Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Jersey Village
Electric gate repair in Jersey Village usually costs between $180 and $520 for common opener, keypad, and sensor fixes, with most jobs finished same-day for repair work. We dispatch our Electric Gate Repair crews from our Houston office straight to Jersey Village, and a live person answers the phone at (903) 417-0793 around the clock. Jersey Village gates fail for reasons many other Houston suburbs don’t deal with: the clay soil. We know exactly what to check first, and we’ll give you a written price before any work starts.
Why Calder Gate Repair Is Jersey Village’s Preferred Electric Gate Repair Company
We’re part of the Relay Home Co. family, founded in 2009, and Calder Gate Repair exists for one reason: electric gates. Not garage doors, not fencing, not general handyman work. That focus means our techs have seen the failure modes Jersey Village homeowners deal with over and over again. Aaron Alvarez leads our team, and he’s built Calder around a simple standard: the price on the invoice is the price you agreed to at the door.
Jersey Village residents tell us the same thing after every job. They liked knowing the arrival time to the minute, tracked live from their phone. They liked the before-and-after photos. They liked paying from a digital link instead of chasing a paper receipt. That’s the Relay Standard, and it applies to every gate repair we do in Jersey Village, whether it’s a keypad near Roberts Road or a full opener replacement off Jones Road.
Every Calder tech is background-checked and arrives in uniform. Every job includes the 365-Day Done Right Promise: if the repair fails within a year, we come back free. And we answer calls live 24/7. No voicemail tree. No chat bot.
Electric Gate Motor in Jersey Village
Electric Gate Motor repair in Jersey Village often starts with a question we ask before touching the motor: has the post shifted? Jersey Village’s 1950s to 1970s ranch homes sit on heavy clay that swells with rain and shrinks in dry spells. When a gate post moves even half an inch, the motor works against an off-balance load, overheats, and eventually fails. So before we quote a motor replacement, we check footings, hinges, and panel level. Replacing a motor without fixing the footing just burns the new motor out faster.
Motor Diagnosis and Replacement
When a motor is genuinely bad, we identify the cause first. A stripped gear, a shorted capacitor, a burned control winding. Then we quote replacement with a brand-matched unit. Most gate motor repairs in Jersey Village run $280 to $520 including labor, with the motor itself accounting for roughly half.
How Long a Motor Job Takes
Most motor replacements take half a day on site. We stock common Viking, Ghost Controls, and DoorKing units, so Jersey Village customers usually aren’t waiting on a special order. The work includes disconnecting the opener, removing the old motor, installing the new one, and re-running travel limits.
Gate Access Control in Jersey Village
Gate Access Control in Jersey Village covers everything that tells your gate who’s allowed in: keypads, remotes, vehicle loop detectors, intercoms, and the control board that ties them together. Most Jersey Village homes we visit have one of two setups. Either a simple keypad-and-remote system on a swing gate, or a slide gate with loop detection and a phone-line or wireless intercom. Both fail over time, and both are repairable without replacing the whole opener.
Keypads, Remotes, and Loop Detectors
A dead keypad or an intermittent remote is usually not a board problem. It’s corrosion on the keypad contacts, a failing remote battery connector, or a loop detector that’s drifted out of tune. Keypad repair in Jersey Village typically runs $120 to $245. Replacing a loop detector adds $195 to $335 including the part.
Control Board Repair and Replacement
Board-level problems announce themselves differently: a gate that ignores commands, opens on its own, or cycles without stopping. We test the board’s inputs and outputs before recommending replacement. Control board repair for common brands runs $235 to $495 in Jersey Village, and we always confirm the exact model before quoting the part.
Trusted Brands We Service in Jersey Village
Our techs are factory-familiar with nine major gate opener brands, and we see Viking, Ghost Controls, and DoorKing frequently in Jersey Village. That matters because each brand has its own diagnostic software, wiring conventions, and failure patterns. A Ghost Controls swing arm behaves differently from a Viking rack drive. We carry common parts for these brands locally, which shortens turnaround for Jersey Village homes. If your board is obsolete or discontinued, we’ll tell you straight and find a compatible replacement rather than patching a dying unit.
