Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Electric Gate Repair Across North Lynnwood
Electric gate repair in North Lynnwood usually runs $240 – $520 for most operator and sensor issues, and we can typically have a tech at your door the same day you call. If your gate is stuck open, grinding mid-cycle, or refusing to respond to the remote, that’s a security problem and a daily annoyance rolled into one. Calder Gate Repair covers every corner of North Lynnwood with background-checked, uniformed technicians who arrive with a live, trackable ETA, not a four-hour window. Call (903) 417-0793 and you’ll get a real person, 24/7, who can schedule the visit and give you a straight answer on what to expect.

Why Calder Gate Repair Is North Lynnwood’s Preferred Electric Gate Repair Company
We’re the dedicated gate repair arm inside the Relay Home Co. family, established in 2009. That means North Lynnwood homeowners get a specialist, not a general handyman who “also does gates.” Every tech on our team is factory-familiar with nine major opener brands, including Linear, Viking, Ghost Controls, and DoorKing, so the diagnosis is usually made in the first 20 minutes on site.
What sets us apart in North Lynnwood is how we handle the visit itself. You’ll receive a written price before any work starts, and that’s the number on the invoice. No surprises at the door. Every repair carries the 365-Day Done Right Promise: if the repair fails within a year, we return at no charge. That’s stated in writing on every job, and it’s included automatically. It’s not an upsell and it’s not optional.
We know the North Lynnwood gate landscape specifically. Dispatch and scheduling are coordinated from the brand’s Seattle office, but our crews serve North Lynnwood locally, which means we’re not commuting from an hour away when your gate won’t close. Response time to most North Lynnwood neighborhoods is under an hour for emergency calls, and same-day service is available for most repair jobs.
Automatic Gate Repair in North Lynnwood
Automatic gate repair in North Lynnwood most often comes down to either an operator that’s working against a sagging gate, or a safety sensor that’s tripping the system into a fault loop. We address both. The first thing we do on any automatic gate repair call is check whether the gate itself swings or slides true. A gate that’s fighting its own hinges will burn through motors, strip rack teeth, and frustrate everyone who uses the driveway.
For North Lynnwood homeowners, the typical automatic gate repair runs $260 – $480 before parts, depending on whether we’re replacing a capacitor, rewiring a limit switch (the small sensor that tells the gate when to stop), or rebuilding a hinge assembly. We quote the full number before we turn a bolt.
Limit Switch and Travel Adjustment
When an automatic gate stops short or overshoots and reverses, the limit switch is usually the culprit. We set travel limits so the gate closes fully against the stop without slamming, and we test the cycle ten times before we call it done. If the gear rack is worn from misalignment, we’ll show you the wear and quote the replacement at the same visit.
Photo Eye and Safety Loop Diagnostics
Safety photocells, the small beam sensors near the gate posts, are the single most common false-fault source in North Lynnwood. If they’re misaligned, sun-blinded, or never wired in from an old DIY install, the gate behaves erratically even when the motor is fine. We test the entire entrapment protection loop, fix or replace the sensors, and verify the gate reverses under resistance before we leave.
Electric Gate Motor in North Lynnwood
Electric gate motor replacement in North Lynnwood is a job we approach carefully, because the motor is rarely the problem on its own. A LiftMaster or Viking operator that’s overheating, humming, or stalling mid-cycle is often reacting to a structural issue: a gate that sags from post movement, a rack that’s been knocked out of alignment, or voltage drop from corroded connections. We don’t just swap the motor and hope.
For a straight motor replacement on a swing or slide gate in North Lynnwood, expect $480 – $900 depending on the brand and horsepower. The full job includes disconnecting and removing the old unit, installing the new motor, re-tensioning the drive system, setting limits, and testing entrapment safety. We also verify the motor’s torque settings against the weight of the gate, which matters more than people think.
Motor and Gearbox Replacement
If your operator is grinding but the gate creeps along, the gearbox is likely stripped. We replace the motor and gearbox as a matched set when the wear warrants it, then re-grease the drive and reset the open and close limits. A fresh motor on a misaligned gate is a waste of money, so we correct the alignment first.
Capacitor and Control Board Repair
A motor that hums but won’t start often needs a start capacitor replaced, a $90 – $160 part depending on the opener. Control board failures are more involved: we bench-test the board, check for shorted relays, and replace it with the correct revision for your Linear, DoorKing, or Ghost Controls unit. Both jobs get the same upfront written price and the same 365-day guarantee.

