, and about 70% are completed in a single visit. If your gate is stuck open, stuck shut, or stalling halfway, call (903) 417-0793 and a live person answers. We know the rolling lots off Highway 50, the newer sections around Wellness Way, and the older lakefront properties near Lake Minneola because our crews work them every week.
Why Calder Gate Repair Is Clermont’s Preferred Electric Gate Repair Company
Calder Gate Repair is the dedicated Electric Gate Repair specialist inside the Relay Home Co. family, founded in 2009. Each location is independently owned and operated, and our Clermont customers deal with the same local crew every time they book. We answer calls with a real person, 24/7, not a voicemail or a callback queue. That matters when your gate refuses to close at 9pm and your cars are stuck in the driveway.
Every technician who arrives at a Clermont home is background-checked and uniformed, with a live arrival time you can track from your phone. The Relay Standard means you get before-and-after photos and a digital invoice you pay from a link. Written price upfront, written guarantee on the job, and a free second visit if the repair fails within 365 days. That’s the 365-Day Done Right Promise, and it’s in writing on every work order. Nico Alvarez runs our gate operations and holds every Clermont dispatch to that standard.
Electric Gate Motor in Clermont
Electric Gate Motor replacement in Clermont is most often needed when a swing gate operator has been fighting a sagging hinge post or a slide gate motor has been straining against a settled track. In this part of Lake County, the sandy soil shifts and settles, and that ground movement transmits straight into the operator. A motor that should last 8 to 12 years can burn out in 3 or 4 when the gate geometry changes underneath it. Clermont homeowners ask us to replace motors on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule units every week. We carry common control boards and limit switches in the truck, so most motor jobs are one trip.
Typical electric gate motor repair in Clermont runs $240 to $420 for labor, with new motors ranging from $380 for a basic swing arm to $1,100+ for a commercial-grade slide operator. We quote the number before we turn a wrench.
Motor Diagnosis First
We don’t swap a motor until we’ve checked voltage, load, and the physical movement of the gate. Half the “dead motors” we see in Clermont are actually a power issue or a binding track that finally overloaded the operator.
Operator Replacement Done Right
When a motor does need replacement, we match the operator to the gate’s weight, length, and use pattern. On Clermont’s sloped driveways, that sizing matters more than on flat lots because the motor works harder every cycle.
Gate Access Control in Clermont
Gate Access Control in Clermont covers keypads, remotes, intercoms, vehicle detection loops, and the control board that ties them together. This is where most convenience failures happen: the keypad at the end of the drive near Hammock Ridge stops accepting a code, the remote that worked for years suddenly won’t open the gate from the road, or the system forgets programmed remotes after a power surge. Lake County storms and afternoon lightning are hard on access control electronics, and we replace far more fried control boards here than in more temperate parts of Florida.
Keypad repair in Clermont is usually $120 to $220. Remote control programming or replacement runs $75 to $140. A full access control upgrade, including a new board, keypad, and a pair of remotes, typically lands between $500 and $850. We give you the written price before opening anything up.
Wireless Keypad Reprogramming
Most keypad failures are actually a weak battery or a corroded terminal, not a dead unit. We test first, replace only what’s needed, and reprogram on the spot.
Control Board and Safety Loop Repair
Control boards manage every safety signal on your gate: photocells, edge sensors, and the vehicle loop in the driveway. When a board fails, the gate defaults to safe mode, and that can mean it won’t close properly or reverses unexpectedly. We stock replacement boards for all nine major brands.
Trusted Brands We Service in Clermont
Calder Gate Repair technicians are factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We carry parts for FAAC and BFT swing operators and Linear slide operators because we see them constantly across Clermont’s lakefront and hilltop properties. No guesswork, no ordering a generic board and hoping it fits. The part goes in, the gate runs, and the work carries our 365-Day Done Right Promise.
Common Electric Gate Repair Problems We See in Clermont Homes
- Sinking hinge posts on swing gates. Lake County’s sandy soil doesn’t hold post footings unless they’re poured deep and set in concrete. We see gates that worked perfectly for years suddenly dragging on the latch side because a post has shifted half an inch.
- Binding tracks on sloped driveways. Clermont has plenty of driveways with a grade, and when the ground under a slide gate track settles unevenly, the rack and pinion starts binding. The motor keeps trying to push through it until something gives.
- Photocells knocked out of alignment. Safety photocells sit low on the gate posts, and shifting ground or a grazed post from a landscaper’s mower throws them out of alignment. When they’re not lined up, the gate refuses to close. That’s UL 325 entrapment protection working as designed, but it’s frustrating until it’s corrected.
- Lightning and surge damage to control boards. Afternoon storms roll through Clermont hard. A nearby strike can fry a control board even when the motor itself is fine, and the gate won’t respond to remotes or keypads until the board is replaced.
Pricing for Electric Gate Repair in Clermont, FL
Here are the honest numbers for Clermont. Basic repairs, like realigning a photo eye or replacing a hinge, run $140 to $240. Motor repair or replacement labor is $240 to $420, not counting the operator itself. A full access control refresh with keypad, board, and remotes lands between $500 and $850. Complete electric gate installations on a sloped Clermont lot, including deep concrete footings, power run, safety edges, and reversal testing, start around $2,800 and go up based on gate size, material, and access control features. Every job gets a written price before work starts. The invoice at the end matches the number on the quote at the beginning. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near Clermont
Beyond Clermont, our techs cover Minneola, Groveland, Oakland, and Mascotte. If you’re in one of those areas and your gate is acting up, the same crew that works Clermont will be the one showing up. Same written pricing guarantee, same 365-Day Done Right Promise.
Serving Clermont, FL - Our Local Coverage Area
We’re based in the Clermont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Clermont
In Clermont, the most common cause is a track that settled unevenly on sandy soil, which binds the gate carriage and makes the motor stall at the same spot. We see this constantly on sloped driveways off Highway 50 and in the hills near Minneola. We re-level the track, repair the footing, and test the motor under load. Call (903) 417-0793 if your gate stops at the same spot every day; that repetition is the telltale sign of a settlement problem, not a bad motor.
Most electric gate installations in Clermont require a permit through the City of Clermont Building Department or Lake County, particularly when new low-voltage or line-voltage power is being run to the gate. We can tell you whether your specific project needs one and what the inspection path looks like. We don’t start any installation without the right paperwork in place.
Most electric gate repairs in Clermont are completed in one visit of 60 to 90 minutes. Motor replacements and access control overhauls usually take 2 to 4 hours. If we need a part we don’t have on the truck, we tell you before we leave the driveway, with a real date for the follow-up.
Yes, and this is one of the most common repairs we do in Clermont. We uncover the footing, check the post depth and condition, re-set the post in concrete, and re-align the gate so it swings or slides freely. If the operator was damaged from working against the misalignment, we address that at the same visit. The fix is to deal with the ground first, then the mechanics.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. FAAC and BFT swing operators and Linear slide operators are especially common across Clermont’s residential gates, and we keep repair parts for them stocked and ready. If you’re not sure what brand you have, call (903) 417-0793 and we’ll help identify it from a photo or the model number on the unit.
Clermont gate repair is about more than the motor. The soil moves, the heat cycles are brutal on electronics, and the hills punish anything installed shallow. We measure twice, pour deep, and stand behind the work for a full year. If your gate is misbehaving today, call (903) 417-0793. You’ll get a live person, a real arrival time, and a written price before any work begins.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family, providing electric gate repair in Clermont, FL since 2009.