Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Rocklin
Electric gate repair in Rocklin typically costs $240 – $640 before parts, and most repairs are finished in one visit. Soil movement from Rocklin’s clay-heavy ground causes more gate failures here than motor wear does, and that changes how the repair should be done. If your gate is dragging, binding, or refusing to move, call Calder Gate Repair at (903) 417-0793. A live person answers 24/7, and you’ll get a written price before we touch a bolt.
Why Calder Gate Repair Is Rocklin’s Preferred Electric Gate Repair Company
Rocklin homeowners call us because we treat a gate repair as a structural job, not just a motor swap. The clay soil under neighborhoods like Stanford Ranch, Whitney Ranch, and the older lots off Midas Avenue moves with every wet winter and dry summer. That movement shifts hinge posts and footings, so a gate that worked fine in May drags by October. We know what that does to a LiftMaster or FAAC operator, and we fix the post and the panel before we condemn the motor.
We’re part of the Relay Home Co. family, established 2009, and our technicians arrive in uniform with a live, trackable arrival time and a background check on file. Every repair carries the 365-Day Done Right Promise: if the fix doesn’t hold, we come back within the year at no charge. Rocklin customers get a written price before any work starts, never a surprise invoice. Nico Alvarez leads the team, and the standard hasn’t changed since day one: show up when you say you will, price it in writing, and stand behind the work.
Electric Gate Motor in Rocklin
An electric gate motor in Rocklin does the heavy lifting, but it’s rarely the first thing to fail. When your swing gate sags from post movement or your slide gate’s rack fills with dry-season dust, the motor strains until something gives. We diagnose the full system before recommending a repair, and a typical motor repair in Rocklin runs $280 – $520 for the labor and standard bench time, with new motors or control boards added at cost. If your operator is a Linear or Viking unit, we’re factory-familiar with the internals and usually carry the common parts on the truck.
Track And Limit Switch Correction
A gate that stops short or overtravels usually has a limit switch problem, the small sensor that tells the motor where to stop. We reset or replace those switches and re-test the full open-close cycle. In Rocklin, dust from the dry months packs into these switch housings and causes intermittent faults.
Capacitor And Gearbox Work
When a motor hums but won’t start, the capacitor is the usual suspect, a $40 – $90 part that stores the starting jolt. Gearbox work costs more, typically $350 – $640, because it means tearing down the operator. We’ll show you the worn parts and give you the price before we proceed.
Gate Access Control in Rocklin
Gate access control in Rocklin covers everything that decides who gets in: keypads, remotes, intercoms, and the receiver boards that talk to them. A common Rocklin call is a keypad that works from one side of the driveway but not the other, or a remote that stops working after a hot summer because the receiver board cooked. Access control repairs in Rocklin run $150 – $380 for most keypad and receiver work, with full board replacement at the higher end.
Keypad And Remote Programming
We program and pair most major brands on-site, including Ghost Controls and DoorKing remotes and keypads. If your opener uses rolling code, we’ll walk you through adding new remotes and deleting old ones. A burned-out keypad backlight is often a simple board fix that doesn’t require a full replacement.
Intercom And Entry Wiring
For properties with an intercom or call box at the gate, we trace the low-voltage wiring and repair or replace the run back to the house. Rocklin’s summer heat accelerates wire jacket cracking, especially on south-facing gate posts. We’ll test the full loop and leave you with a working entry system, not a patch job.
Trusted Brands We Service in Rocklin
We service the openers already on Rocklin gates, including Linear, Viking, Ghost Controls, and DoorKing, alongside LiftMaster, FAAC, BFT, Elite, and Mighty Mule. Because Rocklin driveways skew toward swing gates on clay post footings, we stock the Linear and Viking swing-arm parts that fail most often here. You won’t wait a week for a common control board or a safety sensor. If your opener is older or discontinued, we’ll tell you honestly whether a repair makes sense or a replacement is cheaper in the long run. Either way, the price is in writing before we start.