Trusted Brands We Service in North Lynnwood
We train on nine major gate opener brands, but the ones we see most in North Lynnwood driveways are LiftMaster, Linear, Viking, Ghost Controls, and DoorKing. That matters because parts availability is half the battle. We stock common gear racks, control boards, capacitors, remote transmitters, and safety photo eyes in our local service vehicles, so most North Lynnwood repairs don’t wait on a parts shipment. If you’re running a lesser-known brand, we’ll source the part and give you a straight timeline before any work is scheduled.
Common Electric Gate Repair Problems We See in North Lynnwood Homes
- Hinge post movement in fill-heavy soil. North Lynnwood’s postwar rambler lots along 164th St SW often have gate posts set in shallow, fill-heavy ground. The gate sags, the rack and pinion misaligns, and the motor gets blamed for a structural problem.
- Safety sensor faults on older installs. Many North Lynnwood swing and slide gates went in before UL 325 entrapment protection was enforced. We find photo-eyes that were never wired in at all, which puts the system in a fault loop and defeats the safety design.
- Wet-season corrosion on low-voltage wiring. On the west side of North Lynnwood, winter runoff sits against the gate posts and corrodes keypad, loop detector, and photo-eye connections. Ground faults here cause intermittent failures that get worse every rainy season.
- Solar battery starvation in winter. Solar gate openers on North Lynnwood properties with panels facing the wrong direction, or sitting under evergreen canopy, never fully recharge during short winter days. The gate stalls mid-cycle or runs the battery flat overnight.
Pricing for Electric Gate Repair in North Lynnwood, WA
Here’s what North Lynnwood homeowners can expect to pay. A service call and diagnosis runs $89, and that amount is waived if you approve the repair. Keypad and remote programming is $75 – $140. Capacitor replacement runs $90 – $160. Limit switch adjustment or replacement is $120 – $220. Control board replacement lands between $280 – $520 depending on brand. Full motor replacement is $480 – $900. Safety sensor replacement with alignment is $150 – $280.
Every estimate includes the written price before work starts, so the number on the invoice matches the number you agreed to at the door. Call (903) 417-0793 for a free estimate on any electric gate repair in North Lynnwood.
Key Takeaways:
- Most electric gate repairs in North Lynnwood run $240 – $520 before parts
- Written price before any work starts, every time
- 365-Day Done Right Promise: free return visit if the repair fails
- Same-day service available for most repair calls in North Lynnwood
- Live person answers the phone 24/7 at (903) 417-0793
We Also Serve Cities Near North Lynnwood
While this page focuses on Electric Gate Repair in North Lynnwood, our crews also serve Seattle, Spokane, Tacoma, and Vancouver. If you live just outside North Lynnwood, give us a call and we’ll route a tech your way with the same straightforward pricing and written guarantee. For a broader look at what we do, see our Electric Gate Repair service page.
Serving North Lynnwood, WA - Our Local Coverage Area
We’re based in the North Lynnwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in North Lynnwood
A full automatic gate installation in North Lynnwood typically takes one to three days, depending on whether we’re setting new posts, running power, or adding ground loops. This is not same-day work, and nobody should sell you an installation on that timeline. We start with a free site visit, measure the gate, assess the soil, and give you a written installation plan with a realistic schedule and full price before anything is ordered. Call (903) 417-0793 to schedule a free measure.
Yes. Every automatic gate in North Lynnwood must meet UL 325 entrapment protection standards, which means working photo-eye sensors and a reversing mechanism that stops the gate if anything is in its path. Many older North Lynnwood installs predate this code, and we regularly find systems where the safety sensors were never wired in. We won’t repair a gate operator without verifying the entrapment loop, because a gate without safety reversal is a liability, not a working gate. We can retrofit the correct sensors on any existing system.
Probably not, and this is the most common misdiagnosis we see in North Lynnwood. The operator is rarely the root cause: the hinge post has usually moved in the fill-heavy soil along the 164th St SW corridor, letting the gate sag and pulling the rack and pinion out of alignment. We reset the post footing, correct the sag, and in most cases the same motor runs clean afterward. We were called to a home off 164th St SW where the homeowner assumed the LiftMaster operator was shot. Our tech found the hinge post had rotated in the soft fill soil, throwing the rack and pinion out of alignment and tripping the safety photocell every cycle. We reset the post footing, corrected the sag, and the same operator has run clean since.
We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators in North Lynnwood. Our techs carry common parts for the brands we see most often here: LiftMaster, Linear, Viking, Ghost Controls, and DoorKing. If you have a different brand, we’ll source the part and give you a realistic timeline before scheduling the repair.
It depends on the panel position and battery condition. Solar gate openers in North Lynnwood struggle through the short winter days when panels face the wrong direction or sit under evergreen canopy, because the batteries never fully recharge. The gate stalls mid-cycle or drains the battery overnight. We can test your panel output, re-aim the array, and replace the battery if it’s past its service life. Call (903) 417-0793 for a solar system check, and we’ll give you a written price for any work that’s needed.
Call Calder Gate Repair for Electric Gate Repair in North Lynnwood
If your gate is acting up in North Lynnwood, call (903) 417-0793. You’ll get a real person, 24/7, who can book the visit, give you a straight answer on cost, and send a tech with a live, trackable arrival time. Every repair gets a written price before work starts, a written 365-day guarantee, and a free second visit if the repair fails. That’s the standard for every North Lynnwood job, no exceptions.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving North Lynnwood customers with electric gate repair through the Relay Home Co. family since 2009.





Before
After
Before
After
Before
After