Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Midlothian
Electric gate repair in Midlothian usually runs $180 – $380 for common opener and sensor faults, and most jobs are finished the same day we arrive. If your gate is stuck, reversing on its own, or refusing to respond to the keypad, call Calder Gate Repair at (903) 417-0793 and a live person will answer, 24/7. We know the gates in Midlothian’s subdivisions and rural acreage tracts because we work on them every week, from HOA-fronted swing gates behind pad-mounted transformers to solar-powered slide gates at the end of gravel driveways.
Nico Alvarez leads our gate repair team, and he insists on one thing above everything else: a written price before a single bolt turns. If it’s not done right, the 365-Day Done Right Promise means we come back free.
Why Calder Gate Repair Is Midlothian’s Preferred Electric Gate Repair Company
Midlothian isn’t a one-kind-of-gate town. Head east toward Lawson Farms and you’ll see swing gates on wrought-iron posts, regulated by HOAs that care about appearance. Drive south and west past the high school toward the unincorporated tracts, and the gates become long slide panels running off solar operators, because trenching conduit for 120-volt power a quarter mile down a driveway doesn’t make financial sense. Calder Gate Repair is the dedicated gate repair specialist inside the Relay Home Co. family, and our techs are factory-familiar with nine major opener brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Dispatch is coordinated from our Dallas-Fort Worth office, and crews serve Midlothian locally.
Our technicians arrive in uniform, background-checked, and you get a live trackable arrival time, not a four-hour window. The Relay Standard is the name we put on the booking-to-invoice experience: a real arrival window you can follow from your phone, before-and-after photos of the repair, and a digital invoice you pay from a link, never a paper surprise.
Every call to (903) 417-0793 reaches a person, not a voicemail tree. At 2 a.m. on a Sunday or 10 a.m. on a Tuesday, a human answers and can book a tech, update a time, or troubleshoot a gate that won’t close. That matters when the gate is the only thing between your driveway and a busy feeder road.
Automatic Gate Repair in Midlothian
Automatic gate repair in Midlothian covers the full system: the opener motor, the control board, the keypad, the remote receivers, the safety photocells, and the physical gate itself. Midlothian homeowners generally need us when a gate stops mid-travel, reverses without reason, or the keypad stops accepting codes. A typical automatic gate repair here runs $180 – $340 for common faults like a failed limit switch, a burnt control board relay, or a misaligned safety sensor, before any significant parts replacement. For bigger jobs, like a hinge post that has shifted on clay soil and bound the leaf, expect more involved work in the $300 – $600 range.
Hinge Post and Footing Movement
North Texas soil is clay-heavy, and Midlothian clay expands and contracts through wet-dry cycles more aggressively than most people expect. A gate that sags, scrapes the ground at the latch end, or trips the operator’s obstruction sensor is usually telling you the footing under the hinge post has moved. Re-hanging the panel without correcting the footing is a repeat call waiting to happen, because the post will keep shifting and the gate will keep binding.
Loop Detectors and Safety Photocells
We also see a lot of loop detector and safety photocell faults on Midlothian gates, especially in the summer when heat cycling and sudden rain showers stress exposed wiring and connectors. The symptom is confusing: the gate refuses to close, closes on a vehicle, or “ghosts” open when nothing is there. When we get that call, we test the photocell alignment, check the loop detector frequency, and replace what’s actually failed, not what we guess might be failing.
Electric Gate Motor in Midlothian
An electric gate motor in Midlothian takes a beating from heat, humidity, and dust from rural roads. When the motor fails, the gate won’t move at all, or it moves a few inches and stops, or it hums but doesn’t budge. Motor replacement on a typical Midlothian swing or slide gate runs $350 – $800 depending on the operator brand, the gate’s weight and length, and whether we’re reusing the existing mounting hardware or starting fresh. We stock and service LiftMaster, Viking, Ghost Controls, and DoorKing motors, plus FAAC and BFT for the heavier hydraulic operators we see on estate properties.
Swing Gate Operators on HOA Properties
Lawson Farms, Kensington, and other master-planned communities in Midlothian favor swing gate operators for front-entry driveway gates, and those setups usually run on 120-volt pad-mounted power. The operator itself may be fine; often the real culprit is a shifted post pulling the arm out of alignment, which overloads the motor and burns out the capacitor or the gear train. We correct the geometry first, then replace the motor if it’s truly gone.
Solar Gate Operators on Rural Tracts
On the multi-acre properties west of Midlothian toward Mountain Peak and south of Highway 287, long driveway slide gates frequently run on solar gate openers with battery backup. When the battery ages out or the solar panel gets shaded or dusty, the gate gets sluggish, then stops working entirely. We test the actual charge voltage at the battery, not just the panel output, and replace the battery and charge controller when needed. In some cases, a hardwired 120-volt run is practical and we’ll quote that option honestly, including conduit and trenching.
Common Electric Gate Repair Problems We See in Midlothian Homes
- Hinge post and footing movement on clay-heavy soil. Midlothian’s clay expands and shrinks with seasonal moisture, and over three to five years a gate that was perfectly hung starts sagging and binding. The operator trips out, the gate reverses, and the homeowner replaces a battery or a keypad that was never the problem. We pull the operator, re-set the post, re-pour the footing, and re-test entrapment reversal before we leave.