Common Electric Gate Repair Problems We See in Rocklin Homes
- Dragging swing gates from post movement: Rocklin’s clay soil expands in winter and shrinks in summer, wringing the hinge post out of level. The motor still runs fine, but the gate drags on the ground and eventually burns out the operator. We reset the post and re-level the gate at the footing.
- Slide gates packed with dust and debris: Dry-season dust settles into the rack and pinion, and the gate binds mid-travel. The operator strains, the control board faults, and the gate stops halfway. We clear the rack, re-tension the chain, and re-test the limits.
- Missing or bypassed entrapment protection: Many Rocklin gates were installed without proper UL 325 compliant safety photocells and reversal testing. That means the gate won’t stop or reverse if a child or pet is in the path. We install and test the required sensors on every repair.
- Undersized solar and battery systems: Rocklin’s summer heat cooks aging solar gate opener batteries, and low-voltage wiring that ran fine in spring browns out by August. The gate starts a cycle but doesn’t finish it. We size and replace the batteries and test the charging loop.
Pricing for Electric Gate Repair in Rocklin, CA
Most electric gate repairs in Rocklin run $240 – $640 before parts. Here’s what you can expect for common jobs: a diagnostic visit is free with a repair, limit switch replacement runs $140 – $260, keypad and receiver work runs $150 – $380, and a full gate motor replacement with new arms or a new rack typically lands between $850 and $1,400 including parts and installation. Post resetting and re-leveling, which Rocklin’s clay soil makes necessary more often than you’d think, adds $300 – $700 depending on the footing. Every quote is written, and the price you agree to is the price you pay. Call (903) 417-0793 for an exact quote on your gate.
We Also Serve Cities Near Rocklin
Our Electric Gate Repair team covers Rocklin and the surrounding areas, including Roseville, Loomis, Granite Bay, and Citrus Heights. If you’re just over the city line, we’re still your local crew. Learn more about our work in the area on our Electric Gate Repair in Rocklin page.
Serving Rocklin, CA - Our Local Coverage Area
We’re based in the Rocklin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Rocklin
The motor is fine; the hinge post has moved. Rocklin’s clay soil swells in winter and shrinks in the dry season, and that movement tilts the post just enough that the gate panel drags on the ground. The motor keeps working because it’s still strong, but the drag will eventually burn it out. We reset the post, correct the sag at the footing, and re-level the gate. Call (903) 417-0793 and we’ll diagnose it the same visit.
Yes, and it’s not optional. UL 325 requires entrapment protection, which means working safety photocells and a gate that reverses when it meets resistance. Many Rocklin gates were installed before these rules were enforced, or the sensors have since been bypassed or damaged. If your gate is running without working reversal, it’s a safety hazard and a liability. We install and test the required protection on every repair we touch.
A full electric gate installation in Rocklin takes 2 to 5 days depending on the gate type, ground conditions, and whether new conduit and power need to be run. There’s no honest way to do a proper install same-day: the post footing needs to set in Rocklin’s clay before the operator is mounted, or the gate will be out of level within a season. We give you a written schedule and a written price before we start. If someone promises same-day installation, be skeptical.
Almost certainly. We’re factory-familiar with nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We carry common parts for Linear and Viking swing arms on the truck because those are the units most often found on Rocklin driveways. If your opener is discontinued, we’ll tell you and give you a replacement price before you decide anything.
The rack and pinion are packed with dry-season dust and debris. Rocklin’s dry months coat the rack, the gate binds mid-travel, the operator strains, and the control board eventually faults out. We clear the rack, re-tension the chain, and re-test limits and reversal. The fix usually runs $180 – $320 unless the rack teeth are already worn. Call (903) 417-0793 and we’ll get it running quiet again.
Get Your Rocklin Gate Fixed Right, Priced In Writing
If your gate is dragging, binding, or failing to open, don’t wait for the operator to burn out. Call Calder Gate Repair at (903) 417-0793. We serve Rocklin and the surrounding areas with a live person on the phone 24/7, a written price before any work starts, and the 365-Day Done Right Promise on every repair. Nico Alvarez and the team will get your gate running and keep it that way.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Rocklin, CA.