Common Electric Gate Repair Problems We See in Jersey Village Homes
- Sagging swing gates from shifted hinge posts. Clay soil under Jersey Village expands after rain and contracts in drought. The post moves. The gate panel drags or the opener strains. We re-set posts, re-pour footings, and re-level the panel before touching the operator.
- Slide gate operators jamming after storms. Rack-and-pinion slide gates on muddy tracks collect debris. The operator’s overload trips, and the gate won’t move. We clear the track, check rack alignment, and reset the operator’s limits and force settings.
- Safety photocells and loop detectors that haven’t been tested in years. Older Jersey Village driveway gates often have entrapment protection that’s dead or misaligned. The gate won’t reverse on obstruction. We replace photocells and re-tune loops, then test reversal force under load.
- Control boards fried by power surges. Houston’s storm season brings lightning and grid flickers. A control board on an older opener absorbs that surge and dies. We replace boards and add inline surge protection where the wiring allows.
Pricing for Electric Gate Repair in Jersey Village, TX
Most electric gate repairs in Jersey Village run $180 to $520 before parts, depending on what’s failed. A simple keypad swap is at the low end. A full motor replacement with new limits and force settings sits at the top. Here’s what you can expect:
- Trip charge with diagnosis and written quote: $49 to $89, waived with repair
- Keypad or remote receiver repair: $120 to $245
- Photocell or safety edge replacement: $150 to $285
- Loop detector replacement: $195 to $335
- Gate motor replacement: $280 to $520
- Control board diagnosis and replacement: $235 to $495
You get the full price in writing before we turn the first bolt. The invoice number matches the quote number. Call (903) 417-0793 and we’ll walk the job with you, point by point, so you know what’s broken, what it costs, and how long it takes.
We Also Serve Cities Near Jersey Village
Calder Gate Repair handles Electric Gate Repair in Jersey Village and the surrounding metro, including Houston, San Antonio, Dallas, and Fort Worth. If you’re outside Jersey Village proper, call us and we’ll confirm dispatch availability for your area.
Serving Jersey Village, TX - Our Local Coverage Area
We’re based in the Jersey Village area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Jersey Village
Check the gate panel while the opener is disconnected. If the gate is hard to push by hand, the problem is usually the post or hinge, not the motor. In Jersey Village’s clay soil, shifting post footings are the most common root cause we find when a motor seems “dead” or the gate binds halfway. We inspect post plumb and footing stability before any motor replacement. Call (903) 417-0793 and we’ll diagnose it on site, in writing.
Yes, for most repair work. Motor swaps, keypad repairs, sensor replacements, and board replacements are typically completed in a single visit. We carry common parts for Viking, Ghost Controls, and DoorKing units that serve Jersey Village homes. If your repair needs a part we don’t stock, we’ll quote the timeline before leaving. Call (903) 417-0793 for scheduling.
We service Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule. For Jersey Village specifically, the heavier clay-soil slide gates often run LiftMaster or FAAC rack drives, while swing gates use Viking or Ghost Controls arms. We stock parts and programs for all nine brands. Call (903) 417-0793 and tell us what opener you have; we’ll confirm compatibility before dispatch.
Yes. Modern safety standards require entrapment protection on any automated gate. If your Jersey Village gate doesn’t reverse when something blocks its path, the photocells or edge sensors are either missing, misaligned, or failed. We replace them, then run an obstruction test with the gate under full load. Call (903) 417-0793 for a safety inspection, priced before we start.
Heavy rain pushes clay and debris into the ground track, and the slide gate’s Drive overload protection trips when the gate drags through mud. On Jersey Village parcels with poor drainage off Jones Road and Roberts Road, this happens after every major storm. We clear the track, check the rack and pinion alignment, and reset force settings so the gate isn’t fighting the track. Call (903) 417-0793 and we’ll get it moving again.
Contact Calder Gate Repair in Jersey Village
If your gate won’t open, opens halfway, or doesn’t reverse when it should, call us now at (903) 417-0793. We answer live 24/7, we dispatch to Jersey Village with a tracked arrival time, and we hand you a written price before any work starts. The 365-Day Done Right Promise covers every repair. If it fails within a year, we’re back free.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Jersey Village and the Houston metro.