- Loop detector and safety photocell faults from heat cycling and moisture. North Texas summers push 100 degrees for weeks, and the temperature swing plus sudden rain causes connectors to corrode and photocell housings to warp. A gate that refuses to close or closes on a vehicle is a safety issue, not an inconvenience, and it’s one we treat as urgent.
- Solar opener and battery failures on rural driveways. On long runs where trenching 120-volt power is impractical, solar gate openers do the heavy lifting. When the battery can’t hold a charge or the panel is covered in dust from a gravel road, the gate stalls out. We service Ghost Controls and Viking solar systems regularly in the rural pockets around Midlothian.
- Control board failures from power surges. Midlothian sits in a storm-active part of the Metroplex. When lightning knocks out the control board, the gate goes dead, and a new board is often the fix. We keep common control boards on the truck for the brands we service, so we’re not waiting on a parts shipment to get your gate moving again.
Pricing for Electric Gate Repair in Midlothian, TX
Here’s what Midlothian homeowners should expect to pay. A service call and diagnostic for an electric gate issue runs $75 – $125. Common opener repairs, like replacing a limit switch, capacitor, or safety photocell, land between $180 and $340. A full gate motor replacement runs $350 – $800 depending on brand and gate type. Control board replacement typically falls between $250 and $500. Solar opener battery replacement runs $120 – $250. These are real ranges for this market, and they include labor; significant parts are quoted separately, in writing. The price we quote at the door is the price on the invoice. If the repair fails within 365 days, the 365-Day Done Right Promise means we return at no charge and fix it. Call (903) 417-0793 for a free estimate, and you’ll have the number in writing before any work starts.
Trusted Brands We Service in Midlothian
Our Electric Gate Repair team is factory-familiar with nine major opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Linear, Viking, Ghost Controls, and DoorKing operators right on the truck, which means we can often finish a Midlothian repair in one visit instead of scheduling a second trip for a part. If your gate runs on a brand that isn’t on that list, call anyway. We’ll tell you honestly whether it’s a repair we’d take on or a replacement we’d recommend, and either way the quote is free.
We Also Serve Cities Near Midlothian
While this page focuses on Midlothian, our crews also cover Electric Gate Repair in Midlothian and the surrounding communities of Cedar Hill, Mansfield, Waxahachie, and Red Oak. If you’re on the edge of Midlothian or just down the road, the same pricing, the same guarantee, and the same live-person answering policy apply.
Serving Midlothian, TX - Our Local Coverage Area
We’re based in the Midlothian area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Midlothian
It’s usually the gate itself, not the motor. On Midlothian’s clay-heavy soil, hinge post and footing movement is the most common cause of a mid-travel reversal; the gate binds, the operator senses resistance as an obstruction, and it reverses for safety. The motor may be fine. A tech needs to check the post footing, the leaf alignment, and the photocell alignment before condemning the operator. Call (903) 417-0793 and we’ll diagnose it on site.
Yes. Automatic gates installed after current in-force code requirements must include entrapment protection, which means safety photo-eyes or an equivalent monitored reversing mechanism. Midlothian follows Texas and UL 325 standards, and we test your gate’s reversal system and photocells as part of every repair, not as an upsell. If your gate lacks working entrapment protection, we’ll flag it and quote the corrective work in writing before anything is done.
We repair LiftMaster and FAAC operators regularly, along with Viking, Ghost Controls, DoorKing, Linear, BFT, Elite, and Mighty Mule. Whether it’s repairable depends on the failure: a burnt capacitor, failed limit switch, or corroded terminal block is usually a quick fix, while a seized gear train or a control board with water damage may justify replacement. We’ll show you the failed part, explain what it does, and give you a written repair vs. replace price before proceeding. Estimates are free.
Most common repairs like sensor realignment, limit switch replacement, or keypad reprogramming take 45 to 90 minutes on site. Motor replacement or hinge post re-setting can take 2 to 4 hours depending on whether concrete work is involved. We carry common parts for the major brands on the truck, which cuts out the parts-wait delay. A realistic timeline for a full gate motor replacement is one visit, sometimes two if a specialty part has to be ordered.
Yes, we service solar gate openers, including Ghost Controls and Viking systems, on the rural acreage tracts in and around Midlothian. Common failures we fix are depleted batteries, corroded charge controllers, and undersized solar panels that can’t keep up with a gate that cycles a dozen times a day. Where trenching 120-volt power to the gate becomes practical, we’ll quote the hardwired conversion and let you compare the two options in writing.
Call Calder Gate Repair in Midlothian
You don’t have to live with a gate that won’t close, won’t open, or reverses on your kid’s car. Call (903) 417-0793 and a live person answers, day or night. We’ll schedule a tech with a trackable arrival time, give you a written price before any work starts, and back the repair with the 365-Day Done Right Promise. If it fails within a year, we come back free and make it right.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Midlothian and the surrounding North Texas communities since 2009.